sbplib: revision graph

graph

less more | rev 1347: (0) tip

Add interface, not fully compatible. feature/poroelastic tip
Tue, 30 Apr 2024 14:58:35 +0200, by Martin Almquist
Refactor computation of borrowing from C. Update to correct number of boundary points for borrowing from R. feature/poroelastic
Tue, 30 Apr 2024 14:18:47 +0200, by Martin Almquist
Add scheme for Elastic2dVariable, not fully compatible. feature/poroelastic
Tue, 30 Apr 2024 13:33:39 +0200, by Martin Almquist
Remove round off zeros from D2Nonequidistant operators feature/D2_boundary_opt
Sat, 15 Oct 2022 15:48:20 +0200, by Vidar Stiernström
Improve on default choice of number of grid points for each block feature/D2_boundary_opt
Fri, 14 Oct 2022 14:42:32 +0200, by Vidar Stiernström
Add support for glue interpolation operators, and separate wave speeds across interfaces feature/D2_boundary_opt
Fri, 26 Aug 2022 14:19:29 +0200, by Vidar Stiernström
Pass logic grid along to diracDiscr feature/D2_boundary_opt
Fri, 22 Jul 2022 16:37:49 +0200, by Vidar Stiernström
Allow passing number of gridlines for each block feature/D2_boundary_opt
Fri, 22 Jul 2022 16:34:50 +0200, by Vidar Stiernström
Fix comment feature/D2_boundary_opt
Fri, 22 Jul 2022 16:31:18 +0200, by Vidar Stiernström
Add support for using periodic grids. feature/D2_boundary_opt
Fri, 13 May 2022 13:29:05 +0200, by Vidar Stiernström
Add periodic D1 and D2 operators for orders 8,10,12 feature/D2_boundary_opt
Fri, 13 May 2022 13:28:10 +0200, by Vidar Stiernström
Add methods for creating grids with different grid point distributions for each coordinate direction, and also supports constructing periodic grids feature/D2_boundary_opt
Fri, 13 May 2022 13:26:16 +0200, by Vidar Stiernström
Calculate width for all orders feature/D2_boundary_opt
Sat, 07 May 2022 10:41:22 +0200, by Vidar Stiernström
Use the logic grid associated with a CurvilinearGrid instead of creating a new one feature/D2_boundary_opt
Sat, 07 May 2022 10:40:47 +0200, by Vidar Stiernström
Add support for RK6 feature/D2_boundary_opt
Sat, 07 May 2022 10:30:59 +0200, by Vidar Stiernström
Clarify comments feature/D2_boundary_opt
Wed, 04 May 2022 08:42:13 +0200, by Vidar Stiernström
Merge with feature/poroelastic for Elastic schemes feature/D2_boundary_opt
Thu, 10 Mar 2022 16:54:26 +0100, by Vidar Stiernström
Add size checks to the operators feature/D2_boundary_opt
Thu, 17 Feb 2022 18:55:11 +0100, by Vidar Stiernström
Add support for boundary optimized grids in DefCurvilinear, and add boundaryOptimizedCurvilinear for constructing a curvilinear grid with boundary optimized grid point placement. feature/D2_boundary_opt
Mon, 14 Feb 2022 14:55:29 +0100, by Vidar Stiernström
Merge with feature/FMMlabb feature/D2_boundary_opt
Mon, 14 Feb 2022 11:14:46 +0100, by Vidar Stiernström
Fix typo in comment feature/D2_boundary_opt
Mon, 14 Feb 2022 10:49:49 +0100, by Vidar Stiernström
Fix bug when using wide stencils feature/D2_boundary_opt
Sun, 13 Feb 2022 20:58:35 +0100, by Vidar Stiernström
Add variable coefficient boundary-optimized second derivatives. feature/D2_boundary_opt
Sun, 13 Feb 2022 19:32:34 +0100, by Vidar Stiernström
Bugifx penalty sign. feature/laplace1d_variable
Sun, 27 Jun 2021 16:19:28 +0200, by Martin Almquist
First implementation of Laplace1dVariable. Passes symmetry and definiteness tests. feature/laplace1d_variable
Sun, 11 Apr 2021 21:10:23 +0200, by Martin Almquist
Add Zt to output args for Elastic2dCurvilinearAnisotropic.interfaceNormalTangential feature/poroelastic
Sat, 24 Oct 2020 20:58:26 -0700, by Martin Almquist
Remove warning about normal-tangential BC, because the BC decouple in normal-tangential coordinates feature/poroelastic
Sat, 01 Aug 2020 17:00:39 -0700, by Martin Almquist
Add some interface forcing penalties in ViscoElastic2d feature/poroelastic
Tue, 28 Jul 2020 21:59:41 -0700, by Martin Almquist
Bugfix interface forcing in ElasticCurveAnisotropic feature/poroelastic
Tue, 28 Jul 2020 21:58:22 -0700, by Martin Almquist
Implement normal-tangential interface treatment in viscoElastic2d feature/poroelastic
Sun, 26 Jul 2020 20:42:06 -0700, by Martin Almquist
Add some interface forcing penalties in ElasticCurvilinearAnisotropic feature/poroelastic
Sun, 26 Jul 2020 20:06:06 -0700, by Martin Almquist
Add interfaceForcing method in multiblock.DiffOp to facilitate mms forcing feature/poroelastic
Sun, 26 Jul 2020 20:05:10 -0700, by Martin Almquist
Add new interface method interfaceNormalTangential in Elastic2dCurvilinearAnisotropic. feature/poroelastic
Sun, 26 Jul 2020 17:38:28 -0700, by Martin Almquist
Add traction operators that include the viscous terms and use them to clean up the imposition of traction BC. feature/poroelastic
Sat, 25 Jul 2020 15:56:31 -0700, by Martin Almquist
Add viscoelastic fault interface feature/poroelastic
Wed, 22 Jul 2020 15:35:25 -0700, by Martin Almquist
Add viscoelastic regular interfaces feature/poroelastic
Tue, 21 Jul 2020 21:07:37 -0700, by Martin Almquist
Move common code for displacement and traction BC outside of switch statement feature/poroelastic
Mon, 20 Jul 2020 22:21:57 -0700, by Martin Almquist
Add viscoelastic displacement BC for normal-tangential. Bugfix traction BC for normal-tangential feature/poroelastic
Mon, 20 Jul 2020 22:06:33 -0700, by Martin Almquist
Add displacement BC to viscoelastic feature/poroelastic
Mon, 20 Jul 2020 17:45:58 -0700, by Martin Almquist
Add viscoElastic traction bc for normal-tangential feature/poroelastic
Sun, 19 Jul 2020 21:24:48 -0700, by Martin Almquist
Add diffOp for viscoElastic feature/poroelastic
Sun, 19 Jul 2020 20:30:16 -0700, by Martin Almquist
Add transformation gradient as property in CurvilinearAnisotropic feature/poroelastic
Sun, 19 Jul 2020 20:29:48 -0700, by Martin Almquist
Clean up hollow D2 generation by using precomputed coefficients stored in mat files feature/poroelastic
Mon, 13 Jul 2020 14:21:41 -0700, by Martin Almquist
Improve performance for the hollow case feature/poroelastic
Sat, 11 Jul 2020 07:25:06 -0700, by Martin Almquist
Make the hollow scheme generation more efficient by introducing the D2VariableHollow opSet feature/poroelastic
Sat, 11 Jul 2020 06:54:15 -0700, by Martin Almquist
Add the hollow option to the anisotropic diffops feature/poroelastic
Fri, 10 Jul 2020 20:24:23 -0700, by Martin Almquist
Fix incorrect package name. default
Wed, 08 Jul 2020 19:11:04 +0200, by Vidar Stiernström
Merge in feature/boundary_optimized_grids
Wed, 08 Jul 2020 18:22:54 +0200, by Vidar Stiernström
Closed branch feature/boundary_optimized_grids feature/boundary_optimized_grids
Wed, 08 Jul 2020 18:20:57 +0200, by Vidar Stiernström
Improve comments feature/boundary_optimized_grids
Tue, 07 Jul 2020 16:23:44 +0200, by Vidar Stiernström
Change +sbp/+util/ to +sbp/+grid and change function names to camel case feature/boundary_optimized_grids
Tue, 07 Jul 2020 16:08:08 +0200, by Vidar Stiernström
Fix typos in comments feature/boundary_optimized_grids
Tue, 07 Jul 2020 16:00:24 +0200, by Vidar Stiernström
Add displacement BC on normal tangential components, but it is only provably stable if traction bc are used for the other component. feature/poroelastic
Thu, 02 Jul 2020 20:05:50 -0700, by Martin Almquist
Add frictional fault interface in Elastic2dAnisotropicCurve feature/poroelastic
Thu, 02 Jul 2020 15:00:21 -0700, by Martin Almquist
Merge heads. feature/poroelastic
Mon, 29 Jun 2020 15:26:36 -0700, by Martin Almquist
Merge heads feature/poroelastic
Mon, 29 Jun 2020 15:24:21 -0700, by Martin Almquist
Add normal-tangential traction BC ElasticCurvilinearAnisotropic feature/poroelastic
Mon, 29 Jun 2020 15:23:01 -0700, by Martin Almquist
Add option to pass a boundary optimized grid to Rectangle.getGrid feature/boundary_optimized_grids
Wed, 01 Jul 2020 17:34:40 +0200, by Vidar Stiernström
Add utility function for constructing a (possibly multidimensional) grid based on the grid points used by the boundary optimized SBP operators feature/boundary_optimized_grids
Wed, 01 Jul 2020 15:15:30 +0200, by Vidar Stiernström
Error-check format of limit arguments feature/boundary_optimized_grids
Wed, 01 Jul 2020 15:13:36 +0200, by Vidar Stiernström
Make accurate/minimalBoundaryOptimizedGrid take the domain limits as input feature/boundary_optimized_grids
Wed, 01 Jul 2020 14:54:21 +0200, by Vidar Stiernström
Make D1Nonequidistant use the grid generation functions accurate/minimalBoundaryOptimizedGrid and remove grid generation from +implementations feature/boundary_optimized_grids
Wed, 01 Jul 2020 13:43:32 +0200, by Vidar Stiernström
Add utility functions for constructing the grids used by the boundary optimized D1Nonequidistant opsets feature/boundary_optimized_grids
Wed, 01 Jul 2020 11:15:57 +0200, by Vidar Stiernström
New branch for developing grids based on the boundary optimized sbp opertors feature/boundary_optimized_grids
Wed, 01 Jul 2020 17:44:34 +0200, by Vidar Stiernström
Bugfix in Elastic2dVariable feature/poroelastic
Tue, 23 Jun 2020 13:31:01 -0700, by Martin Almquist
Make forcingSetup return empty array instead of zero function if all boundary data functions are empty. feature/poroelastic
Mon, 15 Jun 2020 16:11:35 -0700, by Martin Almquist
Add working implementation of Elastic2dStaggeredCurvilinearAnisotropic, which wraps around the Cartesian anisotropic scheme. feature/poroelastic
Sun, 07 Jun 2020 11:33:44 -0700, by Martin Almquist
Add bcSetup for staggered, where displacement and traction data must be evaluated on different grids. feature/poroelastic
Sun, 07 Jun 2020 11:32:19 -0700, by Martin Almquist
Add interfaces in Elastic2dStaggeredAnisotropic feature/poroelastic
Sun, 07 Jun 2020 11:30:49 -0700, by Martin Almquist
Add extra input pars to multiblock/Grid.getBoundary(), to be able to use the Staggered getBoundary method feature/poroelastic
Sun, 07 Jun 2020 11:28:22 -0700, by Martin Almquist
Add better getBoundary method in grid/Staggered feature/poroelastic
Sun, 07 Jun 2020 11:26:40 -0700, by Martin Almquist
Fix typos in comments feature/poroelastic
Sun, 07 Jun 2020 11:22:29 -0700, by Martin Almquist
Change metric computation in CurvilinearUpwind so that one can use odd orders for the diffOp feature/poroelastic
Wed, 03 Jun 2020 10:29:53 -0700, by Martin Almquist
Add support for plotting and evaluating on curvilinear multiblock staggered grids feature/poroelastic
Tue, 02 Jun 2020 11:44:38 -0700, by Martin Almquist
Correct error messages in lebedev2d feature/poroelastic
Mon, 01 Jun 2020 19:00:31 -0700, by Martin Almquist
Set default stiffness tensors to 0 in CurvilinearAnisotropic schemes feature/poroelastic
Sun, 31 May 2020 21:59:09 -0700, by Martin Almquist
Allow using D1 D1 in VariableAnisotropicUpwind feature/poroelastic
Sun, 31 May 2020 21:58:40 -0700, by Martin Almquist
In CruvilinearAnisotropicUpwind: Make D1Upwind default opSet. Use D2Standard for metric derivatives. Bugfix global quadrature. feature/poroelastic
Sun, 31 May 2020 20:18:45 -0700, by Martin Almquist
Add class for upwind D1 based on the standard norm matrices feature/poroelastic
Sun, 31 May 2020 20:16:54 -0700, by Martin Almquist
Add Elastic2dVariableAnisotropicMixedStencil feature/poroelastic
Wed, 27 May 2020 16:44:19 -0700, by Martin Almquist
Add preallocation for D in StaggeredAnisotropic feature/poroelastic
Thu, 30 Apr 2020 21:19:47 -0700, by Martin Almquist
Add displacement BC in StaggeredAnisotropic feature/poroelastic
Thu, 30 Apr 2020 20:55:26 -0700, by Martin Almquist
Start working on displacement bc, clean up traction. feature/poroelastic
Thu, 30 Apr 2020 11:30:55 -0700, by Martin Almquist
Add staggered Lebedev scheme for Cartesian anisotropic. Traction BC work! feature/poroelastic
Wed, 29 Apr 2020 21:05:01 -0700, by Martin Almquist
Add helper function for 2d Lebedev grid feature/poroelastic
Wed, 29 Apr 2020 21:04:06 -0700, by Martin Almquist
Rename the Staggered1d grid class Staggered feature/poroelastic
