| Tue, 30 Apr 2024 14:58:35 +0200 |
Martin Almquist |
Add interface, not fully compatible.
feature/poroelastic tip
|
| Tue, 30 Apr 2024 14:18:47 +0200 |
Martin Almquist |
Refactor computation of borrowing from C. Update to correct number of boundary points for borrowing from R.
feature/poroelastic
|
| Tue, 30 Apr 2024 13:33:39 +0200 |
Martin Almquist |
Add scheme for Elastic2dVariable, not fully compatible.
feature/poroelastic
|
| Sat, 15 Oct 2022 15:48:20 +0200 |
Vidar Stiernström |
Remove round off zeros from D2Nonequidistant operators
feature/D2_boundary_opt
|
| Fri, 14 Oct 2022 14:42:32 +0200 |
Vidar Stiernström |
Improve on default choice of number of grid points for each block
feature/D2_boundary_opt
|
| Fri, 26 Aug 2022 14:19:29 +0200 |
Vidar Stiernström |
Add support for glue interpolation operators, and separate wave speeds across interfaces
feature/D2_boundary_opt
|
| Fri, 22 Jul 2022 16:37:49 +0200 |
Vidar Stiernström |
Pass logic grid along to diracDiscr
feature/D2_boundary_opt
|
| Fri, 22 Jul 2022 16:34:50 +0200 |
Vidar Stiernström |
Allow passing number of gridlines for each block
feature/D2_boundary_opt
|
| Fri, 22 Jul 2022 16:31:18 +0200 |
Vidar Stiernström |
Fix comment
feature/D2_boundary_opt
|
| Fri, 13 May 2022 13:29:05 +0200 |
Vidar Stiernström |
Add support for using periodic grids.
feature/D2_boundary_opt
|
| Fri, 13 May 2022 13:28:10 +0200 |
Vidar Stiernström |
Add periodic D1 and D2 operators for orders 8,10,12
feature/D2_boundary_opt
|
| Fri, 13 May 2022 13:26:16 +0200 |
Vidar Stiernström |
Add methods for creating grids with different grid point distributions for each coordinate direction, and also supports constructing periodic grids
feature/D2_boundary_opt
|
| Sat, 07 May 2022 10:41:22 +0200 |
Vidar Stiernström |
Calculate width for all orders
feature/D2_boundary_opt
|
| Sat, 07 May 2022 10:40:47 +0200 |
Vidar Stiernström |
Use the logic grid associated with a CurvilinearGrid instead of creating a new one
feature/D2_boundary_opt
|
| Sat, 07 May 2022 10:30:59 +0200 |
Vidar Stiernström |
Add support for RK6
feature/D2_boundary_opt
|
| Wed, 04 May 2022 08:42:13 +0200 |
Vidar Stiernström |
Clarify comments
feature/D2_boundary_opt
|
| Thu, 10 Mar 2022 16:54:26 +0100 |
Vidar Stiernström |
Merge with feature/poroelastic for Elastic schemes
feature/D2_boundary_opt
|
| Thu, 17 Feb 2022 18:55:11 +0100 |
Vidar Stiernström |
Add size checks to the operators
feature/D2_boundary_opt
|
| Mon, 14 Feb 2022 14:55:29 +0100 |
Vidar Stiernström |
Add support for boundary optimized grids in DefCurvilinear, and add boundaryOptimizedCurvilinear for constructing a curvilinear grid with boundary optimized grid point placement.
feature/D2_boundary_opt
|
| Mon, 14 Feb 2022 11:14:46 +0100 |
Vidar Stiernström |
Merge with feature/FMMlabb
feature/D2_boundary_opt
|
| Mon, 14 Feb 2022 10:49:49 +0100 |
Vidar Stiernström |
Fix typo in comment
feature/D2_boundary_opt
|
| Sun, 13 Feb 2022 20:58:35 +0100 |
Vidar Stiernström |
Fix bug when using wide stencils
feature/D2_boundary_opt
|
| Sun, 13 Feb 2022 19:32:34 +0100 |
Vidar Stiernström |
Add variable coefficient boundary-optimized second derivatives.
feature/D2_boundary_opt
|
| Sun, 27 Jun 2021 16:19:28 +0200 |
Martin Almquist |
Bugifx penalty sign.
feature/laplace1d_variable
|
| Sun, 11 Apr 2021 21:10:23 +0200 |
Martin Almquist |
First implementation of Laplace1dVariable. Passes symmetry and definiteness tests.
feature/laplace1d_variable
|
| Sat, 24 Oct 2020 20:58:26 -0700 |
Martin Almquist |
Add Zt to output args for Elastic2dCurvilinearAnisotropic.interfaceNormalTangential
feature/poroelastic
|
| Sat, 01 Aug 2020 17:00:39 -0700 |
Martin Almquist |
Remove warning about normal-tangential BC, because the BC decouple in normal-tangential coordinates
feature/poroelastic
|
| Tue, 28 Jul 2020 21:59:41 -0700 |
Martin Almquist |
Add some interface forcing penalties in ViscoElastic2d
feature/poroelastic
|
| Tue, 28 Jul 2020 21:58:22 -0700 |
Martin Almquist |
Bugfix interface forcing in ElasticCurveAnisotropic
feature/poroelastic
|
| Sun, 26 Jul 2020 20:42:06 -0700 |
Martin Almquist |
Implement normal-tangential interface treatment in viscoElastic2d
feature/poroelastic
|
| Sun, 26 Jul 2020 20:06:06 -0700 |
Martin Almquist |
Add some interface forcing penalties in ElasticCurvilinearAnisotropic
feature/poroelastic
|
| Sun, 26 Jul 2020 20:05:10 -0700 |
Martin Almquist |
Add interfaceForcing method in multiblock.DiffOp to facilitate mms forcing
feature/poroelastic
|
| Sun, 26 Jul 2020 17:38:28 -0700 |
Martin Almquist |
Add new interface method interfaceNormalTangential in Elastic2dCurvilinearAnisotropic.
feature/poroelastic
|
| Sat, 25 Jul 2020 15:56:31 -0700 |
Martin Almquist |
Add traction operators that include the viscous terms and use them to clean up the imposition of traction BC.
feature/poroelastic
|
| Wed, 22 Jul 2020 15:35:25 -0700 |
Martin Almquist |
Add viscoelastic fault interface
feature/poroelastic
|
| Tue, 21 Jul 2020 21:07:37 -0700 |
Martin Almquist |
Add viscoelastic regular interfaces
feature/poroelastic
|
| Mon, 20 Jul 2020 22:21:57 -0700 |
Martin Almquist |
Move common code for displacement and traction BC outside of switch statement
feature/poroelastic
|
| Mon, 20 Jul 2020 22:06:33 -0700 |
Martin Almquist |
Add viscoelastic displacement BC for normal-tangential. Bugfix traction BC for normal-tangential
feature/poroelastic
|
| Mon, 20 Jul 2020 17:45:58 -0700 |
Martin Almquist |
Add displacement BC to viscoelastic
feature/poroelastic
|
| Sun, 19 Jul 2020 21:24:48 -0700 |
Martin Almquist |
Add viscoElastic traction bc for normal-tangential
feature/poroelastic
|
| Sun, 19 Jul 2020 20:30:16 -0700 |
Martin Almquist |
Add diffOp for viscoElastic
feature/poroelastic
|
| Sun, 19 Jul 2020 20:29:48 -0700 |
Martin Almquist |
Add transformation gradient as property in CurvilinearAnisotropic
feature/poroelastic
|
| Mon, 13 Jul 2020 14:21:41 -0700 |
Martin Almquist |
Clean up hollow D2 generation by using precomputed coefficients stored in mat files
feature/poroelastic
|
| Sat, 11 Jul 2020 07:25:06 -0700 |
Martin Almquist |
Improve performance for the hollow case
feature/poroelastic
|
| Sat, 11 Jul 2020 06:54:15 -0700 |
Martin Almquist |
Make the hollow scheme generation more efficient by introducing the D2VariableHollow opSet
feature/poroelastic
|
| Fri, 10 Jul 2020 20:24:23 -0700 |
Martin Almquist |
Add the hollow option to the anisotropic diffops
feature/poroelastic
|
| Wed, 08 Jul 2020 19:11:04 +0200 |
Vidar Stiernström |
Fix incorrect package name.
default
|
| Wed, 08 Jul 2020 18:22:54 +0200 |
Vidar Stiernström |
Merge in feature/boundary_optimized_grids
|
| Wed, 08 Jul 2020 18:20:57 +0200 |
Vidar Stiernström |
Closed branch feature/boundary_optimized_grids
feature/boundary_optimized_grids
|
| Tue, 07 Jul 2020 16:23:44 +0200 |
Vidar Stiernström |
Improve comments
feature/boundary_optimized_grids
|
| Tue, 07 Jul 2020 16:08:08 +0200 |
Vidar Stiernström |
Change +sbp/+util/ to +sbp/+grid and change function names to camel case
feature/boundary_optimized_grids
|
| Tue, 07 Jul 2020 16:00:24 +0200 |
Vidar Stiernström |
Fix typos in comments
feature/boundary_optimized_grids
|
| Thu, 02 Jul 2020 20:05:50 -0700 |
Martin Almquist |
Add displacement BC on normal tangential components, but it is only provably stable if traction bc are used for the other component.
feature/poroelastic
|
| Thu, 02 Jul 2020 15:00:21 -0700 |
Martin Almquist |
Add frictional fault interface in Elastic2dAnisotropicCurve
feature/poroelastic
|
| Mon, 29 Jun 2020 15:26:36 -0700 |
Martin Almquist |
Merge heads.