Wed, 29 Apr 2020 21:03:28 -0700, by Martin Almquist
Fix bug with incorrect grids returned by D1StaggeredUpwind feature/poroelastic
Wed, 29 Apr 2020 21:02:05 -0700, by Martin Almquist
Remove dummy line in Eastic2dVariableAnisotropic. feature/poroelastic
Wed, 29 Apr 2020 21:01:09 -0700, by Martin Almquist
Add staggered operators and 1D grids feature/poroelastic
Tue, 14 Apr 2020 17:50:49 -0700, by Martin Almquist
Speed up computations using RungeKuttaSecondOrder when only the source term is time dependent. feature/FMMlabb
Fri, 13 Mar 2020 12:07:00 +0100, by Vidar Stiernström
Assert that the inner radius is positive feature/FMMlabb
Wed, 12 Feb 2020 13:27:27 +0100, by Vidar Stiernström
Minor cleanup feature/FMMlabb
Tue, 11 Feb 2020 19:17:49 +0100, by Vidar Stiernström
Fix boundary groups feature/FMMlabb
Wed, 22 Jan 2020 16:10:46 +0100, by Ylva Rydin
Add annulus feature/FMMlabb
Wed, 22 Jan 2020 15:18:11 +0100, by Ylva Rydin
Make Elastic2dVariable faster and more memory efficient feature/poroelastic
Tue, 04 Feb 2020 10:15:42 -0800, by Martin Almquist
Add (temporary) fix for e-s , w-n, and x-x couplings feature/poroelastic
Tue, 07 Jan 2020 12:49:09 -0800, by Martin Almquist
Merge in latest changes from default feature/volcano
Wed, 20 Nov 2019 14:26:57 -0800, by Vidar Stiernström
Merged in feature/dirac_discr (pull request #17)
Wed, 20 Nov 2019 22:24:06 +0000, by Vidar Stiernström
Close branch feature/dirac_discr feature/dirac_discr
Wed, 20 Nov 2019 22:24:06 +0000, by Vidar Stiernström
Clean up hypsyst3d; use functionality from grid module and remove obsolete properties. Store operators for different coord dirs in cell arrays. feature/volcano
Wed, 20 Nov 2019 14:12:55 -0800, by Vidar Stiernström
Merge in default feature/dirac_discr
Wed, 20 Nov 2019 21:05:37 +0100, by Jonatan Werpers
Apply some nitpicking feature/dirac_discr
Wed, 20 Nov 2019 21:02:06 +0100, by Jonatan Werpers
Avoid indentation of whole function feature/dirac_discr
Wed, 20 Nov 2019 20:30:45 +0100, by Jonatan Werpers
Use assertType instead of assert(isa(...)) feature/dirac_discr
Wed, 20 Nov 2019 20:22:53 +0100, by Jonatan Werpers
Use rng(1) to set seed in diracDiscrTest because hex-speak crashed. feature/dirac_discr
Tue, 19 Nov 2019 17:11:33 -0800, by Martin Almquist
Merge heads feature/dirac_discr
Tue, 19 Nov 2019 17:04:32 -0800, by Martin Almquist
Turn row vectors into column vectors in diracDiscr comments feature/dirac_discr
Tue, 19 Nov 2019 17:01:38 -0800, by Martin Almquist
Factor out Jacobian computation in diracDiscrCurve.m feature/dirac_discr
Tue, 19 Nov 2019 16:59:11 -0800, by Martin Almquist
Minor clean up feature/dirac_discr
Tue, 19 Nov 2019 16:21:26 -0800, by Vidar Stiernström
Merge with refactorization of computing source indices feature/dirac_discr
Tue, 19 Nov 2019 16:06:03 -0800, by Vidar Stiernström
Remove overloading of norm() and fnorm feature/dirac_discr
Wed, 20 Nov 2019 00:13:56 +0100, by Jonatan Werpers
Attempt to factor out a function for finding indecies of the source feature/dirac_discr
Wed, 20 Nov 2019 00:10:30 +0100, by Jonatan Werpers
Make all if-branches have the same order of variable assignments feature/dirac_discr
Tue, 19 Nov 2019 23:51:32 +0100, by Jonatan Werpers
- Pass grids to diracDiscr and adjust tests. feature/dirac_discr
Tue, 19 Nov 2019 15:16:08 -0800, by Vidar Stiernström
Merge in curvilinear discr of dirac delta feature/dirac_discr
Tue, 19 Nov 2019 13:55:43 -0800, by Vidar Stiernström
Clean up diracDiscr, remove obsolete tests. feature/dirac_discr
Tue, 19 Nov 2019 13:54:41 -0800, by Vidar Stiernström
Add opSet to Hypsyst3d feature/volcano
Mon, 18 Nov 2019 17:17:16 -0800, by Vidar Stiernström
Add diracDiscrCurve.m feature/dirac_discr
Tue, 19 Nov 2019 13:47:17 -0800, by Martin Almquist
Add multi-d dirac discretization with tests feature/dirac_discr
Tue, 19 Nov 2019 10:56:57 -0800, by Martin Almquist
Utilize grid module in Hypsyst3d. Pass cartesian grid and replace some of the previous functionality in Hypsyst3d with properties/methods for cartesian grids. feature/volcano
Mon, 18 Nov 2019 10:31:58 -0800, by Vidar Stiernström
Add Upwind ElasticAnisotropic schemes. Seem to work really well! feature/poroelastic
Sat, 16 Nov 2019 14:26:06 -0800, by Martin Almquist
Add missing properties and methods to Hypsyst3D and Hypsyst3Dcurve. Note: These functions are NOT implemented properly and mearly work as place holders. feature/volcano
Tue, 12 Nov 2019 09:00:48 -0800, by Vidar Stiernström
Make sure matrices are sparse. feature/rv
Wed, 06 Nov 2019 14:52:07 +0100, by Vidar Stiernström
Use fine-to-coarse interpolation operators in coarse grid flux discretization feature/rv
Wed, 06 Nov 2019 14:51:33 +0100, by Vidar Stiernström
Closing branch rv_diffOp_test
Mon, 05 Aug 2019 10:48:37 +0200, by Vidar Stiernström
Merge bug fix from feature/rv rv_diffOp_test
Tue, 05 Mar 2019 10:59:39 +0100, by Vidar Stiernström
Attempt to reduce unnessecary operations when using the RV diffOps. Does not seem to improve efficiency at this stage. rv_diffOp_test
Tue, 05 Mar 2019 10:56:29 +0100, by Vidar Stiernström
Merged in feature/d2_compatible (pull request #15)
Wed, 13 Nov 2019 23:36:19 +0000, by Martin Almquist
Close branch feature/d2_compatible feature/d2_compatible
Wed, 13 Nov 2019 23:36:19 +0000, by Martin Almquist
Merge with default feature/d2_compatible
Wed, 13 Nov 2019 15:35:27 -0800, by Martin Almquist
Improve efficiency of construction of D2(b) by precomputing as much as possible feature/d2_compatible
Wed, 13 Nov 2019 14:54:22 -0800, by Martin Almquist
Merged in feature/joingrids (pull request #16)
Wed, 13 Nov 2019 22:13:20 +0000, by Martin Almquist
Close branch feature/joingrids feature/joingrids
Wed, 13 Nov 2019 22:13:20 +0000, by Martin Almquist
Add stress operators to scheme anisotropic curvilinear feature/poroelastic
Mon, 21 Oct 2019 18:08:22 -0700, by Martin Almquist
Add physical normals to AnisotropicCurvilinear feature/poroelastic
Mon, 14 Oct 2019 13:54:50 -0700, by Martin Almquist
Add new implementation of Laplace curvilinear feature/poroelastic
Mon, 14 Oct 2019 13:49:50 -0700, by Martin Almquist
Add physical derivatives Dx and Dy to ElasticCurvilinearAnisotropic feature/poroelastic
Fri, 27 Sep 2019 13:18:09 -0700, by Martin Almquist
Add CG interface coupling feature/laplace_curvilinear_test
Sun, 22 Sep 2019 19:05:17 -0700, by Martin Almquist
Swap indices in anisotropic curvilinear feature/poroelastic
Fri, 20 Sep 2019 15:38:39 -0700, by Martin Almquist
Merge heads feature/poroelastic
Fri, 20 Sep 2019 15:00:19 -0700, by Martin Almquist
Swap indices and fix bug in ElasticVariableAnisotropic feature/poroelastic
Fri, 20 Sep 2019 14:57:02 -0700, by Martin Almquist
Fix performance (full matrices) issues in ElasticVariableAnisotropic feature/poroelastic
Sun, 15 Sep 2019 14:39:42 -0700, by Martin Almquist
Add scheme for anisotropic curvilinear feature/poroelastic
Sat, 07 Sep 2019 13:05:26 -0700, by Martin Almquist
Add anisotropic interface feature/poroelastic
Fri, 06 Sep 2019 14:21:18 -0700, by Martin Almquist
Update comments in Anisotropic feature/poroelastic
Thu, 05 Sep 2019 17:10:58 -0700, by Martin Almquist
Make Anisotropic work for mixed displacement/traction BC at the same boundary. feature/poroelastic
Thu, 05 Sep 2019 16:41:49 -0700, by Martin Almquist
Add fully compatible D2Variable opSet and first implementation of ElasticAnisotropic feature/poroelastic
Thu, 05 Sep 2019 14:13:00 -0700, by Martin Almquist
Fix spelling mistake in comments. feature/poroelastic
Thu, 22 Aug 2019 11:55:35 -0700, by Martin Almquist
Add multiblock.joinGrids, which joins several multiblock grids into one. feature/joingrids
Sat, 17 Aug 2019 16:20:07 -0700, by Martin Almquist
Add OpSet for fully compatible D2Variable, created from regular D2Variable by replacing d1 by first row of D1. Formal reduction by one order of accuracy at the boundary point. feature/d2_compatible
Fri, 16 Aug 2019 14:30:28 -0700, by Martin Almquist
Merge with default feature/rv
Wed, 07 Aug 2019 15:23:42 +0200, by Vidar Stiernström
Add option to discretize Burgers1d using quasi-linear form feature/rv
Wed, 07 Aug 2019 13:28:21 +0200, by Vidar Stiernström
Add higher order approximations to BDFDerivative feature/rv
Wed, 07 Aug 2019 13:27:36 +0200, by Vidar Stiernström
Comment out filtering option in ResidualViscosity feature/rv
Mon, 05 Aug 2019 10:45:08 +0200, by Vidar Stiernström
Add options for postprocessing RV feature/rv
Mon, 29 Jul 2019 16:44:21 +0200, by Vidar Stiernström
Fix indentation feature/rv
Mon, 29 Jul 2019 16:43:39 +0200, by Vidar Stiernström
Change to use the interpolation operators in sbplib feature/rv
Mon, 29 Jul 2019 16:43:08 +0200, by Vidar Stiernström
Refactor constructDiffops and remove closures from some of the diffops used to compute the residual. feature/rv
Mon, 08 Jul 2019 15:12:19 +0200, by Vidar Stiernström
Add missing semicolon feature/rv
Mon, 08 Jul 2019 14:50:46 +0200, by Vidar Stiernström
Rename class property grid to g, to avoid confusion with grid package feature/rv
Mon, 08 Jul 2019 14:50:19 +0200, by Vidar Stiernström
Allow for time dependent data when construcing the ODE RHS feature/rv
Mon, 08 Jul 2019 14:48:56 +0200, by Vidar Stiernström
Add 1d shapiro filter function to ResidualViscosity feature/rv
Fri, 05 Jul 2019 19:08:37 +0200, by Vidar Stiernström
Fix incorrect of RungekuttaRvInstage feature/rv
Fri, 05 Jul 2019 18:12:10 +0200, by Vidar Stiernström
Move specialized constructDiffOps* into constructDiffOps.m. Add multigrid RV using the standard RungekuttaRV time stepper feature/rv
Fri, 05 Jul 2019 17:51:11 +0200, by Vidar Stiernström
Add RungekuttaRv to getRvTimesteppers feature/rv
Fri, 05 Jul 2019 17:48:54 +0200, by Vidar Stiernström
Add standard RungekuttaRv feature/rv
Fri, 05 Jul 2019 17:47:13 +0200, by Vidar Stiernström
Move instage rungekutta time stepping to RungekuttaRvInstage feature/rv
Fri, 05 Jul 2019 16:51:05 +0200, by Vidar Stiernström
Add missing semicolons feature/rv
Fri, 05 Jul 2019 16:49:19 +0200, by Vidar Stiernström
Add getTimestepper for the RV time steppers feature/rv
Fri, 28 Jun 2019 17:24:01 +0200, by Vidar Stiernström
Add wrapper function calling constructDiffOps* for a specified RV method feature/rv
Fri, 28 Jun 2019 15:13:44 +0200, by Vidar Stiernström
Fix bug in constructDiffOpsMultiGrid feature/rv
Fri, 28 Jun 2019 15:11:45 +0200, by Vidar Stiernström
Update comments for RungekuttaRvMultiStage/Grid feature/rv
Fri, 28 Jun 2019 13:50:04 +0200, by Vidar Stiernström
Not a viable idea. Closing branch. feature/rv
Fri, 28 Jun 2019 13:36:03 +0200, by Vidar Stiernström
Update variable names and comments in RungekuttaRvMultiGrid feature/rv
Fri, 28 Jun 2019 13:33:49 +0200, by Vidar Stiernström
Remove obsolete function feature/rv
Fri, 28 Jun 2019 13:24:45 +0200, by Vidar Stiernström
Dont return penalty terms from operators on coarse grid. One can use the penalty terms constructed for the fine grid feature/rv
Fri, 28 Jun 2019 13:22:03 +0200, by Vidar Stiernström
Actually return coarse grid operators from constructDiffOpsMultiGrid feature/rv
Fri, 28 Jun 2019 13:18:58 +0200, by Vidar Stiernström
Fix incorrect filename feature/rv
Fri, 28 Jun 2019 13:14:59 +0200, by Vidar Stiernström
Rename RungekuttaRV time steppers. Add RungekuttaRVMultiStage time stepper feature/rv
Fri, 28 Jun 2019 13:13:17 +0200, by Vidar Stiernström
Add method for constructing diffops to multistage approach of computing the residual viscosity. Differentiate between constructDiffOpsMultiGrid and constructDiffOpsMultiStage feature/rv
Fri, 28 Jun 2019 13:12:29 +0200, by Vidar Stiernström
Make constructDiffOps return a struct with the operators feature/rv
Fri, 28 Jun 2019 12:53:47 +0200, by Vidar Stiernström
Add function for constructing differential operator on coarser mesh. Not sure if it will be usefull tho. feature/rv
Thu, 27 Jun 2019 17:15:11 +0200, by Vidar Stiernström
Pass RHS of unstabilized ode to RKExterirorRvMg feature/rv
Thu, 27 Jun 2019 17:14:30 +0200, by Vidar Stiernström
Remove unnecessary variable feature/rv
Thu, 27 Jun 2019 17:13:28 +0200, by Vidar Stiernström
Move all functions in constructDiffOps to subpackage and refactor feature/rv
Thu, 27 Jun 2019 11:04:34 +0200, by Vidar Stiernström
Add missing semicolons feature/rv
Thu, 27 Jun 2019 11:03:40 +0200, by Vidar Stiernström
Use same order for both time derivative and flux term when computing the residual feature/rv
Tue, 25 Jun 2019 17:00:27 +0200, by Vidar Stiernström
First attempt at multi-grid calculation of the residual feature/rv
Tue, 25 Jun 2019 16:52:54 +0200, by Vidar Stiernström
Fix bug using 2d maximum neighborhood in 1d feature/rv
Tue, 25 Jun 2019 15:04:53 +0200, by Vidar Stiernström
Add option to compute maximum neighbordhood residual feature/rv
Tue, 25 Jun 2019 14:14:25 +0200, by Vidar Stiernström
Add residual order as an input argument to constructDiffOps feature/rv
Tue, 25 Jun 2019 13:24:01 +0200, by Vidar Stiernström
Attempt to fix oscilations when not using bdfs by adding lower-order 2nd derivative correction term to the Residual feature/rv
Tue, 25 Jun 2019 13:06:42 +0200, by Vidar Stiernström
Change penalty term and add missing semicolon feature/rv
Mon, 24 Jun 2019 17:44:21 +0200, by Vidar Stiernström
Improve efficiency of diffOps in Burgers2d, the artificial diffusion operator in rv.constructDiffOps and the RungekuttaExteriorRv time-steppers feature/rv
Wed, 06 Mar 2019 09:45:52 +0100, by Vidar Stiernström
Fix bug in Burgers schemes resulting in incorrect wave speed. feature/rv
Tue, 05 Mar 2019 10:57:26 +0100, by Vidar Stiernström
Clean up in +rv/+time. Make the time stepping more efficient by not storing unnessecary properties in the RK-RV time steppers feature/rv
Tue, 05 Mar 2019 10:53:34 +0100, by Vidar Stiernström
Set RV artificial viscosity to zero around borders of the domain feature/rv
Mon, 18 Feb 2019 09:00:00 +0100, by Vidar Stiernström
Implement local residual normalization functions feature/rv
Thu, 24 Jan 2019 10:23:52 +0100, by Vidar Stiernström
Change Burgers2d to inviscid formulation. Rewrite to use opSets and fix the implementation of the Dirichlet conditions. feature/rv
Thu, 24 Jan 2019 09:05:44 +0100, by Vidar Stiernström
Implement the correct Dirichlet conditions for Burgers1d feature/rv
Thu, 24 Jan 2019 09:01:10 +0100, by Vidar Stiernström
Rename scheme according to conventions feature/rv
Sat, 19 Jan 2019 17:22:09 +0100, by Vidar Stiernström
Add missing semicolon feature/rv
Sat, 19 Jan 2019 17:20:14 +0100, by Vidar Stiernström
closing branch. Changes merged to feature/rv feature/advectionRV
Mon, 05 Aug 2019 10:51:33 +0200, by Vidar Stiernström
Branch obsolete. Integratd into the branch feature/rv feature/burgers2d
Fri, 18 Jan 2019 09:23:13 +0100, by Vidar Stiernström
Closing branch. Branch integrated into feature/rv feature/burgers1d
Fri, 18 Jan 2019 09:24:29 +0100, by Vidar Stiernström
Closing branch rv-interpolation
Mon, 05 Aug 2019 10:49:21 +0200, by Vidar Stiernström
Multiply by 2 in VirtaMin so that scheme is actually provably stable. feature/laplace_curvilinear_test
Fri, 21 Jun 2019 17:28:33 +0200, by Martin Almquist
Update borrowing constants so that M constants are from Virta2014 and R constants are for bp=2,4,7. feature/laplace_curvilinear_test
Fri, 21 Jun 2019 17:28:02 +0200, by Martin Almquist
Implement minimum check in new scheme. feature/laplace_curvilinear_test
Fri, 21 Jun 2019 16:27:49 +0200, by Martin Almquist
Bugfixes in VirtaMin.interfaceStandard() feature/laplace_curvilinear_test
Mon, 10 Jun 2019 14:39:14 +0200, by Martin Almquist
Fix minimum and correct borrowing in VirtaMin scheme. feature/laplace_curvilinear_test
Mon, 10 Jun 2019 13:27:29 +0200, by Martin Almquist
Add LaplaceCurvilinear schemes where the minimum check will be implemented. The Virta scheme will be used for comparison only. feature/laplace_curvilinear_test
Mon, 10 Jun 2019 10:43:12 +0200, by Martin Almquist
Add multiblock.Grid.expandFunc() feature/laplace_curvilinear_test
Thu, 30 May 2019 12:07:40 -0700, by Martin Almquist
Make LaplaceCurvilinear work for coeff a and b that are scalar, grid functions, or function handles. feature/laplace_curvilinear_test
Mon, 27 May 2019 16:53:32 -0700, by Martin Almquist
Generalize multiblock.evalOn() to work for a mix of function handles and grid functions feature/laplace_curvilinear_test
Mon, 27 May 2019 16:52:28 -0700, by Martin Almquist
Improve Rectangle.show() feature/laplace_curvilinear_test
Mon, 27 May 2019 16:34:38 -0700, by Martin Almquist
Add 2d tests for derivative of delta function, and confirm that they work. feature/laplace_curvilinear_test
Wed, 22 May 2019 15:31:26 -0700, by Martin Almquist
Add derivative of delta functions and corresponding tests, tested for 1D. feature/laplace_curvilinear_test
Tue, 21 May 2019 18:44:01 -0700, by Martin Almquist
Refactor diracDiscr.m by moving the helper function diracDiscr1D to a separate file. feature/laplace_curvilinear_test
Tue, 21 May 2019 18:10:06 -0700, by Martin Almquist
Copy diracDiscr.m from feature/poroelastic feature/laplace_curvilinear_test
Tue, 21 May 2019 17:59:30 -0700, by Martin Almquist
In LaplaceCurvilinear, use grid spacings from 1d opSets instead of using grid.scaling() feature/laplace_curvilinear_test
Wed, 15 May 2019 16:55:02 -0700, by Martin Almquist
Copy-paste improved Curve class from feature/laplace_curvilinear_test feature/poroelastic
Mon, 13 May 2019 10:18:55 -0700, by Martin Almquist
Copy dataSpline() from feature/laplace_curvilinear_test feature/poroelastic
Sat, 11 May 2019 19:19:09 -0700, by Martin Almquist
Divergence and Gradient do not work for multi-block. Not sure how to fix, left error message for now. feature/poroelastic
Sat, 11 May 2019 17:52:08 -0700, by Martin Almquist
Merge heads feature/poroelastic
Sat, 11 May 2019 16:36:33 -0700, by Martin Almquist
Bugfix Elastic2dCurve feature/poroelastic
Fri, 10 May 2019 15:26:47 -0700, by Martin Almquist
Add diffOp for gradient feature/poroelastic
Sat, 11 May 2019 15:11:04 -0700, by Martin Almquist
In RungeKuttaDiscreteData, make K and U non-sparse to improve performance by roughly a factor of 3. feature/poroelastic
Tue, 07 May 2019 11:41:15 -0700, by Martin Almquist
Add diffOp (currently scheme) for Divergence, not sure if this belongs in +scheme. feature/poroelastic
Mon, 06 May 2019 21:23:21 -0700, by Martin Almquist
Introduce optFlag so that one can choose not to build the optimization-related cell of matrices called B. It is too computationally costly and should probably be done in a different way. feature/poroelastic
Sun, 05 May 2019 19:05:31 -0700, by Martin Almquist
Fix bug in LaplCurveNewCorner that makes bc matrix non-sparse. feature/poroelastic
Sat, 04 May 2019 14:44:34 -0700, by Martin Almquist
Bugfix minus sign in Laplace1d Dirichlet penalty.
Thu, 02 May 2019 13:25:14 -0700, by Martin Almquist
Temporary ugly fix for reversing direction of boundary in interface coupling feature/laplace_curvilinear_test
Mon, 29 Apr 2019 12:55:51 -0700, by Martin Almquist
Add tests for time.Rungekutta4 and time.Rungekutta4SecondOrder feature/timesteppers
Wed, 10 Apr 2019 23:10:13 +0200, by Jonatan Werpers
Change name of property k to dt in time.Timestepper feature/timesteppers
Wed, 10 Apr 2019 22:40:55 +0200, by Jonatan Werpers
Merge with default feature/timesteppers
Wed, 10 Apr 2019 22:22:46 +0200, by Jonatan Werpers
Clean up time.rk.get_rk4_time_step() feature/timesteppers
Wed, 10 Apr 2019 22:21:13 +0200, by Jonatan Werpers
Bugfix in interfaceNonconforming(). Remove unused properties gamm_u, gamm_v. feature/laplace_curvilinear_test
Wed, 10 Apr 2019 13:27:50 -0700, by Martin Almquist
Remove unused borrowing parameter gamma in interfaceStandard feature/laplace_curvilinear_test
Wed, 10 Apr 2019 11:28:23 -0700, by Martin Almquist
Merge with default feature/laplace_curvilinear_test
Wed, 10 Apr 2019 11:00:27 -0700, by Martin Almquist
Add parameter in runtestsAll() and runtestsPackage() so that they include tests in subpackages
Wed, 10 Apr 2019 22:11:11 +0200, by Jonatan Werpers
Merged in feature/dataspline (pull request #14)
Tue, 09 Apr 2019 20:24:21 +0000, by Martin Almquist
Close branch feature/dataspline feature/dataspline
Tue, 09 Apr 2019 20:24:21 +0000, by Martin Almquist
Remove some obsolete comments feature/timesteppers
Tue, 09 Apr 2019 22:22:03 +0200, by Jonatan Werpers
In Curve.arcLengthParametrization(), upgrade linear interpolation to monotonicity-preserving cubic splines. feature/dataspline
Tue, 09 Apr 2019 13:19:55 -0700, by Martin Almquist
Add skeleton for time.rk.ExplicitSecondOrder feature/timesteppers
Tue, 09 Apr 2019 22:17:07 +0200, by Jonatan Werpers
Add functions for evaluating a functions for each timestep. feature/timesteppers
Tue, 09 Apr 2019 22:04:51 +0200, by Jonatan Werpers
Merge with default feature/timesteppers
Tue, 09 Apr 2019 21:48:30 +0200, by Jonatan Werpers
Remove unused properties from rk.Explicit feature/timesteppers
Wed, 23 Jan 2019 10:02:13 +0100, by Jonatan Werpers
Bugfix Curve.arcLengthParametrization() by using linear interpolation instead of higher-order spline for parameter as a funciton of arclength. Generalize dataSpline() to curves in higher dimensions. feature/dataspline
Tue, 09 Apr 2019 09:50:44 -0700, by Martin Almquist
Merge in default feature/dataspline
Mon, 08 Apr 2019 22:30:47 +0200, by Jonatan Werpers
Merged in feature/laplace1dUpdate (pull request #13)
Mon, 08 Apr 2019 20:15:37 +0000, by Jonatan Werpers
Close branch feature/laplace1dUpdate feature/laplace1dUpdate
Mon, 08 Apr 2019 20:15:37 +0000, by Jonatan Werpers
Revert changes in Curve so that spline() is not a static method. feature/dataspline
Fri, 05 Apr 2019 13:33:25 -0700, by Martin Almquist
Remove some comments in dataSpline() feature/dataspline
Fri, 05 Apr 2019 13:15:45 -0700, by Martin Almquist
Bugfix in dataSpline(), reparameterize with parameter from 0 to 1 before using Curve. feature/dataspline
Fri, 05 Apr 2019 13:14:29 -0700, by Martin Almquist
Rewrite dataSpline() avoiding the spline function in Curve and using fnder for the differentiation feature/dataspline
Fri, 05 Apr 2019 10:17:04 +0200, by Jonatan Werpers
Remove some spurious empty lines feature/dataspline
Fri, 05 Apr 2019 09:06:03 +0200, by Jonatan Werpers
Add function parametrization/dataSpline which accepts data points and returns a Curve object consisting of a spline interpolant with the arclength parametrization. feature/dataspline
Thu, 04 Apr 2019 17:57:24 -0700, by Martin Almquist
Turn the helper function spline into a static method in the Curve class. feature/dataspline
Thu, 04 Apr 2019 17:55:57 -0700, by Martin Almquist
Improve comments in LaplCurve. feature/laplace_curvilinear_test
Fri, 29 Mar 2019 14:50:50 -0700, by Martin Almquist
Make LaplaceCurvilinearNew the default version and remove the others feature/laplace_curvilinear_test
Fri, 29 Mar 2019 14:41:36 -0700, by Martin Almquist
Clean up Dirichlet BC code in LaplaceCurvilinearNew. feature/laplace_curvilinear_test
Fri, 29 Mar 2019 14:24:39 -0700, by Martin Almquist
Fix bug in new implementations that made matrices non-sparse. feature/laplace_curvilinear_test
Wed, 27 Mar 2019 15:56:42 -0700, by Martin Almquist
Divide interface penalty strength by 4, to make it sharp. Stability verified by eigenvalue computations. feature/laplace1dUpdate
Tue, 05 Mar 2019 12:41:50 -0800, by Martin Almquist
Add d and n as acceptable boundary condition identifiers, which is consistent with eg LaplaceCurvilinear. feature/laplace1dUpdate
Tue, 05 Mar 2019 11:26:42 -0800, by Martin Almquist
Bugfix in interface SATs, Staggered1DAcousticsVariable feature/d1_staggered
Tue, 05 Mar 2019 11:18:44 -0800, by Martin Almquist
Add H_1D to LaplaceCurvilinearNewCorner feature/poroelastic
Sun, 03 Mar 2019 15:00:42 -0800, by Martin Almquist
Bugfix missing semi-colon in Laplace1d.