feature/poroelastic
|
| Mon, 29 Jun 2020 15:24:21 -0700 |
Martin Almquist |
Merge heads
feature/poroelastic
|
| Mon, 29 Jun 2020 15:23:01 -0700 |
Martin Almquist |
Add normal-tangential traction BC ElasticCurvilinearAnisotropic
feature/poroelastic
|
| Wed, 01 Jul 2020 17:34:40 +0200 |
Vidar Stiernström |
Add option to pass a boundary optimized grid to Rectangle.getGrid
feature/boundary_optimized_grids
|
| Wed, 01 Jul 2020 15:15:30 +0200 |
Vidar Stiernström |
Add utility function for constructing a (possibly multidimensional) grid based on the grid points used by the boundary optimized SBP operators
feature/boundary_optimized_grids
|
| Wed, 01 Jul 2020 15:13:36 +0200 |
Vidar Stiernström |
Error-check format of limit arguments
feature/boundary_optimized_grids
|
| Wed, 01 Jul 2020 14:54:21 +0200 |
Vidar Stiernström |
Make accurate/minimalBoundaryOptimizedGrid take the domain limits as input
feature/boundary_optimized_grids
|
| Wed, 01 Jul 2020 13:43:32 +0200 |
Vidar Stiernström |
Make D1Nonequidistant use the grid generation functions accurate/minimalBoundaryOptimizedGrid and remove grid generation from +implementations
feature/boundary_optimized_grids
|
| Wed, 01 Jul 2020 11:15:57 +0200 |
Vidar Stiernström |
Add utility functions for constructing the grids used by the boundary optimized D1Nonequidistant opsets
feature/boundary_optimized_grids
|
| Wed, 01 Jul 2020 17:44:34 +0200 |
Vidar Stiernström |
New branch for developing grids based on the boundary optimized sbp opertors
feature/boundary_optimized_grids
|
| Tue, 23 Jun 2020 13:31:01 -0700 |
Martin Almquist |
Bugfix in Elastic2dVariable
feature/poroelastic
|
| Mon, 15 Jun 2020 16:11:35 -0700 |
Martin Almquist |
Make forcingSetup return empty array instead of zero function if all boundary data functions are empty.
feature/poroelastic
|
| Sun, 07 Jun 2020 11:33:44 -0700 |
Martin Almquist |
Add working implementation of Elastic2dStaggeredCurvilinearAnisotropic, which wraps around the Cartesian anisotropic scheme.
feature/poroelastic
|
| Sun, 07 Jun 2020 11:32:19 -0700 |
Martin Almquist |
Add bcSetup for staggered, where displacement and traction data must be evaluated on different grids.
feature/poroelastic
|
| Sun, 07 Jun 2020 11:30:49 -0700 |
Martin Almquist |
Add interfaces in Elastic2dStaggeredAnisotropic
feature/poroelastic
|
| Sun, 07 Jun 2020 11:28:22 -0700 |
Martin Almquist |
Add extra input pars to multiblock/Grid.getBoundary(), to be able to use the Staggered getBoundary method
feature/poroelastic
|
| Sun, 07 Jun 2020 11:26:40 -0700 |
Martin Almquist |
Add better getBoundary method in grid/Staggered
feature/poroelastic
|
| Sun, 07 Jun 2020 11:22:29 -0700 |
Martin Almquist |
Fix typos in comments
feature/poroelastic
|
| Wed, 03 Jun 2020 10:29:53 -0700 |
Martin Almquist |
Change metric computation in CurvilinearUpwind so that one can use odd orders for the diffOp
feature/poroelastic
|
| Tue, 02 Jun 2020 11:44:38 -0700 |
Martin Almquist |
Add support for plotting and evaluating on curvilinear multiblock staggered grids
feature/poroelastic
|
| Mon, 01 Jun 2020 19:00:31 -0700 |
Martin Almquist |
Correct error messages in lebedev2d
feature/poroelastic
|
| Sun, 31 May 2020 21:59:09 -0700 |
Martin Almquist |
Set default stiffness tensors to 0 in CurvilinearAnisotropic schemes
feature/poroelastic
|
| Sun, 31 May 2020 21:58:40 -0700 |
Martin Almquist |
Allow using D1 D1 in VariableAnisotropicUpwind
feature/poroelastic
|
| Sun, 31 May 2020 20:18:45 -0700 |
Martin Almquist |
In CruvilinearAnisotropicUpwind: Make D1Upwind default opSet. Use D2Standard for metric derivatives. Bugfix global quadrature.
feature/poroelastic
|
| Sun, 31 May 2020 20:16:54 -0700 |
Martin Almquist |
Add class for upwind D1 based on the standard norm matrices
feature/poroelastic
|
| Wed, 27 May 2020 16:44:19 -0700 |
Martin Almquist |
Add Elastic2dVariableAnisotropicMixedStencil
feature/poroelastic
|
| Thu, 30 Apr 2020 21:19:47 -0700 |
Martin Almquist |
Add preallocation for D in StaggeredAnisotropic
feature/poroelastic
|
| Thu, 30 Apr 2020 20:55:26 -0700 |
Martin Almquist |
Add displacement BC in StaggeredAnisotropic
feature/poroelastic
|
| Thu, 30 Apr 2020 11:30:55 -0700 |
Martin Almquist |
Start working on displacement bc, clean up traction.
feature/poroelastic
|
| Wed, 29 Apr 2020 21:05:01 -0700 |
Martin Almquist |
Add staggered Lebedev scheme for Cartesian anisotropic. Traction BC work!
feature/poroelastic
|
| Wed, 29 Apr 2020 21:04:06 -0700 |
Martin Almquist |
Add helper function for 2d Lebedev grid
feature/poroelastic
|
| Wed, 29 Apr 2020 21:03:28 -0700 |
Martin Almquist |
Rename the Staggered1d grid class Staggered
feature/poroelastic
|
| Wed, 29 Apr 2020 21:02:05 -0700 |
Martin Almquist |
Fix bug with incorrect grids returned by D1StaggeredUpwind
feature/poroelastic
|
| Wed, 29 Apr 2020 21:01:09 -0700 |
Martin Almquist |
Remove dummy line in Eastic2dVariableAnisotropic.
feature/poroelastic
|
| Tue, 14 Apr 2020 17:50:49 -0700 |
Martin Almquist |
Add staggered operators and 1D grids
feature/poroelastic
|
| Fri, 13 Mar 2020 12:07:00 +0100 |
Vidar Stiernström |
Speed up computations using RungeKuttaSecondOrder when only the source term is time dependent.
feature/FMMlabb
|
| Wed, 12 Feb 2020 13:27:27 +0100 |
Vidar Stiernström |
Assert that the inner radius is positive
feature/FMMlabb
|
| Tue, 11 Feb 2020 19:17:49 +0100 |
Vidar Stiernström |
Minor cleanup
feature/FMMlabb
|
| Wed, 22 Jan 2020 16:10:46 +0100 |
Ylva Rydin |
Fix boundary groups
feature/FMMlabb
|
| Wed, 22 Jan 2020 15:18:11 +0100 |
Ylva Rydin |
Add annulus
feature/FMMlabb
|
| Tue, 04 Feb 2020 10:15:42 -0800 |
Martin Almquist |
Make Elastic2dVariable faster and more memory efficient
feature/poroelastic
|
| Tue, 07 Jan 2020 12:49:09 -0800 |
Martin Almquist |
Add (temporary) fix for e-s , w-n, and x-x couplings
feature/poroelastic
|
| Wed, 20 Nov 2019 14:26:57 -0800 |
Vidar Stiernström |
Merge in latest changes from default
feature/volcano
|
| Wed, 20 Nov 2019 22:24:06 +0000 |
Vidar Stiernström |
Merged in feature/dirac_discr (pull request #17)
|
| Wed, 20 Nov 2019 22:24:06 +0000 |
Vidar Stiernström |
Close branch feature/dirac_discr
feature/dirac_discr
|
| Wed, 20 Nov 2019 14:12:55 -0800 |
Vidar Stiernström |
Clean up hypsyst3d; use functionality from grid module and remove obsolete properties. Store operators for different coord dirs in cell arrays.
feature/volcano
|
| Wed, 20 Nov 2019 21:05:37 +0100 |
Jonatan Werpers |
Merge in default
feature/dirac_discr
|
| Wed, 20 Nov 2019 21:02:06 +0100 |
Jonatan Werpers |
Apply some nitpicking
feature/dirac_discr
|
| Wed, 20 Nov 2019 20:30:45 +0100 |
Jonatan Werpers |
Avoid indentation of whole function
feature/dirac_discr
|
| Wed, 20 Nov 2019 20:22:53 +0100 |
Jonatan Werpers |
Use assertType instead of assert(isa(...))
feature/dirac_discr
|
| Tue, 19 Nov 2019 17:11:33 -0800 |
Martin Almquist |
Use rng(1) to set seed in diracDiscrTest because hex-speak crashed.
feature/dirac_discr
|
| Tue, 19 Nov 2019 17:04:32 -0800 |
Martin Almquist |
Merge heads
feature/dirac_discr
|
| Tue, 19 Nov 2019 17:01:38 -0800 |
Martin Almquist |
Turn row vectors into column vectors in diracDiscr comments
feature/dirac_discr
|
| Tue, 19 Nov 2019 16:59:11 -0800 |
Martin Almquist |
Factor out Jacobian computation in diracDiscrCurve.m
feature/dirac_discr
|
| Tue, 19 Nov 2019 16:21:26 -0800 |
Vidar Stiernström |
Minor clean up
feature/dirac_discr
|
| Tue, 19 Nov 2019 16:06:03 -0800 |
Vidar Stiernström |
Merge with refactorization of computing source indices
feature/dirac_discr
|
| Wed, 20 Nov 2019 00:13:56 +0100 |
Jonatan Werpers |
Remove overloading of norm() and fnorm
feature/dirac_discr
|
| Wed, 20 Nov 2019 00:10:30 +0100 |
Jonatan Werpers |
Attempt to factor out a function for finding indecies of the source
feature/dirac_discr
|
| Tue, 19 Nov 2019 23:51:32 +0100 |
Jonatan Werpers |
Make all if-branches have the same order of variable assignments
feature/dirac_discr
|
| Tue, 19 Nov 2019 15:16:08 -0800 |
Vidar Stiernström |
- Pass grids to diracDiscr and adjust tests.
feature/dirac_discr
|
| Tue, 19 Nov 2019 13:55:43 -0800 |
Vidar Stiernström |
Merge in curvilinear discr of dirac delta
feature/dirac_discr
|
| Tue, 19 Nov 2019 13:54:41 -0800 |
Vidar Stiernström |
Clean up diracDiscr, remove obsolete tests.
feature/dirac_discr
|
| Mon, 18 Nov 2019 17:17:16 -0800 |
Vidar Stiernström |
Add opSet to Hypsyst3d
feature/volcano
|
| Tue, 19 Nov 2019 13:47:17 -0800 |
Martin Almquist |
Add diracDiscrCurve.m
feature/dirac_discr
|
| Tue, 19 Nov 2019 10:56:57 -0800 |
Martin Almquist |
Add multi-d dirac discretization with tests
feature/dirac_discr
|
| Mon, 18 Nov 2019 10:31:58 -0800 |
Vidar Stiernström |
Utilize grid module in Hypsyst3d. Pass cartesian grid and replace some of the previous functionality in Hypsyst3d with properties/methods for cartesian grids.