Wed, 20 Feb 2019 16:14:15 -0800, by Martin Almquist
Bugfix in multiblock.domain.Line method getGrid.
Wed, 20 Feb 2019 12:32:49 -0800, by Martin Almquist
Add function show() that mimics julias @show
Wed, 13 Feb 2019 20:56:24 +0100, by Jonatan Werpers
Merge in feature/grids/LaplaceSquared
Wed, 13 Feb 2019 20:52:14 +0100, by Jonatan Werpers
Close branch before merge feature/grids/LaplaceSquared
Wed, 13 Feb 2019 20:51:56 +0100, by Jonatan Werpers
Formatting fix feature/grids/LaplaceSquared
Wed, 13 Feb 2019 20:49:39 +0100, by Jonatan Werpers
Fix bug in d3 boundary condition feature/grids/LaplaceSquared
Wed, 13 Feb 2019 10:24:06 +0100, by Jonatan Werpers
Merge with default feature/grids/LaplaceSquared
Tue, 12 Feb 2019 17:12:42 +0100, by Jonatan Werpers
Merge with default feature/grids/LaplaceSquared
Thu, 20 Sep 2018 12:05:20 +0200, by Jonatan Werpers
Start work on LaplaceSquared. FULL OF ERRORS?! feature/grids/LaplaceSquared
Tue, 24 Jul 2018 21:08:08 -0700, by Jonatan Werpers
Copy-paste updates from LaplCurvNewCorner to LaplCurvNew, and then modify the corner part. feature/laplace_curvilinear_test
Wed, 23 Jan 2019 17:11:48 -0800, by Martin Almquist
Add variable b. Tested for interface and Dirichlet, but not Neumann yet. feature/laplace_curvilinear_test
Tue, 22 Jan 2019 19:18:24 -0800, by Martin Almquist
Implement new penalty strength for interface. Bugfix missing coeff a in Dirichlet penalty. feature/laplace_curvilinear_test
Tue, 22 Jan 2019 18:17:01 -0800, by Martin Almquist
Clean up getBoundarOperator/Quadrature as was done on feature/getBoundaryOp. Temporarily re-add lambda so that old interface method works. feature/laplace_curvilinear_test
Tue, 22 Jan 2019 12:53:13 -0800, by Martin Almquist
Add scheme where only corner points are multiplied by dim. Does not seem to decrease spectral radius much, but is stable. feature/laplace_curvilinear_test
Thu, 17 Jan 2019 18:57:54 -0800, by Martin Almquist
Set tuning to 1.0 in both old and new Dirichlet. feature/laplace_curvilinear_test
Thu, 17 Jan 2019 18:18:00 -0800, by Martin Almquist
Add LaplaceCurvilinearNew and implement Dirichlet BC using new borrowing. feature/laplace_curvilinear_test
Tue, 15 Jan 2019 15:08:29 -0800, by Martin Almquist
Merge with feature/getBoundaryOp feature/laplace_curvilinear_test
Mon, 14 Jan 2019 18:14:44 -0800, by Martin Almquist
Add multiblock domain Line
Thu, 07 Feb 2019 18:42:50 -0800, by Martin Almquist
Elastic2dVariable: Clean up alpha in getBoundaryOperator. Add alpha1 and alpha2 as boundary operators. feature/poroelastic
Sat, 26 Jan 2019 16:56:35 -0800, by Martin Almquist
Massive boundary operator cleanup in Elastic2dVariable feature/poroelastic
Sat, 26 Jan 2019 15:38:58 -0800, by Martin Almquist
Remove superfluous method get_boundary_number in Elastic2dVariable feature/poroelastic
Fri, 25 Jan 2019 16:35:53 -0800, by Martin Almquist
In Elastic2dVariable: copy-paste from feature/getBoundaryOp and fix bugs introduced there. feature/poroelastic
Fri, 25 Jan 2019 15:52:21 -0800, by Martin Almquist
Elastic2dVariable: boundary condition type can now be a string, normal or tangential, as well as component number. feature/poroelastic
Fri, 25 Jan 2019 15:15:44 -0800, by Martin Almquist
Copy-paste LaplCurviNewCorner from laplace branch. feature/poroelastic
Fri, 25 Jan 2019 14:04:23 -0800, by Martin Almquist
Merged in feature/getBoundaryOp (pull request #12)
Thu, 24 Jan 2019 08:29:50 +0000, by Jonatan Werpers
Close branch feature/getBoundaryOp feature/getBoundaryOp
Thu, 24 Jan 2019 08:29:50 +0000, by Jonatan Werpers
Elastic2dCurv: Rename get_boundary_op and add getBoundaryQuadrature feature/getBoundaryOp
Wed, 23 Jan 2019 16:57:50 -0800, by Martin Almquist
Bugfix: add missing brackets in getBoundaryQuadrature in LaplCurv and Utux2d feature/getBoundaryOp
Tue, 22 Jan 2019 12:50:06 -0800, by Martin Almquist
Fix mistakes in adbb80e60b10 feature/getBoundaryOp
Tue, 22 Jan 2019 11:27:30 -0800, by Martin Almquist
Add getBoundaryQuadrature to all 1d diffOps feature/getBoundaryOp
Tue, 22 Jan 2019 11:17:28 -0800, by Martin Almquist
Clean up Elastic2dVariable (partially), Utux, and Utux2d. feature/getBoundaryOp
Tue, 22 Jan 2019 11:12:23 -0800, by Martin Almquist
Fix some mistakes from dc1bcbef2a86 feature/getBoundaryOp
Tue, 22 Jan 2019 17:42:58 +0100, by Jonatan Werpers
Clean up getBoundaryOps for a few schemes feature/getBoundaryOp
Tue, 22 Jan 2019 17:37:07 +0100, by Jonatan Werpers
Remove ability to get several boundary ops at the same time from a few of the schemes feature/getBoundaryOp
Tue, 22 Jan 2019 17:12:22 +0100, by Jonatan Werpers
Merge with default feature/getBoundaryOp
Tue, 22 Jan 2019 16:50:50 +0100, by Jonatan Werpers
Remove static method `interface_coupling` that shouldn't have existed in the first place
Tue, 22 Jan 2019 16:50:05 +0100, by Jonatan Werpers
Add asserts to boundary identifier inputs feature/getBoundaryOp
Tue, 22 Jan 2019 16:47:34 +0100, by Jonatan Werpers
Fix penalty bug in Beam
Tue, 22 Jan 2019 10:46:29 +0100, by Jonatan Werpers
Created a new branch for gathering rv-specific features, since the specific branches are getting nested anyways. feature/rv
Fri, 18 Jan 2019 09:10:45 +0100, by Vidar Stiernström
Allow for the residual normalization function to return a vector. Also change the default normalization from normalizing on norm(u-mean(u),inf) to norm(u/2), since this proved to be better for 1d burgers feature/burgers1d
Fri, 18 Jan 2019 09:06:20 +0100, by Vidar Stiernström
Use opSets in Burgers1d. feature/burgers1d
Fri, 18 Jan 2019 09:04:38 +0100, by Vidar Stiernström
Pass scheme specific parameters as cell array. This will enabale constructDiffOps to be more general. In addition, allow for schemes returning function handles as diffOps, which is currently how non-linear schemes such as Burgers1d are implemented. feature/burgers1d
Fri, 18 Jan 2019 09:02:02 +0100, by Vidar Stiernström
Change argument order to the "correct" order, i.e providing diffOp specific parameters before the opSet. feature/burgers1d
Fri, 18 Jan 2019 08:58:26 +0100, by Vidar Stiernström
Forgot to add .m as file extension feature/burgers1d
Thu, 17 Jan 2019 11:06:13 +0100, by Vidar Stiernström
Rename Burgers1D to Burgers1d feature/burgers1d
Thu, 17 Jan 2019 11:03:22 +0100, by Vidar Stiernström
Merge with branch feature/advectioRV to utilize the +rv package feature/burgers1d
Thu, 17 Jan 2019 10:44:12 +0100, by Vidar Stiernström
Created a new branch for attempting to improve rv, via interpolation rv-interpolation
Thu, 17 Jan 2019 10:42:14 +0100, by Vidar Stiernström
For easier comparison, return both the first order and residual viscosity when evaluating the residual. Add the first order and residual viscosity to the state of the RungekuttaRV time steppers feature/advectionRV
Thu, 17 Jan 2019 10:25:06 +0100, by Vidar Stiernström
Rename Rungekutta-Rv classes according to naming convention feature/advectionRV
Fri, 11 Jan 2019 15:52:48 +0100, by Vidar Stiernström
Create a separate class of RungekuttaExteriorRV which uses BDFs for computing the time derivative. Remove BDFs from RungekuttaExteriorRV feature/advectionRV
Fri, 11 Jan 2019 15:47:10 +0100, by Vidar Stiernström
Remove obsolete AdvectionRV1D scheme feature/advectionRV
Mon, 07 Jan 2019 16:41:21 +0100, by Vidar Stiernström
Support variable wave speed and upwind operators in Utux feature/advectionRV
Mon, 07 Jan 2019 16:35:04 +0100, by Vidar Stiernström
Fix minor issues in rv/constructDiffOps feature/advectionRV
Mon, 07 Jan 2019 16:32:40 +0100, by Vidar Stiernström
Clean up of Utux2d feature/advectionRV
Mon, 07 Jan 2019 16:26:05 +0100, by Vidar Stiernström
Remove obsolete scheme AdvectionRV2d feature/advectionRV
Mon, 07 Jan 2019 13:12:10 +0100, by Vidar Stiernström
Remove incorrect assertion of the number of BC:s feature/advectionRV
Mon, 07 Jan 2019 12:06:49 +0100, by Vidar Stiernström
Add dirichlet bc for north and south boundary and handle cases where the wave speed changes in sign. feature/advectionRV
Mon, 07 Jan 2019 12:06:06 +0100, by Vidar Stiernström
Add upwind dissipation to the operator inside Utux2d feature/advectionRV
Wed, 19 Dec 2018 20:00:27 +0100, by Vidar Stiernström
Add utility for constructing the operators used by a discretization emplying RV-stabilization feature/advectionRV
Fri, 14 Dec 2018 18:33:10 +0100, by Vidar Stiernström
Support upwind opSet in Utux2d feature/advectionRV
Fri, 14 Dec 2018 18:30:27 +0100, by Vidar Stiernström
Merge with default for latest changes feature/advectionRV
Tue, 11 Dec 2018 17:31:28 +0100, by Vidar Stiernström
Add support for using the ODE to approximate the time derivative in the residual feature/advectionRV
Tue, 11 Dec 2018 16:29:21 +0100, by Vidar Stiernström
Add lower level for boot-strapping to RungeKuttaExteriorRV feature/advectionRV
Fri, 07 Dec 2018 13:11:53 +0100, by Vidar Stiernström
Debug ResidualViscosity feature/advectionRV
Thu, 06 Dec 2018 17:03:22 +0100, by Vidar Stiernström
Add boot-strapping to RungeKuttaExteriorRV feature/advectionRV
Thu, 06 Dec 2018 11:30:47 +0100, by Vidar Stiernström
Draft implementation of RungeKutta with exterior RV updates feature/advectionRV
Wed, 05 Dec 2018 15:04:44 +0100, by Vidar Stiernström
Create residual viscosity package +rv and generalize the ResidualViscosity class feature/advectionRV
Wed, 05 Dec 2018 13:44:10 +0100, by Vidar Stiernström
Add todo:s for time stepping with RV feature/advectionRV
Thu, 15 Nov 2018 13:49:11 -0800, by Vidar Stiernström
Add 1D scheme for advection with RV feature/advectionRV
Wed, 07 Nov 2018 10:03:35 -0800, by Vidar Stiernström
Draft implementation of scheme for advection with RV feature/advectionRV
Wed, 31 Oct 2018 09:31:34 -0700, by Vidar Stiernström
First attempt at implementing Burgers in 2D with RV-stabilization feature/burgers2d
Fri, 12 Oct 2018 08:54:39 +0200, by Vidar Stiernström
Revert to old code in multiblock.DiffOp.getBoundaryOperator. feature/getBoundaryOp
Wed, 16 Jan 2019 11:31:04 -0800, by Martin Almquist
Merge with default feature/getBoundaryOp
Wed, 16 Jan 2019 16:50:47 +0100, by Jonatan Werpers
Remove misplaced error functions from +scheme
Wed, 16 Jan 2019 16:50:21 +0100, by Jonatan Werpers
Delete scheme.Wave2dCurve feature/getBoundaryOp
Wed, 16 Jan 2019 16:45:26 +0100, by Jonatan Werpers
Merge with default to remove scheme.Beam2d feature/getBoundaryOp
Wed, 16 Jan 2019 16:39:47 +0100, by Jonatan Werpers
Remove scheme.Beam2d.m
Wed, 16 Jan 2019 16:37:59 +0100, by Jonatan Werpers
Add getBoundaryOperator and getBoundaryQuadrature as abstract methods in scheme.Scheme feature/getBoundaryOp
Wed, 16 Jan 2019 16:35:01 +0100, by Jonatan Werpers
Merge with default feature/getBoundaryOp
Mon, 14 Jan 2019 11:12:42 -0800, by Martin Almquist
Fix overlooked Schrodinger1d scheme. feature/getBoundaryOp
Sat, 12 Jan 2019 13:44:08 -0800, by Martin Almquist
Add getBoundaryOperator to all 1d schemes. Did not add getBoundaryQuadrature because it doesnt make sense in 1d (?) feature/getBoundaryOp
Sat, 12 Jan 2019 13:35:19 -0800, by Martin Almquist
Add getBoundaryOperator method to all 2d schemes, except obsolete Wave2dCurve and ElastiCurve, which needs a big makeover. feature/getBoundaryOp
Sat, 12 Jan 2019 11:57:50 -0800, by Martin Almquist
Rename time.rk.General to time.rk.Explicit and fix some errors feature/timesteppers
Wed, 09 Jan 2019 23:01:17 +0100, by Jonatan Werpers
Full use of butcher tableau in time.rk.General. Inline rungekutta step methods feature/timesteppers
Wed, 09 Jan 2019 22:57:13 +0100, by Jonatan Werpers
Implement method to get gain from butcher tableu feature/timesteppers
Wed, 09 Jan 2019 12:14:30 +0100, by Jonatan Werpers
Make time.rk.General accept a butcher tableau instead of a string to choose method. String variant implemented as a static method feature/timesteppers
Wed, 09 Jan 2019 11:14:16 +0100, by Jonatan Werpers
Move time.Rungekutta to time.rk.General feature/timesteppers
Wed, 09 Jan 2019 10:59:38 +0100, by Jonatan Werpers
Make Rungekutta4SecondOrder native second order feature/timesteppers
Wed, 09 Jan 2019 10:17:00 +0100, by Jonatan Werpers
Create class for butcher tableau feature/timesteppers
Wed, 09 Jan 2019 09:09:15 +0100, by Jonatan Werpers
Merge with default feature/timesteppers
Wed, 09 Jan 2019 08:56:42 +0100, by Jonatan Werpers
Fix bug in assertSize where dimensions didn't have to match
Tue, 08 Jan 2019 15:00:12 +0100, by Jonatan Werpers
Add assertLength
Tue, 08 Jan 2019 14:59:43 +0100, by Jonatan Werpers
Rename butcherTableau() to butcherTableauFromStr() in preparation of butcher tableau class feature/timesteppers
Tue, 08 Jan 2019 13:28:41 +0100, by Jonatan Werpers
Convert Rungekutta4SecondOrder to take F(t,v,v_t) instead of matrices feature/timesteppers
Tue, 08 Jan 2019 12:34:29 +0100, by Jonatan Werpers
Inline the rk.rungekutta_4 function. feature/timesteppers
Tue, 08 Jan 2019 12:19:33 +0100, by Jonatan Werpers
Convert Rungekutta4 to take F(t,y) instead of a matrix feature/timesteppers
Tue, 08 Jan 2019 12:07:57 +0100, by Jonatan Werpers
Add the following methods in LaplaceCurvilinear: getBoundaryOperator, getBoundaryQuadrature, getBoundaryBorrowing. Remove get_boundary_ops. Make interface and boundary_condition methods use the new methods. feature/getBoundaryOp
Tue, 08 Jan 2019 11:51:24 +0100, by Martin Almquist
Update scheme.Elastic2dVariable by copy-pasting from feature/poroelastic. This is compatible with new getBoundaryOperator in multiblock.DiffOp. feature/getBoundaryOp
Mon, 07 Jan 2019 17:10:06 +0100, by Martin Almquist
Make mutliblock.DiffOp.getBoundaryOperator/Quadrature use scheme methods instead of properties. feature/getBoundaryOp
Mon, 07 Jan 2019 17:07:35 +0100, by Martin Almquist
Merge with default feature/timesteppers
Mon, 07 Jan 2019 16:26:00 +0100, by Jonatan Werpers
Refactor CdiffImplicit to take input arguments in the right order
Mon, 07 Jan 2019 16:15:49 +0100, by Jonatan Werpers
Refactor time.Cdiff and add getEnergyMethod
Mon, 07 Jan 2019 15:56:35 +0100, by Jonatan Werpers
Add getEnergy methods to CdiffImplicit
Mon, 07 Jan 2019 15:01:26 +0100, by Jonatan Werpers
Stupid merge makes this branch dangerous. Merging with other branches will result in unexpected changes. Never merge this branch with anything. Closing branch. feature/getBoundaryOperator
Thu, 03 Jan 2019 13:24:39 +0100, by Martin Almquist
Extract tuning from alpha. feature/poroelastic
Tue, 25 Dec 2018 16:39:06 +0100, by Martin Almquist
Remove unused properties in Elastic2dVariable feature/poroelastic
Tue, 25 Dec 2018 16:26:20 +0100, by Martin Almquist
Clean up Elastic2dVariable.interfaceStandard feature/poroelastic
Tue, 25 Dec 2018 08:33:35 +0100, by Martin Almquist
Merge with feature/poroelastic. Use only the changes made to multiblock.DiffOp and scheme.Elastic2dVariable. DiffOp.getBoundaryOperator/Quadrature now use scheme methods instead of propeties. feature/getBoundaryOperator
Tue, 25 Dec 2018 07:50:07 +0100, by Martin Almquist
Add getBoundaryQuadrature in Elastic2dVariable. Rename get_boundary_operator -> getBoundaryOperator. Add operators in getBoundaryOperator, with full size so that they work with multiblock.DiffOp.getBoundaryOperator. feature/poroelastic
Tue, 25 Dec 2018 07:23:38 +0100, by Martin Almquist
Remove silly getBoundaryOperator* methods in multiblock.DiffOp and make the getBoundaryOperator and getBoundaryQuadrature methods use the scheme.getBoundaryOperator/Quadrature methods instead of properties. feature/poroelastic
Tue, 25 Dec 2018 07:21:19 +0100, by Martin Almquist
Merge with default. feature/poroelastic
Sun, 23 Dec 2018 14:39:31 +0100, by Martin Almquist
Fix bug in Elastic2dVariable that resulted in using tuning^2 feature/poroelastic
Sun, 23 Dec 2018 14:06:26 +0100, by Martin Almquist
Fix bug in Elastic2dVariable that caused crash for m_x neq m_y feature/poroelastic
Sat, 22 Dec 2018 18:08:51 +0100, by Martin Almquist
Remove use of tensor library in B assembly feature/poroelastic
Sat, 22 Dec 2018 16:41:17 +0100, by Martin Almquist
Fix warning in getBoundaryWrapper methods feature/poroelastic
Wed, 19 Dec 2018 07:09:24 +0100, by Martin Almquist
Turn alpha into a boundary operator. Add properties H_w etc for getBoundaryQuadrature to work. feature/poroelastic
Wed, 19 Dec 2018 06:58:10 +0100, by Martin Almquist
Bugfix in multiblock.DiffOp/getBoundaryOperatorWrapper feature/poroelastic
Wed, 19 Dec 2018 06:54:47 +0100, by Martin Almquist
Make ElasticVariable2d.boundary_condition use get_boundary_operator for penalty strength. feature/poroelastic
Mon, 17 Dec 2018 21:07:59 -0800, by Martin Almquist
Add type to Elastic2dVariable.interface feature/poroelastic
Mon, 17 Dec 2018 20:06:50 -0800, by Martin Almquist
Bugfix in Elastic2dVariable.getBoundaryOps, alpha. Adjoint FD conv works now! feature/poroelastic
Wed, 05 Dec 2018 19:30:09 -0800, by Martin Almquist
Temporary changes in multiblock.DiffOp. Change traction operators in Elastic2dvariable to be true boundary operators. But adjoint FD conv test fails for dirichlet BC so need to debug! feature/poroelastic
Wed, 05 Dec 2018 18:58:10 -0800, by Martin Almquist
Add function for drawing arrow on plot
Wed, 12 Dec 2018 23:16:44 +0100, by Jonatan Werpers
Add todo in CdiffImplicit
Tue, 11 Dec 2018 11:21:25 +0100, by Jonatan Werpers
Merged in feature/utux2D (pull request #11)
Mon, 10 Dec 2018 08:29:41 +0000, by Jonatan Werpers
Close branch feature/utux2D feature/utux2D
Mon, 10 Dec 2018 08:29:41 +0000, by Jonatan Werpers
Merge default into feature/utux2D feature/utux2D
Mon, 10 Dec 2018 09:28:40 +0100, by Jonatan Werpers
Improve comments in InterpOpsXX feature/utux2D
Fri, 07 Dec 2018 11:10:31 -0800, by Martin Almquist
Better errors in Map()
Fri, 07 Dec 2018 16:10:58 +0100, by Jonatan Werpers
Rename *2D schemes to *2d feature/utux2D
Thu, 06 Dec 2018 10:32:02 +0100, by Jonatan Werpers
Remove half-commented switch in Utux. feature/utux2D
Wed, 05 Dec 2018 15:27:44 -0800, by Martin Almquist
Use assertType(...) instead of assert(isa(...)) feature/utux2D
Wed, 05 Dec 2018 16:08:48 +0100, by Jonatan Werpers
Add missing newline at end of file feature/utux2D
Wed, 05 Dec 2018 16:02:45 +0100, by Jonatan Werpers
Raname opts to type in a bunch of interface methods feature/utux2D
Wed, 05 Dec 2018 15:57:41 +0100, by Jonatan Werpers
Update abstract scheme class feature/utux2D
Wed, 05 Dec 2018 10:55:50 +0100, by Jonatan Werpers
Change from opts to type in a few schemes feature/utux2D
Wed, 05 Dec 2018 10:52:37 +0100, by Jonatan Werpers
Merge with default feature/utux2D
Tue, 04 Dec 2018 15:24:36 -0800, by Martin Almquist
Make Utux2D work with new interface type etc. feature/utux2D
Tue, 04 Dec 2018 14:54:28 -0800, by Martin Almquist
Remove empty line in Schrodinger2d feature/utux2D
Tue, 04 Dec 2018 14:51:23 -0800, by Martin Almquist
Add forgotten type argument in call to interfaceStandard in Schrodinger2d and LaplCurv. feature/utux2D
Tue, 04 Dec 2018 14:42:36 -0800, by Martin Almquist
Update Schrodinger2d to work with new interface types, similar to LaplCurv. feature/utux2D
Tue, 04 Dec 2018 14:25:03 -0800, by Martin Almquist
Make LaplCurv send only number of grid points to InterpOpsXX. Remove coordinates from get_boundary_ops method. feature/utux2D
Tue, 04 Dec 2018 14:07:38 -0800, by Martin Almquist
Use only number of grid points as arguments in InterpOpsXX, instead of coordinates. feature/utux2D
Tue, 04 Dec 2018 14:06:42 -0800, by Martin Almquist
Remove default values from LaplaceCurvilinear.interfaceStandard feature/utux2D
Tue, 04 Dec 2018 12:54:33 +0100, by Jonatan Werpers
Fix doc for LaplaceCurvilinear.interface feature/utux2D
Tue, 04 Dec 2018 12:53:59 +0100, by Jonatan Werpers
Change from opts to type in multiblock.setAllInterfaceTypes feature/utux2D
Tue, 04 Dec 2018 12:37:44 +0100, by Jonatan Werpers
Add methods timePoints and quadWeights to Rungekutta class. feature/timesteppers
Mon, 03 Dec 2018 16:49:43 -0800, by Martin Almquist
Remove unnecessary(?) arguments in Rungekutta.scheme. feature/timesteppers
Mon, 03 Dec 2018 16:33:27 -0800, by Martin Almquist
Make Rungekutta class allow for discrete data. feature/timesteppers
Mon, 03 Dec 2018 16:26:44 -0800, by Martin Almquist
Add stepping function for RK with discrete data. feature/timesteppers
Mon, 03 Dec 2018 16:26:18 -0800, by Martin Almquist
Improve error msg in rk.butcherTableau feature/timesteppers
Mon, 03 Dec 2018 15:40:26 -0800, by Martin Almquist
Replace opts by type everywhere feature/utux2D
Mon, 03 Dec 2018 15:01:24 -0800, by Martin Almquist
Rename AWW OP. Make Interpolation operator classes take grid points as arguments. Remove LaplCurv.interpolationOperators. Introduce default struct in LaplCurv.interface. feature/utux2D
Mon, 03 Dec 2018 14:53:52 -0800, by Martin Almquist
Make multiblock.setAllInterfaceOptions set opts only for those entries where grid.connections indicates interface couplings. feature/utux2D
Mon, 03 Dec 2018 12:02:27 -0800, by Martin Almquist