feature/volcano
|
| Sat, 16 Nov 2019 14:26:06 -0800 |
Martin Almquist |
Add Upwind ElasticAnisotropic schemes. Seem to work really well!
feature/poroelastic
|
| Tue, 12 Nov 2019 09:00:48 -0800 |
Vidar Stiernström |
Add missing properties and methods to Hypsyst3D and Hypsyst3Dcurve. Note: These functions are NOT implemented properly and mearly work as place holders.
feature/volcano
|
| Wed, 06 Nov 2019 14:52:07 +0100 |
Vidar Stiernström |
Make sure matrices are sparse.
feature/rv
|
| Wed, 06 Nov 2019 14:51:33 +0100 |
Vidar Stiernström |
Use fine-to-coarse interpolation operators in coarse grid flux discretization
feature/rv
|
| Mon, 05 Aug 2019 10:48:37 +0200 |
Vidar Stiernström |
Closing branch
rv_diffOp_test
|
| Tue, 05 Mar 2019 10:59:39 +0100 |
Vidar Stiernström |
Merge bug fix from feature/rv
rv_diffOp_test
|
| Tue, 05 Mar 2019 10:56:29 +0100 |
Vidar Stiernström |
Attempt to reduce unnessecary operations when using the RV diffOps. Does not seem to improve efficiency at this stage.
rv_diffOp_test
|
| Wed, 13 Nov 2019 23:36:19 +0000 |
Martin Almquist |
Merged in feature/d2_compatible (pull request #15)
|
| Wed, 13 Nov 2019 23:36:19 +0000 |
Martin Almquist |
Close branch feature/d2_compatible
feature/d2_compatible
|
| Wed, 13 Nov 2019 15:35:27 -0800 |
Martin Almquist |
Merge with default
feature/d2_compatible
|
| Wed, 13 Nov 2019 14:54:22 -0800 |
Martin Almquist |
Improve efficiency of construction of D2(b) by precomputing as much as possible
feature/d2_compatible
|
| Wed, 13 Nov 2019 22:13:20 +0000 |
Martin Almquist |
Merged in feature/joingrids (pull request #16)
|
| Wed, 13 Nov 2019 22:13:20 +0000 |
Martin Almquist |
Close branch feature/joingrids
feature/joingrids
|
| Mon, 21 Oct 2019 18:08:22 -0700 |
Martin Almquist |
Add stress operators to scheme anisotropic curvilinear
feature/poroelastic
|
| Mon, 14 Oct 2019 13:54:50 -0700 |
Martin Almquist |
Add physical normals to AnisotropicCurvilinear
feature/poroelastic
|
| Mon, 14 Oct 2019 13:49:50 -0700 |
Martin Almquist |
Add new implementation of Laplace curvilinear
feature/poroelastic
|
| Fri, 27 Sep 2019 13:18:09 -0700 |
Martin Almquist |
Add physical derivatives Dx and Dy to ElasticCurvilinearAnisotropic
feature/poroelastic
|
| Sun, 22 Sep 2019 19:05:17 -0700 |
Martin Almquist |
Add CG interface coupling
feature/laplace_curvilinear_test
|
| Fri, 20 Sep 2019 15:38:39 -0700 |
Martin Almquist |
Swap indices in anisotropic curvilinear
feature/poroelastic
|
| Fri, 20 Sep 2019 15:00:19 -0700 |
Martin Almquist |
Merge heads
feature/poroelastic
|
| Fri, 20 Sep 2019 14:57:02 -0700 |
Martin Almquist |
Swap indices and fix bug in ElasticVariableAnisotropic
feature/poroelastic
|
| Sun, 15 Sep 2019 14:39:42 -0700 |
Martin Almquist |
Fix performance (full matrices) issues in ElasticVariableAnisotropic
feature/poroelastic
|
| Sat, 07 Sep 2019 13:05:26 -0700 |
Martin Almquist |
Add scheme for anisotropic curvilinear
feature/poroelastic
|
| Fri, 06 Sep 2019 14:21:18 -0700 |
Martin Almquist |
Add anisotropic interface
feature/poroelastic
|
| Thu, 05 Sep 2019 17:10:58 -0700 |
Martin Almquist |
Update comments in Anisotropic
feature/poroelastic
|
| Thu, 05 Sep 2019 16:41:49 -0700 |
Martin Almquist |
Make Anisotropic work for mixed displacement/traction BC at the same boundary.
feature/poroelastic
|
| Thu, 05 Sep 2019 14:13:00 -0700 |
Martin Almquist |
Add fully compatible D2Variable opSet and first implementation of ElasticAnisotropic
feature/poroelastic
|
| Thu, 22 Aug 2019 11:55:35 -0700 |
Martin Almquist |
Fix spelling mistake in comments.
feature/poroelastic
|
| Sat, 17 Aug 2019 16:20:07 -0700 |
Martin Almquist |
Add multiblock.joinGrids, which joins several multiblock grids into one.
feature/joingrids
|
| Fri, 16 Aug 2019 14:30:28 -0700 |
Martin Almquist |
Add OpSet for fully compatible D2Variable, created from regular D2Variable by replacing d1 by first row of D1. Formal reduction by one order of accuracy at the boundary point.
feature/d2_compatible
|
| Wed, 07 Aug 2019 15:23:42 +0200 |
Vidar Stiernström |
Merge with default
feature/rv
|
| Wed, 07 Aug 2019 13:28:21 +0200 |
Vidar Stiernström |
Add option to discretize Burgers1d using quasi-linear form
feature/rv
|
| Wed, 07 Aug 2019 13:27:36 +0200 |
Vidar Stiernström |
Add higher order approximations to BDFDerivative
feature/rv
|
| Mon, 05 Aug 2019 10:45:08 +0200 |
Vidar Stiernström |
Comment out filtering option in ResidualViscosity
feature/rv
|
| Mon, 29 Jul 2019 16:44:21 +0200 |
Vidar Stiernström |
Add options for postprocessing RV
feature/rv
|
| Mon, 29 Jul 2019 16:43:39 +0200 |
Vidar Stiernström |
Fix indentation
feature/rv
|
| Mon, 29 Jul 2019 16:43:08 +0200 |
Vidar Stiernström |
Change to use the interpolation operators in sbplib
feature/rv
|
| Mon, 08 Jul 2019 15:12:19 +0200 |
Vidar Stiernström |
Refactor constructDiffops and remove closures from some of the diffops used to compute the residual.
feature/rv
|
| Mon, 08 Jul 2019 14:50:46 +0200 |
Vidar Stiernström |
Add missing semicolon
feature/rv
|
| Mon, 08 Jul 2019 14:50:19 +0200 |
Vidar Stiernström |
Rename class property grid to g, to avoid confusion with grid package
feature/rv
|
| Mon, 08 Jul 2019 14:48:56 +0200 |
Vidar Stiernström |
Allow for time dependent data when construcing the ODE RHS
feature/rv
|
| Fri, 05 Jul 2019 19:08:37 +0200 |
Vidar Stiernström |
Add 1d shapiro filter function to ResidualViscosity
feature/rv
|
| Fri, 05 Jul 2019 18:12:10 +0200 |
Vidar Stiernström |
Fix incorrect of RungekuttaRvInstage
feature/rv
|
| Fri, 05 Jul 2019 17:51:11 +0200 |
Vidar Stiernström |
Move specialized constructDiffOps* into constructDiffOps.m. Add multigrid RV using the standard RungekuttaRV time stepper
feature/rv
|
| Fri, 05 Jul 2019 17:48:54 +0200 |
Vidar Stiernström |
Add RungekuttaRv to getRvTimesteppers
feature/rv
|
| Fri, 05 Jul 2019 17:47:13 +0200 |
Vidar Stiernström |
Add standard RungekuttaRv
feature/rv
|
| Fri, 05 Jul 2019 16:51:05 +0200 |
Vidar Stiernström |
Move instage rungekutta time stepping to RungekuttaRvInstage
feature/rv
|
| Fri, 05 Jul 2019 16:49:19 +0200 |
Vidar Stiernström |
Add missing semicolons
feature/rv
|
| Fri, 28 Jun 2019 17:24:01 +0200 |
Vidar Stiernström |
Add getTimestepper for the RV time steppers
feature/rv
|
| Fri, 28 Jun 2019 15:13:44 +0200 |
Vidar Stiernström |
Add wrapper function calling constructDiffOps* for a specified RV method
feature/rv
|
| Fri, 28 Jun 2019 15:11:45 +0200 |
Vidar Stiernström |
Fix bug in constructDiffOpsMultiGrid
feature/rv
|
| Fri, 28 Jun 2019 13:50:04 +0200 |
Vidar Stiernström |
Update comments for RungekuttaRvMultiStage/Grid
feature/rv
|
| Fri, 28 Jun 2019 13:36:03 +0200 |
Vidar Stiernström |
Not a viable idea. Closing branch.
feature/rv
|
| Fri, 28 Jun 2019 13:33:49 +0200 |
Vidar Stiernström |
Update variable names and comments in RungekuttaRvMultiGrid
feature/rv
|
| Fri, 28 Jun 2019 13:24:45 +0200 |
Vidar Stiernström |
Remove obsolete function
feature/rv
|
| Fri, 28 Jun 2019 13:22:03 +0200 |
Vidar Stiernström |
Dont return penalty terms from operators on coarse grid. One can use the penalty terms constructed for the fine grid
feature/rv
|
| Fri, 28 Jun 2019 13:18:58 +0200 |
Vidar Stiernström |
Actually return coarse grid operators from constructDiffOpsMultiGrid
feature/rv
|
| Fri, 28 Jun 2019 13:14:59 +0200 |
Vidar Stiernström |
Fix incorrect filename
feature/rv
|
| Fri, 28 Jun 2019 13:13:17 +0200 |
Vidar Stiernström |
Rename RungekuttaRV time steppers. Add RungekuttaRVMultiStage time stepper
feature/rv
|
| Fri, 28 Jun 2019 13:12:29 +0200 |
Vidar Stiernström |
Add method for constructing diffops to multistage approach of computing the residual viscosity. Differentiate between constructDiffOpsMultiGrid and constructDiffOpsMultiStage
feature/rv
|
| Fri, 28 Jun 2019 12:53:47 +0200 |
Vidar Stiernström |
Make constructDiffOps return a struct with the operators
feature/rv
|
| Thu, 27 Jun 2019 17:15:11 +0200 |
Vidar Stiernström |
Add function for constructing differential operator on coarser mesh. Not sure if it will be usefull tho.