Bugfixes in LaplaceCurve feature/utux2D
Sun, 02 Dec 2018 18:04:33 -0800, by Martin Almquist
Add helper function multiblock.SetAllInterfaceOptions. feature/utux2D
Sun, 02 Dec 2018 17:25:08 -0800, by Martin Almquist
Remove interfaceOptions class feature/utux2D
Sun, 02 Dec 2018 17:19:48 -0800, by Martin Almquist
Refactor LaplCurv.interfaceNonConf. Add method for interpolation operator generation in LaplCurv feature/utux2D
Sun, 02 Dec 2018 17:10:07 -0800, by Martin Almquist
Add warning that interfaceNonConforming in LaplaceCurve only works for Cartesian grids. feature/utux2D
Sun, 02 Dec 2018 16:27:49 -0800, by Martin Almquist
Merge with default. feature/d1_staggered
Wed, 28 Nov 2018 17:35:19 -0800, by Martin Almquist
Bugfix in Elastic2dVariable.get_boundary_ops feature/poroelastic
Wed, 28 Nov 2018 14:04:31 -0800, by Martin Almquist
Add properties for stage approximations and stage rates in the Rungekutta class. feature/timesteppers
Mon, 26 Nov 2018 16:23:27 -0800, by Martin Almquist
Make time.rk.rungekutta return stage approximations and stage rates in addition to the solution after one time step. feature/timesteppers
Mon, 26 Nov 2018 16:12:27 -0800, by Martin Almquist
Add comment in butcherTableau about rk4-3/8 being irreducible. feature/timesteppers
Mon, 26 Nov 2018 16:08:54 -0800, by Martin Almquist
Clean up default_field feature/utux2D
Mon, 26 Nov 2018 10:00:05 +0100, by Jonatan Werpers
Make default_field overwrite if field exists but is empty. Refactor interface method in Utux2d. feature/utux2D
Sun, 25 Nov 2018 21:09:22 -0800, by Martin Almquist
Bugfix in nonConformingInterfaceOptions feature/utux2D
Sun, 25 Nov 2018 21:08:55 -0800, by Martin Almquist
Refactor interface method for Schrodinger2d feature/utux2D
Sun, 25 Nov 2018 19:46:39 -0800, by Martin Almquist
Improve comments and names. Change InterfaceOptions.union to merge. feature/utux2D
Sat, 24 Nov 2018 15:43:34 -0800, by Martin Almquist
Change the name of the last interface method argument from type to opts in all schemes. feature/utux2D
Fri, 23 Nov 2018 20:39:40 -0800, by Martin Almquist
Bugfix in InterfaceOptions.setOption feature/utux2D
Fri, 23 Nov 2018 20:21:28 -0800, by Martin Almquist
Add helper function nonConformingInterfaceOptions that creates an InterfaceOptions object that specifies which interpolation operators are used where. feature/utux2D
Fri, 23 Nov 2018 20:14:16 -0800, by Martin Almquist
Add new class multiblock.InterfaceOptions whose instances are passed to multiblock.DiffOp. feature/utux2D
Fri, 23 Nov 2018 20:12:54 -0800, by Martin Almquist
Remove property interpolation_type in LaplaceCurvilinear feature/utux2D
Fri, 23 Nov 2018 20:07:13 -0800, by Martin Almquist
Include type as (optional) input parameter in the interface method of all schemes. feature/utux2D
Thu, 22 Nov 2018 22:03:44 -0800, by Martin Almquist
Outline new interface method in LaplaceCurvilinear feature/utux2D
Thu, 22 Nov 2018 22:03:06 -0800, by Martin Almquist
Include interface type in multiblock.DiffOp, passed to all scheme.interface methods. feature/utux2D
Thu, 22 Nov 2018 22:01:58 -0800, by Martin Almquist
Merged in bcSetupExperiment (pull request #10)
Sat, 24 Nov 2018 14:55:48 +0000, by Jonatan Werpers
Close branch bcSetupExperiment bcSetupExperiment
Sat, 24 Nov 2018 14:55:48 +0000, by Jonatan Werpers
Merge with default bcSetupExperiment
Sat, 24 Nov 2018 15:52:47 +0100, by Jonatan Werpers
Fix the documentation of functions bcSetupExperiment
Sat, 24 Nov 2018 15:48:00 +0100, by Jonatan Werpers
Mordernize Laplace1d
Thu, 22 Nov 2018 10:44:11 +0100, by Jonatan Werpers
Fix bug in bcSetup
Thu, 22 Nov 2018 10:43:48 +0100, by Jonatan Werpers
Rename and mordernize scheme.Wave to scheme.Laplace1d. Not fully converted
Thu, 22 Nov 2018 07:58:11 +0100, by Jonatan Werpers
Merge with default bcSetupExperiment
Thu, 22 Nov 2018 07:31:42 +0100, by Jonatan Werpers
Add new formatting method to TextTable
Thu, 22 Nov 2018 07:29:30 +0100, by Jonatan Werpers
Add a stuffStruct(), the reverse of dealStruct()
Thu, 22 Nov 2018 07:27:11 +0100, by Jonatan Werpers
Handle default arguments better in dealStruct()
Thu, 22 Nov 2018 07:26:45 +0100, by Jonatan Werpers
Add function to get the hgRevision hash as a string
Thu, 22 Nov 2018 07:25:52 +0100, by Jonatan Werpers
Merge with feature/poroelastic. feature/d1_staggered
Wed, 21 Nov 2018 18:29:29 -0800, by Martin Almquist
Remove getState from TimeStepper and derived classes feature/timesteppers
Thu, 15 Nov 2018 17:29:30 -0800, by Vidar Stiernström
Add general Runge-Kutta class feature/timesteppers
Thu, 15 Nov 2018 17:10:01 -0800, by Vidar Stiernström
Rename package rk4 to rk feature/timesteppers
Thu, 15 Nov 2018 16:42:58 -0800, by Vidar Stiernström
Merge with default for latest changes feature/timesteppers
Thu, 15 Nov 2018 16:36:21 -0800, by Vidar Stiernström
Generalize Staggered1DAcoustics to handle variable coefficients defined by both function handles and vectors. feature/d1_staggered
Sun, 04 Nov 2018 12:36:30 -0800, by Martin Almquist
Add a getBoundaryOperator method in multiblock.DiffOp that uses the the diffop get_boundary_operator method rather than its properties. Werpers might not like this. feature/poroelastic
Fri, 02 Nov 2018 10:47:03 -0700, by Martin Almquist
Add Jonatans bugfix to bcSetup. feature/poroelastic
Fri, 02 Nov 2018 10:44:59 -0700, by Martin Almquist
In Elastic2dVariable: Improve notation for borrowing constants. Update interface constant to match corrected derivation. Tests ok. feature/poroelastic
Fri, 26 Oct 2018 16:35:23 -0700, by Martin Almquist
Add method expandFunc to multiblock.Grid feature/poroelastic
Fri, 26 Oct 2018 15:41:26 -0700, by Martin Almquist
Merge with default bcSetupExperiment
Fri, 02 Nov 2018 11:14:06 +0100, by Jonatan Werpers
Fix typo in boundary group definition in multiblock.domain.Circle
Fri, 02 Nov 2018 11:13:51 +0100, by Jonatan Werpers
Fix bugs in forcingSetup and verifyFormat bcSetupExperiment
Fri, 02 Nov 2018 11:11:50 +0100, by Jonatan Werpers
Clean up bc.forcingSetup bcSetupExperiment
Thu, 01 Nov 2018 16:01:33 +0100, by Jonatan Werpers
Merge with default bcSetupExperiment
Thu, 01 Nov 2018 15:36:19 +0100, by Jonatan Werpers
Add grid for just a collection of nodes
Thu, 01 Nov 2018 14:10:47 +0100, by Jonatan Werpers
Add function to deal the fields of a struct to variables
Thu, 01 Nov 2018 14:10:02 +0100, by Jonatan Werpers
Clean up closureSetup bcSetupExperiment
Thu, 01 Nov 2018 12:05:53 +0100, by Jonatan Werpers
Clean up verifyFormat bcSetupExperiment
Thu, 01 Nov 2018 12:02:25 +0100, by Jonatan Werpers
Clean up notes bcSetupExperiment
Thu, 01 Nov 2018 11:41:03 +0100, by Jonatan Werpers
Change some naming of functions bcSetupExperiment
Thu, 01 Nov 2018 10:41:36 +0100, by Jonatan Werpers
Start organizing the code bcSetupExperiment
Fri, 07 Sep 2018 09:19:03 +0200, by Jonatan Werpers
Merge with feature/grids bcSetupExperiment
Fri, 27 Jul 2018 10:39:12 -0700, by Jonatan Werpers
More notes bcSetupExperiment
Thu, 26 Jul 2018 17:28:48 -0700, by Jonatan Werpers
Merge with feature/grids bcSetupExperiment
Thu, 26 Jul 2018 09:27:17 -0700, by Jonatan Werpers
Use existing functions bcSetupExperiment
Wed, 25 Jul 2018 15:43:26 -0700, by Jonatan Werpers
Add functions for taking local closures and penalties global bcSetupExperiment
Wed, 25 Jul 2018 15:24:37 -0700, by Jonatan Werpers
Merge with feature/grids bcSetupExperiment
Wed, 25 Jul 2018 15:17:47 -0700, by Jonatan Werpers
I remove cell support in multiblock.DiffOp.boundary_condition bcSetupExperiment
Wed, 25 Jul 2018 15:17:16 -0700, by Jonatan Werpers
Small changes to Elastic2dVariable to facilitate adjoing gradient computation. feature/poroelastic
Wed, 24 Oct 2018 16:17:32 -0700, by Martin Almquist
Add computation of HI*M to D2Variable to make adjoint gradient computation easier. feature/poroelastic
Wed, 24 Oct 2018 16:16:43 -0700, by Martin Almquist
Add method getTimeStepQuadrature to RungeKuttaDiscreteData feature/poroelastic
Wed, 03 Oct 2018 10:43:24 -0700, by Martin Almquist
Add RK for second order and discrete data. feature/poroelastic
Tue, 02 Oct 2018 13:43:33 -0700, by Martin Almquist
Bugfix in static getTimeStep method in RungeKuttaDiscreteData feature/poroelastic
Tue, 02 Oct 2018 13:42:11 -0700, by Martin Almquist
Merge with feature/d1_staggered to get RK timestepper for discrete data. feature/poroelastic
Tue, 02 Oct 2018 13:39:10 -0700, by Martin Almquist
Add 1D quadrature matrices as property in Elastic2dVariable. feature/poroelastic
Sun, 16 Sep 2018 18:00:14 -0700, by Martin Almquist
Merged branch with default for latest change set feature/burgers1d
Fri, 12 Oct 2018 08:50:25 +0200, by Vidar Stiernström
Minor renaming and clean up feature/burgers1d
Fri, 12 Oct 2018 08:41:57 +0200, by Vidar Stiernström
Fix bug in SAT terms for upwind operators feature/burgers1d
Thu, 27 Sep 2018 09:30:21 +0200, by Vidar Stiernström
- Fix bug when constructing closure for narrow stencils feature/burgers1d
Fri, 21 Sep 2018 15:33:15 +0200, by Vidar Stiernström
Correct documentation of Rungekutta feature/burgers1d
Fri, 21 Sep 2018 09:14:38 +0200, by Vidar Stiernström
Use the old implementation for RK4 until the different methods are profiled. feature/burgers1d
Fri, 21 Sep 2018 09:13:03 +0200, by Vidar Stiernström
Increase efficiency of computing closures feature/burgers1d
Thu, 20 Sep 2018 19:02:01 +0200, by Vidar Stiernström
Clean up in RK time stepper schemes feature/burgers1d
Thu, 20 Sep 2018 18:36:45 +0200, by Vidar Stiernström
Add generalized RungeKutta and RungeKuttaRV class which extracts its coefficients from a butcher tableau, specified on the scheme. feature/burgers1d
Thu, 20 Sep 2018 17:51:19 +0200, by Vidar Stiernström
Add RK6 with residual viscosity update and reduce computational effort of spatial scheme feature/burgers1d
Wed, 19 Sep 2018 16:32:05 +0200, by Vidar Stiernström
Only compute dissipation operator when requested feature/burgers1d
Tue, 18 Sep 2018 10:32:00 +0200, by Vidar Stiernström
Minor rewrite of RK4RV feature/burgers1d
Mon, 17 Sep 2018 11:08:23 +0200, by Vidar Stiernström
Reformulate the RK4 time stages in order to easier see how the residual should be updated. feature/burgers1d
Fri, 14 Sep 2018 16:40:19 +0200, by Vidar Stiernström
Fix bug in +scheme.bcSetup
Thu, 20 Sep 2018 11:45:40 +0200, by Jonatan Werpers
Close feature/grids after merge to default feature/grids
Tue, 18 Sep 2018 15:58:12 +0200, by Jonatan Werpers