feature/rv
|
| Thu, 27 Jun 2019 17:14:30 +0200 |
Vidar Stiernström |
Pass RHS of unstabilized ode to RKExterirorRvMg
feature/rv
|
| Thu, 27 Jun 2019 17:13:28 +0200 |
Vidar Stiernström |
Remove unnecessary variable
feature/rv
|
| Thu, 27 Jun 2019 11:04:34 +0200 |
Vidar Stiernström |
Move all functions in constructDiffOps to subpackage and refactor
feature/rv
|
| Thu, 27 Jun 2019 11:03:40 +0200 |
Vidar Stiernström |
Add missing semicolons
feature/rv
|
| Tue, 25 Jun 2019 17:00:27 +0200 |
Vidar Stiernström |
Use same order for both time derivative and flux term when computing the residual
feature/rv
|
| Tue, 25 Jun 2019 16:52:54 +0200 |
Vidar Stiernström |
First attempt at multi-grid calculation of the residual
feature/rv
|
| Tue, 25 Jun 2019 15:04:53 +0200 |
Vidar Stiernström |
Fix bug using 2d maximum neighborhood in 1d
feature/rv
|
| Tue, 25 Jun 2019 14:14:25 +0200 |
Vidar Stiernström |
Add option to compute maximum neighbordhood residual
feature/rv
|
| Tue, 25 Jun 2019 13:24:01 +0200 |
Vidar Stiernström |
Add residual order as an input argument to constructDiffOps
feature/rv
|
| Tue, 25 Jun 2019 13:06:42 +0200 |
Vidar Stiernström |
Attempt to fix oscilations when not using bdfs by adding lower-order 2nd derivative correction term to the Residual
feature/rv
|
| Mon, 24 Jun 2019 17:44:21 +0200 |
Vidar Stiernström |
Change penalty term and add missing semicolon
feature/rv
|
| Wed, 06 Mar 2019 09:45:52 +0100 |
Vidar Stiernström |
Improve efficiency of diffOps in Burgers2d, the artificial diffusion operator in rv.constructDiffOps and the RungekuttaExteriorRv time-steppers
feature/rv
|
| Tue, 05 Mar 2019 10:57:26 +0100 |
Vidar Stiernström |
Fix bug in Burgers schemes resulting in incorrect wave speed.
feature/rv
|
| Tue, 05 Mar 2019 10:53:34 +0100 |
Vidar Stiernström |
Clean up in +rv/+time. Make the time stepping more efficient by not storing unnessecary properties in the RK-RV time steppers
feature/rv
|
| Mon, 18 Feb 2019 09:00:00 +0100 |
Vidar Stiernström |
Set RV artificial viscosity to zero around borders of the domain
feature/rv
|
| Thu, 24 Jan 2019 10:23:52 +0100 |
Vidar Stiernström |
Implement local residual normalization functions
feature/rv
|
| Thu, 24 Jan 2019 09:05:44 +0100 |
Vidar Stiernström |
Change Burgers2d to inviscid formulation. Rewrite to use opSets and fix the implementation of the Dirichlet conditions.
feature/rv
|
| Thu, 24 Jan 2019 09:01:10 +0100 |
Vidar Stiernström |
Implement the correct Dirichlet conditions for Burgers1d
feature/rv
|
| Sat, 19 Jan 2019 17:22:09 +0100 |
Vidar Stiernström |
Rename scheme according to conventions
feature/rv
|
| Sat, 19 Jan 2019 17:20:14 +0100 |
Vidar Stiernström |
Add missing semicolon
feature/rv
|
| Mon, 05 Aug 2019 10:51:33 +0200 |
Vidar Stiernström |
closing branch. Changes merged to feature/rv
feature/advectionRV
|
| Fri, 18 Jan 2019 09:23:13 +0100 |
Vidar Stiernström |
Branch obsolete. Integratd into the branch feature/rv
feature/burgers2d
|
| Fri, 18 Jan 2019 09:24:29 +0100 |
Vidar Stiernström |
Closing branch. Branch integrated into feature/rv
feature/burgers1d
|
| Mon, 05 Aug 2019 10:49:21 +0200 |
Vidar Stiernström |
Closing branch
rv-interpolation
|
| Fri, 21 Jun 2019 17:28:33 +0200 |
Martin Almquist |
Multiply by 2 in VirtaMin so that scheme is actually provably stable.
feature/laplace_curvilinear_test
|
| Fri, 21 Jun 2019 17:28:02 +0200 |
Martin Almquist |
Update borrowing constants so that M constants are from Virta2014 and R constants are for bp=2,4,7.
feature/laplace_curvilinear_test
|
| Fri, 21 Jun 2019 16:27:49 +0200 |
Martin Almquist |
Implement minimum check in new scheme.
feature/laplace_curvilinear_test
|
| Mon, 10 Jun 2019 14:39:14 +0200 |
Martin Almquist |
Bugfixes in VirtaMin.interfaceStandard()
feature/laplace_curvilinear_test
|
| Mon, 10 Jun 2019 13:27:29 +0200 |
Martin Almquist |
Fix minimum and correct borrowing in VirtaMin scheme.
feature/laplace_curvilinear_test
|
| Mon, 10 Jun 2019 10:43:12 +0200 |
Martin Almquist |
Add LaplaceCurvilinear schemes where the minimum check will be implemented. The Virta scheme will be used for comparison only.
feature/laplace_curvilinear_test
|
| Thu, 30 May 2019 12:07:40 -0700 |
Martin Almquist |
Add multiblock.Grid.expandFunc()
feature/laplace_curvilinear_test
|
| Mon, 27 May 2019 16:53:32 -0700 |
Martin Almquist |
Make LaplaceCurvilinear work for coeff a and b that are scalar, grid functions, or function handles.
feature/laplace_curvilinear_test
|
| Mon, 27 May 2019 16:52:28 -0700 |
Martin Almquist |
Generalize multiblock.evalOn() to work for a mix of function handles and grid functions
feature/laplace_curvilinear_test
|
| Mon, 27 May 2019 16:34:38 -0700 |
Martin Almquist |
Improve Rectangle.show()
feature/laplace_curvilinear_test
|
| Wed, 22 May 2019 15:31:26 -0700 |
Martin Almquist |
Add 2d tests for derivative of delta function, and confirm that they work.
feature/laplace_curvilinear_test
|
| Tue, 21 May 2019 18:44:01 -0700 |
Martin Almquist |
Add derivative of delta functions and corresponding tests, tested for 1D.
feature/laplace_curvilinear_test
|
| Tue, 21 May 2019 18:10:06 -0700 |
Martin Almquist |
Refactor diracDiscr.m by moving the helper function diracDiscr1D to a separate file.
feature/laplace_curvilinear_test
|
| Tue, 21 May 2019 17:59:30 -0700 |
Martin Almquist |
Copy diracDiscr.m from feature/poroelastic
feature/laplace_curvilinear_test
|
| Wed, 15 May 2019 16:55:02 -0700 |
Martin Almquist |
In LaplaceCurvilinear, use grid spacings from 1d opSets instead of using grid.scaling()
feature/laplace_curvilinear_test
|
| Mon, 13 May 2019 10:18:55 -0700 |
Martin Almquist |
Copy-paste improved Curve class from feature/laplace_curvilinear_test
feature/poroelastic
|
| Sat, 11 May 2019 19:19:09 -0700 |
Martin Almquist |
Copy dataSpline() from feature/laplace_curvilinear_test
feature/poroelastic
|
| Sat, 11 May 2019 17:52:08 -0700 |
Martin Almquist |
Divergence and Gradient do not work for multi-block. Not sure how to fix, left error message for now.
feature/poroelastic
|
| Sat, 11 May 2019 16:36:33 -0700 |
Martin Almquist |
Merge heads
feature/poroelastic
|
| Fri, 10 May 2019 15:26:47 -0700 |
Martin Almquist |
Bugfix Elastic2dCurve
feature/poroelastic
|
| Sat, 11 May 2019 15:11:04 -0700 |
Martin Almquist |
Add diffOp for gradient
feature/poroelastic
|
| Tue, 07 May 2019 11:41:15 -0700 |
Martin Almquist |
In RungeKuttaDiscreteData, make K and U non-sparse to improve performance by roughly a factor of 3.
feature/poroelastic
|
| Mon, 06 May 2019 21:23:21 -0700 |
Martin Almquist |
Add diffOp (currently scheme) for Divergence, not sure if this belongs in +scheme.
feature/poroelastic
|
| Sun, 05 May 2019 19:05:31 -0700 |
Martin Almquist |
Introduce optFlag so that one can choose not to build the optimization-related cell of matrices called B. It is too computationally costly and should probably be done in a different way.
feature/poroelastic
|
| Sat, 04 May 2019 14:44:34 -0700 |
Martin Almquist |
Fix bug in LaplCurveNewCorner that makes bc matrix non-sparse.
feature/poroelastic
|
| Thu, 02 May 2019 13:25:14 -0700 |
Martin Almquist |
Bugfix minus sign in Laplace1d Dirichlet penalty.
|
| Mon, 29 Apr 2019 12:55:51 -0700 |
Martin Almquist |
Temporary ugly fix for reversing direction of boundary in interface coupling
feature/laplace_curvilinear_test
|
| Wed, 10 Apr 2019 23:10:13 +0200 |
Jonatan Werpers |
Add tests for time.Rungekutta4 and time.Rungekutta4SecondOrder
feature/timesteppers
|
| Wed, 10 Apr 2019 22:40:55 +0200 |
Jonatan Werpers |
Change name of property k to dt in time.Timestepper
feature/timesteppers
|
| Wed, 10 Apr 2019 22:22:46 +0200 |
Jonatan Werpers |
Merge with default
feature/timesteppers
|
| Wed, 10 Apr 2019 22:21:13 +0200 |
Jonatan Werpers |
Clean up time.rk.get_rk4_time_step()
feature/timesteppers
|
| Wed, 10 Apr 2019 13:27:50 -0700 |
Martin Almquist |
Bugfix in interfaceNonconforming(). Remove unused properties gamm_u, gamm_v.
feature/laplace_curvilinear_test
|
| Wed, 10 Apr 2019 11:28:23 -0700 |
Martin Almquist |
Remove unused borrowing parameter gamma in interfaceStandard
feature/laplace_curvilinear_test
|
| Wed, 10 Apr 2019 11:00:27 -0700 |
Martin Almquist |
Merge with default
feature/laplace_curvilinear_test
|
| Wed, 10 Apr 2019 22:11:11 +0200 |
Jonatan Werpers |
Add parameter in runtestsAll() and runtestsPackage() so that they include tests in subpackages
|
| Tue, 09 Apr 2019 20:24:21 +0000 |
Martin Almquist |
Merged in feature/dataspline (pull request #14)
|
| Tue, 09 Apr 2019 20:24:21 +0000 |
Martin Almquist |
Close branch feature/dataspline
feature/dataspline
|
| Tue, 09 Apr 2019 22:22:03 +0200 |
Jonatan Werpers |
Remove some obsolete comments
feature/timesteppers
|
| Tue, 09 Apr 2019 13:19:55 -0700 |
Martin Almquist |
In Curve.arcLengthParametrization(), upgrade linear interpolation to monotonicity-preserving cubic splines.
feature/dataspline
|
| Tue, 09 Apr 2019 22:17:07 +0200 |
Jonatan Werpers |
Add skeleton for time.rk.ExplicitSecondOrder
feature/timesteppers
|
| Tue, 09 Apr 2019 22:04:51 +0200 |
Jonatan Werpers |
Add functions for evaluating a functions for each timestep.
feature/timesteppers
|
| Tue, 09 Apr 2019 21:48:30 +0200 |
Jonatan Werpers |
Merge with default
feature/timesteppers
|
| Wed, 23 Jan 2019 10:02:13 +0100 |
Jonatan Werpers |
Remove unused properties from rk.Explicit
feature/timesteppers
|
| Tue, 09 Apr 2019 09:50:44 -0700 |
Martin Almquist |
Bugfix Curve.arcLengthParametrization() by using linear interpolation instead of higher-order spline for parameter as a funciton of arclength. Generalize dataSpline() to curves in higher dimensions.
feature/dataspline
|
| Mon, 08 Apr 2019 22:30:47 +0200 |
Jonatan Werpers |
Merge in default
feature/dataspline
|
| Mon, 08 Apr 2019 20:15:37 +0000 |
Jonatan Werpers |
Merged in feature/laplace1dUpdate (pull request #13)
|
| Mon, 08 Apr 2019 20:15:37 +0000 |
Jonatan Werpers |
Close branch feature/laplace1dUpdate
feature/laplace1dUpdate
|
| Fri, 05 Apr 2019 13:33:25 -0700 |
Martin Almquist |
Revert changes in Curve so that spline() is not a static method.
feature/dataspline
|
| Fri, 05 Apr 2019 13:15:45 -0700 |
Martin Almquist |
Remove some comments in dataSpline()
feature/dataspline
|
| Fri, 05 Apr 2019 13:14:29 -0700 |
Martin Almquist |
Bugfix in dataSpline(), reparameterize with parameter from 0 to 1 before using Curve.
feature/dataspline
|
| Fri, 05 Apr 2019 10:17:04 +0200 |
Jonatan Werpers |
Rewrite dataSpline() avoiding the spline function in Curve and using fnder for the differentiation
feature/dataspline
|
| Fri, 05 Apr 2019 09:06:03 +0200 |
Jonatan Werpers |
Remove some spurious empty lines
feature/dataspline
|
| Thu, 04 Apr 2019 17:57:24 -0700 |
Martin Almquist |
Add function parametrization/dataSpline which accepts data points and returns a Curve object consisting of a spline interpolant with the arclength parametrization.
feature/dataspline
|
| Thu, 04 Apr 2019 17:55:57 -0700 |
Martin Almquist |
Turn the helper function spline into a static method in the Curve class.
feature/dataspline
|
| Fri, 29 Mar 2019 14:50:50 -0700 |
Martin Almquist |
Improve comments in LaplCurve.
feature/laplace_curvilinear_test
|
| Fri, 29 Mar 2019 14:41:36 -0700 |
Martin Almquist |
Make LaplaceCurvilinearNew the default version and remove the others
feature/laplace_curvilinear_test
|
| Fri, 29 Mar 2019 14:24:39 -0700 |
Martin Almquist |
Clean up Dirichlet BC code in LaplaceCurvilinearNew.
feature/laplace_curvilinear_test
|
| Wed, 27 Mar 2019 15:56:42 -0700 |
Martin Almquist |
Fix bug in new implementations that made matrices non-sparse.
feature/laplace_curvilinear_test
|
| Tue, 05 Mar 2019 12:41:50 -0800 |
Martin Almquist |
Divide interface penalty strength by 4, to make it sharp. Stability verified by eigenvalue computations.
feature/laplace1dUpdate
|
| Tue, 05 Mar 2019 11:26:42 -0800 |
Martin Almquist |
Add d and n as acceptable boundary condition identifiers, which is consistent with eg LaplaceCurvilinear.
feature/laplace1dUpdate
|
| Tue, 05 Mar 2019 11:18:44 -0800 |
Martin Almquist |
Bugfix in interface SATs, Staggered1DAcousticsVariable
feature/d1_staggered
|
| Sun, 03 Mar 2019 15:00:42 -0800 |
Martin Almquist |
Add H_1D to LaplaceCurvilinearNewCorner
feature/poroelastic
|
| Wed, 20 Feb 2019 16:14:15 -0800 |
Martin Almquist |
Bugfix missing semi-colon in Laplace1d.
|
| Wed, 20 Feb 2019 12:32:49 -0800 |
Martin Almquist |
Bugfix in multiblock.domain.Line method getGrid.
|
| Wed, 13 Feb 2019 20:56:24 +0100 |
Jonatan Werpers |
Add function show() that mimics julias @show
|
| Wed, 13 Feb 2019 20:52:14 +0100 |
Jonatan Werpers |
Merge in feature/grids/LaplaceSquared
|
| Wed, 13 Feb 2019 20:51:56 +0100 |
Jonatan Werpers |
Close branch before merge
feature/grids/LaplaceSquared
|
| Wed, 13 Feb 2019 20:49:39 +0100 |
Jonatan Werpers |
Formatting fix
feature/grids/LaplaceSquared
|
| Wed, 13 Feb 2019 10:24:06 +0100 |
Jonatan Werpers |
Fix bug in d3 boundary condition
feature/grids/LaplaceSquared
|
| Tue, 12 Feb 2019 17:12:42 +0100 |
Jonatan Werpers |
Merge with default
feature/grids/LaplaceSquared
|
| Thu, 20 Sep 2018 12:05:20 +0200 |
Jonatan Werpers |
Merge with default
feature/grids/LaplaceSquared
|
| Tue, 24 Jul 2018 21:08:08 -0700 |
Jonatan Werpers |
Start work on LaplaceSquared. FULL OF ERRORS?!
feature/grids/LaplaceSquared
|
| Wed, 23 Jan 2019 17:11:48 -0800 |
Martin Almquist |
Copy-paste updates from LaplCurvNewCorner to LaplCurvNew, and then modify the corner part.
feature/laplace_curvilinear_test
|
| Tue, 22 Jan 2019 19:18:24 -0800 |
Martin Almquist |
Add variable b. Tested for interface and Dirichlet, but not Neumann yet.
feature/laplace_curvilinear_test
|
| Tue, 22 Jan 2019 18:17:01 -0800 |
Martin Almquist |
Implement new penalty strength for interface. Bugfix missing coeff a in Dirichlet penalty.
feature/laplace_curvilinear_test
|
| Tue, 22 Jan 2019 12:53:13 -0800 |
Martin Almquist |
Clean up getBoundarOperator/Quadrature as was done on feature/getBoundaryOp. Temporarily re-add lambda so that old interface method works.
feature/laplace_curvilinear_test
|
| Thu, 17 Jan 2019 18:57:54 -0800 |
Martin Almquist |
Add scheme where only corner points are multiplied by dim. Does not seem to decrease spectral radius much, but is stable.
feature/laplace_curvilinear_test
|
| Thu, 17 Jan 2019 18:18:00 -0800 |
Martin Almquist |
Set tuning to 1.0 in both old and new Dirichlet.
feature/laplace_curvilinear_test
|
| Tue, 15 Jan 2019 15:08:29 -0800 |
Martin Almquist |
Add LaplaceCurvilinearNew and implement Dirichlet BC using new borrowing.
feature/laplace_curvilinear_test
|
| Mon, 14 Jan 2019 18:14:44 -0800 |
Martin Almquist |
Merge with feature/getBoundaryOp
feature/laplace_curvilinear_test
|
| Thu, 07 Feb 2019 18:42:50 -0800 |
Martin Almquist |
Add multiblock domain Line
|
| Sat, 26 Jan 2019 16:56:35 -0800 |
Martin Almquist |
Elastic2dVariable: Clean up alpha in getBoundaryOperator. Add alpha1 and alpha2 as boundary operators.
feature/poroelastic
|
| Sat, 26 Jan 2019 15:38:58 -0800 |
Martin Almquist |
Massive boundary operator cleanup in Elastic2dVariable
feature/poroelastic
|
| Fri, 25 Jan 2019 16:35:53 -0800 |
Martin Almquist |
Remove superfluous method get_boundary_number in Elastic2dVariable
feature/poroelastic
|
| Fri, 25 Jan 2019 15:52:21 -0800 |
Martin Almquist |
In Elastic2dVariable: copy-paste from feature/getBoundaryOp and fix bugs introduced there.
feature/poroelastic
|
| Fri, 25 Jan 2019 15:15:44 -0800 |
Martin Almquist |
Elastic2dVariable: boundary condition type can now be a string, normal or tangential, as well as component number.
feature/poroelastic
|
| Fri, 25 Jan 2019 14:04:23 -0800 |
Martin Almquist |
Copy-paste LaplCurviNewCorner from laplace branch.
feature/poroelastic
|
| Thu, 24 Jan 2019 08:29:50 +0000 |
Jonatan Werpers |
Merged in feature/getBoundaryOp (pull request #12)
|
| Thu, 24 Jan 2019 08:29:50 +0000 |
Jonatan Werpers |
Close branch feature/getBoundaryOp
feature/getBoundaryOp
|
| Wed, 23 Jan 2019 16:57:50 -0800 |
Martin Almquist |
Elastic2dCurv: Rename get_boundary_op and add getBoundaryQuadrature
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 12:50:06 -0800 |
Martin Almquist |
Bugfix: add missing brackets in getBoundaryQuadrature in LaplCurv and Utux2d
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 11:27:30 -0800 |
Martin Almquist |
Fix mistakes in adbb80e60b10
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 11:17:28 -0800 |
Martin Almquist |
Add getBoundaryQuadrature to all 1d diffOps
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 11:12:23 -0800 |
Martin Almquist |
Clean up Elastic2dVariable (partially), Utux, and Utux2d.