Add license file and a short readme
Tue, 18 Sep 2018 15:48:36 +0200, by Jonatan Werpers
Added tag Heimisson2018 for changeset 08f3ffe63f48 feature/poroelastic
Fri, 14 Sep 2018 10:41:00 -0700, by Martin Almquist
Make diracDiscr work for n dimensions. Add tests up to 3D. feature/poroelastic
Wed, 05 Sep 2018 18:09:18 -0700, by Martin Almquist
Add dirac delta function, with corresponding test. Commented out tests for staggered grid because they do not yet exist on this branch. feature/poroelastic
Wed, 05 Sep 2018 14:46:39 -0700, by Martin Almquist
Compute the residual in between each runge-kutta stage. feature/burgers1d
Thu, 13 Sep 2018 18:14:54 +0200, by Vidar Stiernström
Add support for artificial viscosity feature/burgers1d
Thu, 13 Sep 2018 14:21:47 +0200, by Vidar Stiernström
Support narrow stencil operators of order 6 feature/burgers1d
Tue, 11 Sep 2018 16:29:00 +0200, by Vidar Stiernström
Merged with default, and updated +scheme/Burgers1D accordingly feature/burgers1d
Tue, 11 Sep 2018 15:58:35 +0200, by Vidar Stiernström
Fix bug in initialization of differential operators feature/burgers1d
Tue, 11 Sep 2018 13:24:08 +0200, by Vidar Stiernström
Add quadrature stencils and operator assembly. Add tests feature/operator_files
Mon, 10 Sep 2018 19:27:27 +0200, by Vidar Stiernström
Add D2 files feature/operator_files
Mon, 10 Sep 2018 19:25:41 +0200, by Ylva Rydin
Fixed bug in tests feature/operator_files
Mon, 10 Sep 2018 19:17:41 +0200, by Ylva Rydin
add testfor D2 and sign in assemble_op feature/operator_files
Mon, 10 Sep 2018 18:50:29 +0200, by Ylva Rydin
rename d2_2 to D1_standard_2 feature/operator_files
Mon, 10 Sep 2018 17:48:48 +0200, by Ylva Rydin
Add test and fix typo feature/operator_files
Mon, 10 Sep 2018 17:42:30 +0200, by Ylva Rydin
fix bug in assemble_D1 feature/operator_files
Mon, 10 Sep 2018 17:31:42 +0200, by Ylva Rydin
rename boundart_stencil and and boundary_block to boundary_stencils feature/operator_files
Mon, 10 Sep 2018 17:28:15 +0200, by Ylva Rydin
Add assemble_boundary_op feature/operator_files
Mon, 10 Sep 2018 17:16:22 +0200, by Ylva Rydin
Add files for parsing operator data stencil file feature/operator_files
Mon, 10 Sep 2018 16:57:17 +0200, by Ylva Rydin
Merge with feature/grids
Fri, 07 Sep 2018 14:40:58 +0200, by Jonatan Werpers
Added tag v0.2 for changeset b723495cdb2f
Fri, 07 Sep 2018 14:39:38 +0200, by Jonatan Werpers
Merge with default feature/grids
Fri, 07 Sep 2018 09:22:53 +0200, by Jonatan Werpers
Add functions for easily creating struct arrays and struct cell arrays v0.2
Fri, 07 Sep 2018 09:21:57 +0200, by Jonatan Werpers
Add getState to timesteppers, returning the relevant state of the timestepper feature/timesteppers
Mon, 10 Sep 2018 16:19:16 +0200, by Vidar Stiernström
Add support for artificial viscosity to the 1d burgers scheme. feature/burgers1d
Thu, 06 Sep 2018 12:43:51 +0200, by Vidar Stiernstrom
Add scheme for 1D Burgers equation feature/burgers1d
Mon, 03 Sep 2018 14:50:27 +0200, by Vidar Stiernstrom
Correct interface penalty strength in Elastic2dVariable feature/grids
Wed, 08 Aug 2018 14:42:24 -0700, by Martin Almquist
Merge with feature/poroelastic feature/grids
Fri, 27 Jul 2018 10:31:51 -0700, by Martin Almquist
Close branch before merge feature/poroelastic
Fri, 27 Jul 2018 10:30:49 -0700, by Martin Almquist
Bugfix in grid/evalOn feature/poroelastic
Fri, 27 Jul 2018 10:23:49 -0700, by Martin Almquist
Allow functions with variable number of arguments in grid.evalOn feature/poroelastic
Fri, 27 Jul 2018 10:13:02 -0700, by Jonatan Werpers
Make multiblock.evalOn work for any dimension feature/poroelastic
Fri, 27 Jul 2018 10:03:21 -0700, by Jonatan Werpers
Change order of function arguments feature/poroelastic
Fri, 27 Jul 2018 09:50:29 -0700, by Jonatan Werpers
Add type assertions, fix bug, edit documentation and formatting feature/poroelastic
Fri, 27 Jul 2018 09:49:24 -0700, by Jonatan Werpers
Fix formatting of multiblock.evalOn feature/poroelastic
Thu, 26 Jul 2018 18:34:38 -0700, by Jonatan Werpers
Move blockEvalOn to multiblock package feature/poroelastic
Thu, 26 Jul 2018 18:33:01 -0700, by Jonatan Werpers
Add values to .lim in Cartesian feature/poroelastic
Thu, 26 Jul 2018 18:25:10 -0700, by Jonatan Werpers
Merge with feature/grids feature/poroelastic
Thu, 26 Jul 2018 18:05:29 -0700, by Jonatan Werpers
Rename spdaigsVariablePeriodic spdiagsPeriodic feature/poroelastic
Thu, 26 Jul 2018 18:04:29 -0700, by Jonatan Werpers
Make spdiagVariable a local functions feature/poroelastic
Thu, 26 Jul 2018 17:53:51 -0700, by Jonatan Werpers
Bort med martins hemska whitespace feature/poroelastic
Thu, 26 Jul 2018 17:51:48 -0700, by Jonatan Werpers
Fix bug in spdiag feature/grids
Thu, 26 Jul 2018 17:47:21 -0700, by Jonatan Werpers
Merge with feature/grids and bugfix bcSetup feature/poroelastic
Thu, 26 Jul 2018 10:53:05 -0700, by Martin Almquist
Remove hack in multiblock/DiffOp that was used with cell penalties. feature/poroelastic
Wed, 25 Jul 2018 18:53:07 -0700, by Martin Almquist
Revert bcSetup and update bc functions in elastic schemes to be compatible. feature/poroelastic
Wed, 25 Jul 2018 18:33:03 -0700, by Martin Almquist
Added tag elastic1.0 for changeset 08f3ffe63f48 feature/poroelastic
Wed, 25 Jul 2018 18:06:08 -0700, by Martin Almquist
Remove old functions from multiblock package feature/grids
Wed, 25 Jul 2018 18:36:57 -0700, by Jonatan Werpers
Add some notes bcSetupExperiment
Wed, 25 Jul 2018 09:34:51 -0700, by Jonatan Werpers
Merge with bcSetupExperiment feature/grids
Wed, 25 Jul 2018 09:38:06 -0700, by Jonatan Werpers
Add function for parsing each entry in bcs to a struct bcSetupExperiment
Wed, 25 Jul 2018 09:34:19 -0700, by Jonatan Werpers
Change to using structs for storing data functions and penalties bcSetupExperiment
Tue, 24 Jul 2018 16:53:35 -0700, by Jonatan Werpers
Remove some stuff duplicated from the verifyFormat function bcSetupExperiment
Tue, 24 Jul 2018 16:30:15 -0700, by Jonatan Werpers
Move more stuff into verifyFormat bcSetupExperiment
Tue, 24 Jul 2018 16:27:36 -0700, by Jonatan Werpers
Move verification to a separate function bcSetupExperiment
Tue, 24 Jul 2018 16:12:39 -0700, by Jonatan Werpers
Change name from bc to bcs bcSetupExperiment
Tue, 24 Jul 2018 15:55:45 -0700, by Jonatan Werpers
Merge with feature/interpolation feature/grids
Tue, 24 Jul 2018 20:17:25 -0700, by Jonatan Werpers
Close branch before merge feature/interpolation
Tue, 24 Jul 2018 20:16:38 -0700, by Jonatan Werpers
Add assertions on string input accOp feature/interpolation
Tue, 24 Jul 2018 20:16:00 -0700, by Jonatan Werpers
Merge with feature/grids feature/interpolation
Tue, 24 Jul 2018 20:14:29 -0700, by Jonatan Werpers
Merge with feature/better_multiblock_defs feature/grids
Tue, 24 Jul 2018 20:01:29 -0700, by Jonatan Werpers
Close branch before merge feature/better_multiblock_defs
Tue, 24 Jul 2018 19:59:54 -0700, by Jonatan Werpers
Added tag grids0.1 for changeset 0776fa4754ff feature/grids
Tue, 24 Jul 2018 19:58:53 -0700, by Jonatan Werpers
Switch to assertSize from assert_size feature/grids grids0.1
Mon, 23 Jul 2018 09:33:26 -0700, by Jonatan Werpers
Remove multiplication with jacobian where it shouldn't be feature/grids
Mon, 23 Jul 2018 09:32:56 -0700, by Jonatan Werpers
Add a few assert functions feature/grids
Thu, 19 Jul 2018 09:40:05 -0700, by Jonatan Werpers
Remove default scaling of the system. feature/grids
Wed, 18 Jul 2018 15:42:52 -0700, by Jonatan Werpers
Return line handles from show methods in Def and Ti feature/grids
Wed, 18 Jul 2018 15:26:15 -0700, by Jonatan Werpers
Fix bug in +multiblock/Def feature/grids
Wed, 18 Jul 2018 11:26:10 -0700, by Jonatan Werpers
Make setup_time_quantity_plot() accept sparse vectors feature/grids
Tue, 17 Jul 2018 16:39:17 -0700, by Jonatan Werpers
Improve mononomial and vandermonde functions to work in multiple dimension and adapt to sym or double inputs feature/grids
Wed, 27 Jun 2018 11:10:52 +0200, by Jonatan Werpers
Add function to find next color of a plot feature/grids
Tue, 26 Jun 2018 16:59:03 +0200, by Jonatan Werpers
Make assertSize more general, allow picking dimensions feature/grids
Tue, 26 Jun 2018 14:07:35 +0200, by Jonatan Werpers
Simplify assertSize feature/grids
Tue, 26 Jun 2018 14:02:31 +0200, by Jonatan Werpers
Rename assert_size to assertSize feature/grids
Tue, 26 Jun 2018 13:57:15 +0200, by Jonatan Werpers
Add function for findind indecies of points in a list of points feature/grids
Thu, 21 Jun 2018 16:54:27 +0200, by Jonatan Werpers
Add methods for getting boundary quadratures from multiblock.DiffOP feature/grids
Wed, 20 Jun 2018 13:00:01 +0200, by Jonatan Werpers
time.SBPInTimeSecondOrderFormImplicit: Fix default value for A feature/grids
Wed, 20 Jun 2018 12:59:07 +0200, by Jonatan Werpers
Revert unnecessary change in bcSetup.m feature/d1_staggered
Tue, 19 Jun 2018 14:25:43 -0700, by Martin Almquist
Add discont interface in 1D acoustics staggered, using the hat variable interface coupling. feature/d1_staggered
Mon, 18 Jun 2018 16:36:24 -0700, by Martin Almquist
Add +multiblock/+domain/Line for 1D multiblock. feature/d1_staggered
Mon, 18 Jun 2018 16:33:53 -0700, by Martin Almquist
Bugfix? in +scheme/bcSetup.m feature/d1_staggered
Mon, 18 Jun 2018 16:32:23 -0700, by Martin Almquist
Merge with feature grids. feature/d1_staggered
Sun, 17 Jun 2018 15:29:46 -0700, by Martin Almquist
Merge with poroelastic to get blockEvalOn. feature/d1_staggered
Sun, 17 Jun 2018 14:44:05 -0700, by Martin Almquist
Merge with feature/utux2d. feature/d1_staggered
Sat, 16 Jun 2018 14:30:45 -0700, by Martin Almquist
Merge with feature/grids feature/d1_staggered
Fri, 15 Jun 2018 18:10:26 -0700, by Martin Almquist
Bugfix diracDiscr to make it work for grids that are non-equidistant near boundaries. feature/d1_staggered
Fri, 15 Jun 2018 14:01:13 -0700, by Martin Almquist
Fix stage rate bug in RK4 discrete data feature/d1_staggered
Fri, 15 Jun 2018 13:02:29 -0700, by Martin Almquist
Merge with feature/interpolation to get new interpolation operators. feature/utux2D
Tue, 22 May 2018 13:31:09 -0700, by Martin Almquist
Replace AWW interpolation operator coefficients by new that were generated symbolically feature/interpolation
Tue, 22 May 2018 13:29:47 -0700, by Martin Almquist
Add missing semicolon in multiblock.Laplace feature/grids
Mon, 04 Jun 2018 17:48:19 +0200, by Jonatan Werpers
Allow gird functions as data in bcSetup feature/grids