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 17:42:58 +0100 |
Jonatan Werpers |
Fix some mistakes from dc1bcbef2a86
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 17:37:07 +0100 |
Jonatan Werpers |
Clean up getBoundaryOps for a few schemes
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 17:12:22 +0100 |
Jonatan Werpers |
Remove ability to get several boundary ops at the same time from a few of the schemes
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 16:50:50 +0100 |
Jonatan Werpers |
Merge with default
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 16:50:05 +0100 |
Jonatan Werpers |
Remove static method `interface_coupling` that shouldn't have existed in the first place
|
| Tue, 22 Jan 2019 16:47:34 +0100 |
Jonatan Werpers |
Add asserts to boundary identifier inputs
feature/getBoundaryOp
|
| Tue, 22 Jan 2019 10:46:29 +0100 |
Jonatan Werpers |
Fix penalty bug in Beam
|
| Fri, 18 Jan 2019 09:10:45 +0100 |
Vidar Stiernström |
Created a new branch for gathering rv-specific features, since the specific branches are getting nested anyways.
feature/rv
|
| Fri, 18 Jan 2019 09:06:20 +0100 |
Vidar Stiernström |
Allow for the residual normalization function to return a vector. Also change the default normalization from normalizing on norm(u-mean(u),inf) to norm(u/2), since this proved to be better for 1d burgers
feature/burgers1d
|
| Fri, 18 Jan 2019 09:04:38 +0100 |
Vidar Stiernström |
Use opSets in Burgers1d.
feature/burgers1d
|
| Fri, 18 Jan 2019 09:02:02 +0100 |
Vidar Stiernström |
Pass scheme specific parameters as cell array. This will enabale constructDiffOps to be more general. In addition, allow for schemes returning function handles as diffOps, which is currently how non-linear schemes such as Burgers1d are implemented.
feature/burgers1d
|
| Fri, 18 Jan 2019 08:58:26 +0100 |
Vidar Stiernström |
Change argument order to the "correct" order, i.e providing diffOp specific parameters before the opSet.
feature/burgers1d
|
| Thu, 17 Jan 2019 11:06:13 +0100 |
Vidar Stiernström |
Forgot to add .m as file extension
feature/burgers1d
|
| Thu, 17 Jan 2019 11:03:22 +0100 |
Vidar Stiernström |
Rename Burgers1D to Burgers1d
feature/burgers1d
|
| Thu, 17 Jan 2019 10:44:12 +0100 |
Vidar Stiernström |
Merge with branch feature/advectioRV to utilize the +rv package
feature/burgers1d
|
| Thu, 17 Jan 2019 10:42:14 +0100 |
Vidar Stiernström |
Created a new branch for attempting to improve rv, via interpolation
rv-interpolation
|
| Thu, 17 Jan 2019 10:25:06 +0100 |
Vidar Stiernström |
For easier comparison, return both the first order and residual viscosity when evaluating the residual. Add the first order and residual viscosity to the state of the RungekuttaRV time steppers
feature/advectionRV
|
| Fri, 11 Jan 2019 15:52:48 +0100 |
Vidar Stiernström |
Rename Rungekutta-Rv classes according to naming convention
feature/advectionRV
|
| Fri, 11 Jan 2019 15:47:10 +0100 |
Vidar Stiernström |
Create a separate class of RungekuttaExteriorRV which uses BDFs for computing the time derivative. Remove BDFs from RungekuttaExteriorRV
feature/advectionRV
|
| Mon, 07 Jan 2019 16:41:21 +0100 |
Vidar Stiernström |
Remove obsolete AdvectionRV1D scheme
feature/advectionRV
|
| Mon, 07 Jan 2019 16:35:04 +0100 |
Vidar Stiernström |
Support variable wave speed and upwind operators in Utux
feature/advectionRV
|
| Mon, 07 Jan 2019 16:32:40 +0100 |
Vidar Stiernström |
Fix minor issues in rv/constructDiffOps
feature/advectionRV
|
| Mon, 07 Jan 2019 16:26:05 +0100 |
Vidar Stiernström |
Clean up of Utux2d
feature/advectionRV
|
| Mon, 07 Jan 2019 13:12:10 +0100 |
Vidar Stiernström |
Remove obsolete scheme AdvectionRV2d
feature/advectionRV
|
| Mon, 07 Jan 2019 12:06:49 +0100 |
Vidar Stiernström |
Remove incorrect assertion of the number of BC:s
feature/advectionRV
|
| Mon, 07 Jan 2019 12:06:06 +0100 |
Vidar Stiernström |
Add dirichlet bc for north and south boundary and handle cases where the wave speed changes in sign.
feature/advectionRV
|
| Wed, 19 Dec 2018 20:00:27 +0100 |
Vidar Stiernström |
Add upwind dissipation to the operator inside Utux2d
feature/advectionRV
|
| Fri, 14 Dec 2018 18:33:10 +0100 |
Vidar Stiernström |
Add utility for constructing the operators used by a discretization emplying RV-stabilization
feature/advectionRV
|
| Fri, 14 Dec 2018 18:30:27 +0100 |
Vidar Stiernström |
Support upwind opSet in Utux2d
feature/advectionRV
|
| Tue, 11 Dec 2018 17:31:28 +0100 |
Vidar Stiernström |
Merge with default for latest changes
feature/advectionRV
|
| Tue, 11 Dec 2018 16:29:21 +0100 |
Vidar Stiernström |
Add support for using the ODE to approximate the time derivative in the residual
feature/advectionRV
|
| Fri, 07 Dec 2018 13:11:53 +0100 |
Vidar Stiernström |
Add lower level for boot-strapping to RungeKuttaExteriorRV
feature/advectionRV
|
| Thu, 06 Dec 2018 17:03:22 +0100 |
Vidar Stiernström |
Debug ResidualViscosity
feature/advectionRV
|
| Thu, 06 Dec 2018 11:30:47 +0100 |
Vidar Stiernström |
Add boot-strapping to RungeKuttaExteriorRV
feature/advectionRV
|
| Wed, 05 Dec 2018 15:04:44 +0100 |
Vidar Stiernström |
Draft implementation of RungeKutta with exterior RV updates
feature/advectionRV
|
| Wed, 05 Dec 2018 13:44:10 +0100 |
Vidar Stiernström |
Create residual viscosity package +rv and generalize the ResidualViscosity class
feature/advectionRV
|
| Thu, 15 Nov 2018 13:49:11 -0800 |
Vidar Stiernström |
Add todo:s for time stepping with RV
feature/advectionRV
|
| Wed, 07 Nov 2018 10:03:35 -0800 |
Vidar Stiernström |
Add 1D scheme for advection with RV
feature/advectionRV
|
| Wed, 31 Oct 2018 09:31:34 -0700 |
Vidar Stiernström |
Draft implementation of scheme for advection with RV
feature/advectionRV
|
| Fri, 12 Oct 2018 08:54:39 +0200 |
Vidar Stiernström |
First attempt at implementing Burgers in 2D with RV-stabilization
feature/burgers2d
|
| Wed, 16 Jan 2019 11:31:04 -0800 |
Martin Almquist |
Revert to old code in multiblock.DiffOp.getBoundaryOperator.
feature/getBoundaryOp
|
| Wed, 16 Jan 2019 16:50:47 +0100 |
Jonatan Werpers |
Merge with default
feature/getBoundaryOp
|
| Wed, 16 Jan 2019 16:50:21 +0100 |
Jonatan Werpers |
Remove misplaced error functions from +scheme
|
| Wed, 16 Jan 2019 16:45:26 +0100 |
Jonatan Werpers |
Delete scheme.Wave2dCurve
feature/getBoundaryOp
|
| Wed, 16 Jan 2019 16:39:47 +0100 |
Jonatan Werpers |
Merge with default to remove scheme.Beam2d
feature/getBoundaryOp
|
| Wed, 16 Jan 2019 16:37:59 +0100 |
Jonatan Werpers |
Remove scheme.Beam2d.m
|
| Wed, 16 Jan 2019 16:35:01 +0100 |
Jonatan Werpers |
Add getBoundaryOperator and getBoundaryQuadrature as abstract methods in scheme.Scheme
feature/getBoundaryOp
|
| Mon, 14 Jan 2019 11:12:42 -0800 |
Martin Almquist |
Merge with default
feature/getBoundaryOp
|
| Sat, 12 Jan 2019 13:44:08 -0800 |
Martin Almquist |
Fix overlooked Schrodinger1d scheme.
feature/getBoundaryOp
|
| Sat, 12 Jan 2019 13:35:19 -0800 |
Martin Almquist |
Add getBoundaryOperator to all 1d schemes. Did not add getBoundaryQuadrature because it doesnt make sense in 1d (?)
feature/getBoundaryOp
|
| Sat, 12 Jan 2019 11:57:50 -0800 |
Martin Almquist |
Add getBoundaryOperator method to all 2d schemes, except obsolete Wave2dCurve and ElastiCurve, which needs a big makeover.
feature/getBoundaryOp
|
| Wed, 09 Jan 2019 23:01:17 +0100 |
Jonatan Werpers |
Rename time.rk.General to time.rk.Explicit and fix some errors
feature/timesteppers
|
| Wed, 09 Jan 2019 22:57:13 +0100 |
Jonatan Werpers |
Full use of butcher tableau in time.rk.General. Inline rungekutta step methods
feature/timesteppers
|
| Wed, 09 Jan 2019 12:14:30 +0100 |
Jonatan Werpers |
Implement method to get gain from butcher tableu
feature/timesteppers
|
| Wed, 09 Jan 2019 11:14:16 +0100 |
Jonatan Werpers |
Make time.rk.General accept a butcher tableau instead of a string to choose method. String variant implemented as a static method
feature/timesteppers
|
| Wed, 09 Jan 2019 10:59:38 +0100 |
Jonatan Werpers |
Move time.Rungekutta to time.rk.General
feature/timesteppers
|
| Wed, 09 Jan 2019 10:17:00 +0100 |
Jonatan Werpers |
Make Rungekutta4SecondOrder native second order
feature/timesteppers
|
| Wed, 09 Jan 2019 09:09:15 +0100 |
Jonatan Werpers |
Create class for butcher tableau
feature/timesteppers
|
| Wed, 09 Jan 2019 08:56:42 +0100 |
Jonatan Werpers |
Merge with default
feature/timesteppers
|
| Tue, 08 Jan 2019 15:00:12 +0100 |
Jonatan Werpers |
Fix bug in assertSize where dimensions didn't have to match
|
| Tue, 08 Jan 2019 14:59:43 +0100 |
Jonatan Werpers |
Add assertLength
|
| Tue, 08 Jan 2019 13:28:41 +0100 |
Jonatan Werpers |
Rename butcherTableau() to butcherTableauFromStr() in preparation of butcher tableau class
feature/timesteppers
|
| Tue, 08 Jan 2019 12:34:29 +0100 |
Jonatan Werpers |
Convert Rungekutta4SecondOrder to take F(t,v,v_t) instead of matrices
feature/timesteppers
|
| Tue, 08 Jan 2019 12:19:33 +0100 |
Jonatan Werpers |
Inline the rk.rungekutta_4 function.
feature/timesteppers
|
| Tue, 08 Jan 2019 12:07:57 +0100 |
Jonatan Werpers |
Convert Rungekutta4 to take F(t,y) instead of a matrix
feature/timesteppers
|
| Tue, 08 Jan 2019 11:51:24 +0100 |
Martin Almquist |
Add the following methods in LaplaceCurvilinear: getBoundaryOperator, getBoundaryQuadrature, getBoundaryBorrowing. Remove get_boundary_ops. Make interface and boundary_condition methods use the new methods.
feature/getBoundaryOp
|
| Mon, 07 Jan 2019 17:10:06 +0100 |
Martin Almquist |
Update scheme.Elastic2dVariable by copy-pasting from feature/poroelastic. This is compatible with new getBoundaryOperator in multiblock.DiffOp.
feature/getBoundaryOp
|
| Mon, 07 Jan 2019 17:07:35 +0100 |
Martin Almquist |
Make mutliblock.DiffOp.getBoundaryOperator/Quadrature use scheme methods instead of properties.
feature/getBoundaryOp
|
| Mon, 07 Jan 2019 16:26:00 +0100 |
Jonatan Werpers |
Merge with default
feature/timesteppers
|
| Mon, 07 Jan 2019 16:15:49 +0100 |
Jonatan Werpers |
Refactor CdiffImplicit to take input arguments in the right order
|
| Mon, 07 Jan 2019 15:56:35 +0100 |
Jonatan Werpers |
Refactor time.Cdiff and add getEnergyMethod
|
| Mon, 07 Jan 2019 15:01:26 +0100 |
Jonatan Werpers |
Add getEnergy methods to CdiffImplicit
|
| Thu, 03 Jan 2019 13:24:39 +0100 |
Martin Almquist |
Stupid merge makes this branch dangerous. Merging with other branches will result in unexpected changes. Never merge this branch with anything. Closing branch.
feature/getBoundaryOperator
|
| Tue, 25 Dec 2018 16:39:06 +0100 |
Martin Almquist |
Extract tuning from alpha.
feature/poroelastic
|
| Tue, 25 Dec 2018 16:26:20 +0100 |
Martin Almquist |
Remove unused properties in Elastic2dVariable
feature/poroelastic
|
| Tue, 25 Dec 2018 08:33:35 +0100 |
Martin Almquist |
Clean up Elastic2dVariable.interfaceStandard
feature/poroelastic
|
| Tue, 25 Dec 2018 07:50:07 +0100 |
Martin Almquist |
Merge with feature/poroelastic. Use only the changes made to multiblock.DiffOp and scheme.Elastic2dVariable. DiffOp.getBoundaryOperator/Quadrature now use scheme methods instead of propeties.
feature/getBoundaryOperator
|
| Tue, 25 Dec 2018 07:23:38 +0100 |
Martin Almquist |
Add getBoundaryQuadrature in Elastic2dVariable. Rename get_boundary_operator -> getBoundaryOperator. Add operators in getBoundaryOperator, with full size so that they work with multiblock.DiffOp.getBoundaryOperator.
feature/poroelastic
|
| Tue, 25 Dec 2018 07:21:19 +0100 |
Martin Almquist |
Remove silly getBoundaryOperator* methods in multiblock.DiffOp and make the getBoundaryOperator and getBoundaryQuadrature methods use the scheme.getBoundaryOperator/Quadrature methods instead of properties.
feature/poroelastic
|
| Sun, 23 Dec 2018 14:39:31 +0100 |
Martin Almquist |
Merge with default.
feature/poroelastic
|
| Sun, 23 Dec 2018 14:06:26 +0100 |
Martin Almquist |
Fix bug in Elastic2dVariable that resulted in using tuning^2
feature/poroelastic
|
| Sat, 22 Dec 2018 18:08:51 +0100 |
Martin Almquist |
Fix bug in Elastic2dVariable that caused crash for m_x neq m_y
feature/poroelastic
|
| Sat, 22 Dec 2018 16:41:17 +0100 |
Martin Almquist |
Remove use of tensor library in B assembly
feature/poroelastic
|
| Wed, 19 Dec 2018 07:09:24 +0100 |
Martin Almquist |
Fix warning in getBoundaryWrapper methods
feature/poroelastic
|
| Wed, 19 Dec 2018 06:58:10 +0100 |
Martin Almquist |
Turn alpha into a boundary operator. Add properties H_w etc for getBoundaryQuadrature to work.
feature/poroelastic
|
| Wed, 19 Dec 2018 06:54:47 +0100 |
Martin Almquist |
Bugfix in multiblock.DiffOp/getBoundaryOperatorWrapper
feature/poroelastic
|
| Mon, 17 Dec 2018 21:07:59 -0800 |
Martin Almquist |
Make ElasticVariable2d.boundary_condition use get_boundary_operator for penalty strength.
feature/poroelastic
|
| Mon, 17 Dec 2018 20:06:50 -0800 |
Martin Almquist |
Add type to Elastic2dVariable.interface
feature/poroelastic
|
| Wed, 05 Dec 2018 19:30:09 -0800 |
Martin Almquist |
Bugfix in Elastic2dVariable.getBoundaryOps, alpha. Adjoint FD conv works now!
feature/poroelastic
|
| Wed, 05 Dec 2018 18:58:10 -0800 |
Martin Almquist |
Temporary changes in multiblock.DiffOp. Change traction operators in Elastic2dvariable to be true boundary operators. But adjoint FD conv test fails for dirichlet BC so need to debug!
feature/poroelastic
|
| Wed, 12 Dec 2018 23:16:44 +0100 |
Jonatan Werpers |
Add function for drawing arrow on plot
|
| Tue, 11 Dec 2018 11:21:25 +0100 |
Jonatan Werpers |
Add todo in CdiffImplicit
|
| Mon, 10 Dec 2018 08:29:41 +0000 |
Jonatan Werpers |
Merged in feature/utux2D (pull request #11)
|
| Mon, 10 Dec 2018 08:29:41 +0000 |
Jonatan Werpers |
Close branch feature/utux2D
feature/utux2D
|
| Mon, 10 Dec 2018 09:28:40 +0100 |
Jonatan Werpers |
Merge default into feature/utux2D
feature/utux2D
|
| Fri, 07 Dec 2018 11:10:31 -0800 |
Martin Almquist |
Improve comments in InterpOpsXX
feature/utux2D
|
| Fri, 07 Dec 2018 16:10:58 +0100 |
Jonatan Werpers |
Better errors in Map()
|
| Thu, 06 Dec 2018 10:32:02 +0100 |
Jonatan Werpers |
Rename *2D schemes to *2d
feature/utux2D
|
| Wed, 05 Dec 2018 15:27:44 -0800 |
Martin Almquist |
Remove half-commented switch in Utux.
feature/utux2D
|
| Wed, 05 Dec 2018 16:08:48 +0100 |
Jonatan Werpers |
Use assertType(...) instead of assert(isa(...))
feature/utux2D
|
| Wed, 05 Dec 2018 16:02:45 +0100 |
Jonatan Werpers |
Add missing newline at end of file
feature/utux2D
|
| Wed, 05 Dec 2018 15:57:41 +0100 |
Jonatan Werpers |
Raname opts to type in a bunch of interface methods
feature/utux2D
|
| Wed, 05 Dec 2018 10:55:50 +0100 |
Jonatan Werpers |
Update abstract scheme class
feature/utux2D
|
| Wed, 05 Dec 2018 10:52:37 +0100 |
Jonatan Werpers |
Change from opts to type in a few schemes
feature/utux2D
|
| Tue, 04 Dec 2018 15:24:36 -0800 |
Martin Almquist |
Merge with default
feature/utux2D
|
| Tue, 04 Dec 2018 14:54:28 -0800 |
Martin Almquist |
Make Utux2D work with new interface type etc.
feature/utux2D
|
| Tue, 04 Dec 2018 14:51:23 -0800 |
Martin Almquist |
Remove empty line in Schrodinger2d
feature/utux2D
|
| Tue, 04 Dec 2018 14:42:36 -0800 |
Martin Almquist |
Add forgotten type argument in call to interfaceStandard in Schrodinger2d and LaplCurv.
feature/utux2D
|
| Tue, 04 Dec 2018 14:25:03 -0800 |
Martin Almquist |
Update Schrodinger2d to work with new interface types, similar to LaplCurv.
feature/utux2D
|
| Tue, 04 Dec 2018 14:07:38 -0800 |
Martin Almquist |
Make LaplCurv send only number of grid points to InterpOpsXX. Remove coordinates from get_boundary_ops method.
feature/utux2D
|
| Tue, 04 Dec 2018 14:06:42 -0800 |
Martin Almquist |
Use only number of grid points as arguments in InterpOpsXX, instead of coordinates.
feature/utux2D
|
| Tue, 04 Dec 2018 12:54:33 +0100 |
Jonatan Werpers |
Remove default values from LaplaceCurvilinear.interfaceStandard
feature/utux2D
|
| Tue, 04 Dec 2018 12:53:59 +0100 |
Jonatan Werpers |
Fix doc for LaplaceCurvilinear.interface
feature/utux2D
|
| Tue, 04 Dec 2018 12:37:44 +0100 |
Jonatan Werpers |
Change from opts to type in multiblock.setAllInterfaceTypes
feature/utux2D
|
| Mon, 03 Dec 2018 16:49:43 -0800 |
Martin Almquist |
Add methods timePoints and quadWeights to Rungekutta class.
feature/timesteppers
|
| Mon, 03 Dec 2018 16:33:27 -0800 |
Martin Almquist |
Remove unnecessary(?) arguments in Rungekutta.scheme.
feature/timesteppers
|
| Mon, 03 Dec 2018 16:26:44 -0800 |
Martin Almquist |
Make Rungekutta class allow for discrete data.
feature/timesteppers
|
| Mon, 03 Dec 2018 16:26:18 -0800 |
Martin Almquist |
Add stepping function for RK with discrete data.
feature/timesteppers
|
| Mon, 03 Dec 2018 15:40:26 -0800 |
Martin Almquist |
Improve error msg in rk.butcherTableau
feature/timesteppers
|
| Mon, 03 Dec 2018 15:01:24 -0800 |
Martin Almquist |
Replace opts by type everywhere
feature/utux2D
|
| Mon, 03 Dec 2018 14:53:52 -0800 |
Martin Almquist |
Rename AWW OP. Make Interpolation operator classes take grid points as arguments. Remove LaplCurv.interpolationOperators. Introduce default struct in LaplCurv.interface.
feature/utux2D
|
| Mon, 03 Dec 2018 12:02:27 -0800 |
Martin Almquist |
Make multiblock.setAllInterfaceOptions set opts only for those entries where grid.connections indicates interface couplings.
feature/utux2D
|
| Sun, 02 Dec 2018 18:04:33 -0800 |
Martin Almquist |
Bugfixes in LaplaceCurve
feature/utux2D
|
| Sun, 02 Dec 2018 17:25:08 -0800 |
Martin Almquist |
Add helper function multiblock.SetAllInterfaceOptions.
feature/utux2D
|
| Sun, 02 Dec 2018 17:19:48 -0800 |
Martin Almquist |
Remove interfaceOptions class
feature/utux2D
|
| Sun, 02 Dec 2018 17:10:07 -0800 |
Martin Almquist |
Refactor LaplCurv.interfaceNonConf. Add method for interpolation operator generation in LaplCurv
feature/utux2D
|
| Sun, 02 Dec 2018 16:27:49 -0800 |
Martin Almquist |
Add warning that interfaceNonConforming in LaplaceCurve only works for Cartesian grids.
feature/utux2D
|
| Wed, 28 Nov 2018 17:35:19 -0800 |
Martin Almquist |
Merge with default.
feature/d1_staggered
|
| Wed, 28 Nov 2018 14:04:31 -0800 |
Martin Almquist |
Bugfix in Elastic2dVariable.get_boundary_ops
feature/poroelastic
|
| Mon, 26 Nov 2018 16:23:27 -0800 |
Martin Almquist |
Add properties for stage approximations and stage rates in the Rungekutta class.
feature/timesteppers
|
| Mon, 26 Nov 2018 16:12:27 -0800 |
Martin Almquist |
Make time.rk.rungekutta return stage approximations and stage rates in addition to the solution after one time step.
feature/timesteppers
|
| Mon, 26 Nov 2018 16:08:54 -0800 |
Martin Almquist |
Add comment in butcherTableau about rk4-3/8 being irreducible.
feature/timesteppers
|
| Mon, 26 Nov 2018 10:00:05 +0100 |
Jonatan Werpers |
Clean up default_field
feature/utux2D
|
| Sun, 25 Nov 2018 21:09:22 -0800 |
Martin Almquist |
Make default_field overwrite if field exists but is empty. Refactor interface method in Utux2d.
feature/utux2D
|
| Sun, 25 Nov 2018 21:08:55 -0800 |
Martin Almquist |
Bugfix in nonConformingInterfaceOptions
feature/utux2D
|
| Sun, 25 Nov 2018 19:46:39 -0800 |
Martin Almquist |
Refactor interface method for Schrodinger2d
feature/utux2D
|
| Sat, 24 Nov 2018 15:43:34 -0800 |
Martin Almquist |
Improve comments and names. Change InterfaceOptions.union to merge.
feature/utux2D
|
| Fri, 23 Nov 2018 20:39:40 -0800 |
Martin Almquist |
Change the name of the last interface method argument from type to opts in all schemes.
feature/utux2D
|
| Fri, 23 Nov 2018 20:21:28 -0800 |
Martin Almquist |
Bugfix in InterfaceOptions.setOption
feature/utux2D
|
| Fri, 23 Nov 2018 20:14:16 -0800 |
Martin Almquist |
Add helper function nonConformingInterfaceOptions that creates an InterfaceOptions object that specifies which interpolation operators are used where.
feature/utux2D
|
| Fri, 23 Nov 2018 20:12:54 -0800 |
Martin Almquist |
Add new class multiblock.InterfaceOptions whose instances are passed to multiblock.DiffOp.
feature/utux2D
|
| Fri, 23 Nov 2018 20:07:13 -0800 |
Martin Almquist |
Remove property interpolation_type in LaplaceCurvilinear
feature/utux2D
|
| Thu, 22 Nov 2018 22:03:44 -0800 |
Martin Almquist |
Include type as (optional) input parameter in the interface method of all schemes.
feature/utux2D
|
| Thu, 22 Nov 2018 22:03:06 -0800 |
Martin Almquist |
Outline new interface method in LaplaceCurvilinear
feature/utux2D
|
| Thu, 22 Nov 2018 22:01:58 -0800 |
Martin Almquist |
Include interface type in multiblock.DiffOp, passed to all scheme.interface methods.
feature/utux2D
|
| Sat, 24 Nov 2018 14:55:48 +0000 |
Jonatan Werpers |
Merged in bcSetupExperiment (pull request #10)
|
| Sat, 24 Nov 2018 14:55:48 +0000 |
Jonatan Werpers |
Close branch bcSetupExperiment
bcSetupExperiment
|
| Sat, 24 Nov 2018 15:52:47 +0100 |
Jonatan Werpers |
Merge with default
bcSetupExperiment
|
| Sat, 24 Nov 2018 15:48:00 +0100 |
Jonatan Werpers |
Fix the documentation of functions
bcSetupExperiment
|
| Thu, 22 Nov 2018 10:44:11 +0100 |
Jonatan Werpers |
Mordernize Laplace1d
|
| Thu, 22 Nov 2018 10:43:48 +0100 |
Jonatan Werpers |
Fix bug in bcSetup
|
| Thu, 22 Nov 2018 07:58:11 +0100 |
Jonatan Werpers |
Rename and mordernize scheme.Wave to scheme.Laplace1d. Not fully converted
|
| Thu, 22 Nov 2018 07:31:42 +0100 |
Jonatan Werpers |
Merge with default
bcSetupExperiment
|
| Thu, 22 Nov 2018 07:29:30 +0100 |
Jonatan Werpers |
Add new formatting method to TextTable
|
| Thu, 22 Nov 2018 07:27:11 +0100 |
Jonatan Werpers |
Add a stuffStruct(), the reverse of dealStruct()
|
| Thu, 22 Nov 2018 07:26:45 +0100 |
Jonatan Werpers |
Handle default arguments better in dealStruct()
|
| Thu, 22 Nov 2018 07:25:52 +0100 |
Jonatan Werpers |
Add function to get the hgRevision hash as a string
|
| Wed, 21 Nov 2018 18:29:29 -0800 |
Martin Almquist |
Merge with feature/poroelastic.
feature/d1_staggered
|
| Thu, 15 Nov 2018 17:29:30 -0800 |
Vidar Stiernström |
Remove getState from TimeStepper and derived classes
feature/timesteppers
|
| Thu, 15 Nov 2018 17:10:01 -0800 |
Vidar Stiernström |
Add general Runge-Kutta class
feature/timesteppers
|
| Thu, 15 Nov 2018 16:42:58 -0800 |
Vidar Stiernström |
Rename package rk4 to rk
feature/timesteppers
|
| Thu, 15 Nov 2018 16:36:21 -0800 |
Vidar Stiernström |
Merge with default for latest changes
feature/timesteppers
|
| Sun, 04 Nov 2018 12:36:30 -0800 |
Martin Almquist |
Generalize Staggered1DAcoustics to handle variable coefficients defined by both function handles and vectors.
feature/d1_staggered
|
| Fri, 02 Nov 2018 10:47:03 -0700 |
Martin Almquist |
Add a getBoundaryOperator method in multiblock.DiffOp that uses the the diffop get_boundary_operator method rather than its properties. Werpers might not like this.
feature/poroelastic
|
| Fri, 02 Nov 2018 10:44:59 -0700 |
Martin Almquist |
Add Jonatans bugfix to bcSetup.
feature/poroelastic
|
| Fri, 26 Oct 2018 16:35:23 -0700 |
Martin Almquist |
In Elastic2dVariable: Improve notation for borrowing constants. Update interface constant to match corrected derivation. Tests ok.
feature/poroelastic
|
| Fri, 26 Oct 2018 15:41:26 -0700 |
Martin Almquist |
Add method expandFunc to multiblock.Grid
feature/poroelastic
|
| Fri, 02 Nov 2018 11:14:06 +0100 |
Jonatan Werpers |
Merge with default
bcSetupExperiment
|
| Fri, 02 Nov 2018 11:13:51 +0100 |
Jonatan Werpers |
Fix typo in boundary group definition in multiblock.domain.Circle
|
| Fri, 02 Nov 2018 11:11:50 +0100 |
Jonatan Werpers |
Fix bugs in forcingSetup and verifyFormat
bcSetupExperiment
|
| Thu, 01 Nov 2018 16:01:33 +0100 |
Jonatan Werpers |
Clean up bc.forcingSetup
bcSetupExperiment
|
| Thu, 01 Nov 2018 15:36:19 +0100 |
Jonatan Werpers |
Merge with default
bcSetupExperiment
|
| Thu, 01 Nov 2018 14:10:47 +0100 |
Jonatan Werpers |
Add grid for just a collection of nodes
|
| Thu, 01 Nov 2018 14:10:02 +0100 |
Jonatan Werpers |
Add function to deal the fields of a struct to variables
|
| Thu, 01 Nov 2018 12:05:53 +0100 |
Jonatan Werpers |
Clean up closureSetup
bcSetupExperiment
|
| Thu, 01 Nov 2018 12:02:25 +0100 |
Jonatan Werpers |
Clean up verifyFormat
bcSetupExperiment
|
| Thu, 01 Nov 2018 11:41:03 +0100 |
Jonatan Werpers |
Clean up notes
bcSetupExperiment
|
| Thu, 01 Nov 2018 10:41:36 +0100 |
Jonatan Werpers |
Change some naming of functions
bcSetupExperiment
|
| Fri, 07 Sep 2018 09:19:03 +0200 |
Jonatan Werpers |
Start organizing the code
bcSetupExperiment
|
| Fri, 27 Jul 2018 10:39:12 -0700 |
Jonatan Werpers |
Merge with feature/grids
bcSetupExperiment
|