Mon, 04 Jun 2018 17:47:32 +0200, by Jonatan Werpers
Add a multiblock wrapper for laplace feature/grids
Thu, 24 May 2018 16:40:12 +0200, by Jonatan Werpers
Fix bug that fail tests and correct a typo feature/grids
Wed, 11 Apr 2018 09:14:54 +0200, by Jonatan Werpers
Add file that was forgotten. feature/grids
Wed, 28 Mar 2018 12:51:05 +0200, by Jonatan Werpers
Fix bug in draw.promprt_point() feature/grids
Wed, 28 Mar 2018 12:50:06 +0200, by Jonatan Werpers
SBPInTimeSecondOrderForm: Scale the system acording to C by default feature/grids
Wed, 28 Mar 2018 12:47:53 +0200, by Jonatan Werpers
Change schemes to work for special coefficients. feature/utux2D
Mon, 21 May 2018 23:11:34 -0700, by Martin Almquist
Add metric scale factors to properties in heat and elastic curvilinear feature/poroelastic Heimisson2018 elastic1.0
Fri, 11 May 2018 13:11:32 -0700, by Martin Almquist
Add scheme Heat2Dcurvilinear. Neumann and Dirichlet seem to work. Only tested for stretched Cartesian grids though. feature/poroelastic
Wed, 09 May 2018 19:29:12 -0700, by Martin Almquist
Make computation of metric derivatives work for periodic. feature/poroelastic
Mon, 07 May 2018 15:55:35 -0700, by Martin Almquist
Add Elastic curvilinear. Traction and Dirichlet BC working. feature/poroelastic
Mon, 07 May 2018 14:35:54 -0700, by Martin Almquist
Set Dirichlet tuning as parameter in BC function in Elastic2dVariable. feature/poroelastic
Tue, 01 May 2018 14:19:08 -0700, by Martin Almquist
Update Runge Kutta for discrete data to return stage rates if needed. feature/d1_staggered
Wed, 25 Apr 2018 16:58:45 -0700, by Martin Almquist
Add grid.blockEvalOn for functions with different functional expressions for different grid blocks feature/poroelastic
Wed, 25 Apr 2018 14:56:17 -0700, by Martin Almquist
Make bcSetup work for cell penalties and data from several BC per boundary. Should probably be changed before merge. feature/poroelastic
Wed, 25 Apr 2018 14:47:54 -0700, by Martin Almquist
Make Elastic2dVariable.size account for components. feature/poroelastic
Wed, 25 Apr 2018 14:46:24 -0700, by Martin Almquist
Bugfix in multiblock.Grid.splitFunc, didnt work for vector-valued functions. feature/poroelastic
Wed, 25 Apr 2018 14:44:49 -0700, by Martin Almquist
Set grid property in multiblock.DiffOp feature/poroelastic
Wed, 25 Apr 2018 14:43:58 -0700, by Martin Almquist
Hack in multiblockDiffOp, probably not Werpers-compatible. feature/poroelastic
Sat, 21 Apr 2018 16:08:48 -0700, by Martin Almquist
Bugfix Elastic2dVariable interface feature/poroelastic
Sat, 21 Apr 2018 16:04:46 -0700, by Martin Almquist
Update multiblock.DiffOp to work for systems. feature/poroelastic
Fri, 20 Apr 2018 16:56:49 -0700, by Martin Almquist
Merge with multiblock defs feature/poroelastic
Fri, 20 Apr 2018 12:06:38 -0700, by Martin Almquist
First implementation of elastic interface feature/poroelastic
Fri, 20 Apr 2018 11:32:04 -0700, by Martin Almquist
Refactor BC code in Elastic2dVariable feature/poroelastic
Thu, 19 Apr 2018 17:06:27 -0700, by Martin Almquist
Implement symmetric Dirichlet BC with variable tuning parameter in Heat2D scheme. feature/poroelastic
Fri, 30 Mar 2018 15:35:46 -0700, by Martin Almquist
Modify penalty for Neumann in Head2d so that data is for normal derivative and not u_x or u_y. feature/poroelastic
Wed, 14 Mar 2018 13:04:25 -0700, by Martin Almquist
Fix bug in bcSetup for inhom conditions feature/grids
Tue, 20 Mar 2018 14:43:04 +0100, by Jonatan Werpers
Add missing assignment of obj.grid in multiblock.DiffOp feature/grids
Mon, 19 Mar 2018 17:12:08 +0100, by Jonatan Werpers
Change name of grid parameter in multiblock.DiffOp to avoid conflict with package feature/grids
Mon, 19 Mar 2018 17:11:15 +0100, by Jonatan Werpers
Add interpolation to LaplaceCurveilinear. feature/utux2D
Wed, 14 Mar 2018 21:01:34 -0700, by Martin Almquist
Add interpolation to Schrödinger 2D scheme. feature/utux2D
Sun, 11 Mar 2018 21:39:49 -0700, by Martin Almquist
Add Schrödinger scheme for 2d single block. Will develop to multiblock with interpolation. feature/utux2D
Sat, 03 Mar 2018 16:18:33 -0800, by Martin Almquist
Merge with feature/poroelastic feature/utux2D
Sat, 03 Mar 2018 14:58:21 -0800, by Martin Almquist
Close branch feature/subclassable_cellarray feature/sublassable_cellarray
Tue, 08 Aug 2017 08:31:45 +0200, by Jonatan Werpers
Close branch feature/boundaryGroup feature/boundaryGroup
Tue, 08 Aug 2017 08:32:42 +0200, by Jonatan Werpers
closing feature/optim feature/optim
Thu, 08 Mar 2018 09:42:49 +0100, by Ylva Rydin
Merge with feature/frids feature/quantumTriangles
Tue, 20 Feb 2018 15:00:30 +0100, by Ylva Rydin
changed Animate beck feature/quantumTriangles
Tue, 20 Feb 2018 14:58:26 +0100, by Ylva Rydin
Changed closure and penalty ao that sparse matrices are created in DiffOpTimeDep feature/quantumTriangles
Thu, 30 Nov 2017 18:01:21 +0100, by Ylva Rydin
Remove stubid print-out feature/quantumTriangles
Tue, 21 Nov 2017 18:12:00 +0100, by Ylva Rydin
changed a sign in penalty and closure, most probably everything blows up now... feature/quantumTriangles
Tue, 21 Nov 2017 17:04:07 +0100, by Ylva Rydin
fixed error in diffOp feature/quantumTriangles
Tue, 21 Nov 2017 16:51:51 +0100, by Ylva Rydin
merge with feature/optim feature/quantumTriangles
Fri, 10 Nov 2017 14:22:56 +0100, by Ylva Rydin
add arnoldi feature/optim
Mon, 06 Nov 2017 11:42:15 +0100, by Ylva Rydin
Add diffOp time Dep feature/optim
Mon, 06 Nov 2017 11:39:59 +0100, by Ylva Rydin
merg with featuew grids feature/optim
Fri, 03 Nov 2017 10:53:15 +0100, by Ylva Rydin
megre with default feature/optim
Fri, 03 Nov 2017 10:43:27 +0100, by Ylva Rydin
changed penalty feature/optim
Fri, 20 Oct 2017 09:43:07 +0200, by Ylva Rydin
add imaginary part to closure in hamiltonian feature/optim
Thu, 19 Oct 2017 09:48:18 +0200, by Ylva Rydin
add hamiltonian closures feature/optim
Mon, 16 Oct 2017 16:51:22 +0200, by Ylva Rydin
sign change on hamiltonian feature/optim
Mon, 16 Oct 2017 14:52:15 +0200, by Ylva Rydin
Add hamiltonian feature/optim
Fri, 13 Oct 2017 09:16:33 +0200, by Ylva Rydin
1 objective optimization finished feature/optim
Fri, 06 Oct 2017 13:51:21 +0200, by Ylva Rydin
Add Jonatans symbolic lifehax feature/quantumTriangles
Thu, 05 Oct 2017 18:04:23 +0200, by Ylva Rydin
Changed jacobian at right side of the penalty term in 2D, seems like it is working feature/quantumTriangles
Tue, 19 Sep 2017 09:51:08 +0200, by Ylva Rydin
Add oposit jacobian to penalty term feature/quantumTriangles
Tue, 19 Sep 2017 09:47:14 +0200, by Ylva Rydin
changed my mond about the jacobian feature/quantumTriangles
Fri, 15 Sep 2017 09:24:21 +0200, by Ylva Rydin
added jacobian to stichshemes feature/quantumTriangles
Fri, 15 Sep 2017 09:21:29 +0200, by Ylva Rydin
Merge with default feature/quantumTriangles
Thu, 14 Sep 2017 16:00:36 +0200, by Ylva Rydin
Implement RK4 for discrete data. feature/d1_staggered
Tue, 06 Mar 2018 11:59:43 -0800, by Martin Almquist
Bugfix get_boundary_op in Elastic2d and Heat2d feature/poroelastic
Thu, 15 Feb 2018 16:38:36 -0800, by Martin Almquist
Add scheme Heat2dVariable feature/poroelastic
Mon, 12 Feb 2018 13:39:39 -0800, by Martin Almquist
Rename elastic scheme. feature/poroelastic
Fri, 09 Feb 2018 13:34:27 -0800, by Martin Almquist
Add D2VariablePeriodic orders 4 and 6. feature/poroelastic
Thu, 08 Feb 2018 16:44:46 -0800, by Martin Almquist
Make scheme/elasticVariable work with different opSets in different dim to facilitate periodic in some dim. feature/poroelastic
Thu, 08 Feb 2018 16:43:43 -0800, by Martin Almquist
Add property lim to grid/Cartesian to make periodic discr easier. feature/poroelastic
Thu, 08 Feb 2018 16:40:48 -0800, by Martin Almquist
Bugfix in spdiagsVariablePeriodic feature/poroelastic
Thu, 08 Feb 2018 16:02:20 -0800, by Martin Almquist
Modify BC in Staggered 1D acoustics to ensure that only physically meaningful changes of variables are used. See hypsyst varcoeff sec 3. feature/d1_staggered
Wed, 07 Feb 2018 20:07:34 -0800, by Martin Almquist
Add D2 variable periodic for second order. feature/poroelastic
Wed, 07 Feb 2018 15:42:50 -0800, by Martin Almquist
Remove schemes elasticDilation and elasticShear because they are subsets of elastic. feature/poroelastic
Mon, 05 Feb 2018 14:58:48 -0800, by Martin Almquist
Add support for Dirichlet and Traction BC on different components at the same boundary. Remove some unused variables and improve comments. feature/poroelastic
Mon, 05 Feb 2018 14:45:26 -0800, by Martin Almquist
Add scheme for complete elastic operator. Traction BC working with MMS variable coefficient. feature/poroelastic
Mon, 05 Feb 2018 11:06:15 -0800, by Martin Almquist
Correct factor of 2 in Dirichlet penalty parameter. feature/poroelastic
Fri, 26 Jan 2018 15:17:49 -0800, by Martin Almquist
Clean up dilation BC code. feature/poroelastic
Thu, 18 Jan 2018 14:36:59 -0800, by Martin Almquist
Add Dirichlet BC to dilation. Stable with variable coeff and conv study yields p+1/2 which probably is ok. feature/poroelastic
Thu, 18 Jan 2018 13:36:56 -0800, by Martin Almquist
First implementation of elastic dilation variable. Constant coeff is stable. feature/poroelastic
Tue, 16 Jan 2018 17:41:55 -0800, by Martin Almquist
Change penalties in Free BC to enable mixed Dirichlet/Free BC. feature/poroelastic
Sat, 23 Dec 2017 15:42:11 +0100, by Martin Almquist
Correct char BC in staggered acoustics 1D variable coeff. feature/d1_staggered
Wed, 27 Dec 2017 21:16:06 +0100, by Martin Almquist
Correct characteristic BC in staggered acoustics 1D constant coeff. feature/d1_staggered
Wed, 27 Dec 2017 17:18:51 +0100, by Martin Almquist
Add 6th order to D2variable. feature/poroelastic
Fri, 22 Dec 2017 16:38:08 +0100, by Martin Almquist
Add Dirichlet condition. Symmetric, semi-definite matrix and MMS convergence working with variable coeff! feature/poroelastic
Fri, 22 Dec 2017 14:16:17 +0100, by Martin Almquist
Add borrowing constants to D2variable feature/poroelastic
Fri, 22 Dec 2017 14:14:24 +0100, by Martin Almquist
Make free BC work with data. Bugfix domain size. feature/poroelastic
Wed, 20 Dec 2017 06:52:17 +0100, by Martin Almquist
Add possibility for damping terms at interpolation interface. feature/utux2D
Mon, 16 Oct 2017 21:56:12 -0700, by Martin Almquist
Make bcSetup assume 0 data feature/grids
Tue, 19 Dec 2017 17:07:07 +0100, by Jonatan Werpers
Free BC now yields symmetric negative semidefinite discretization. feature/poroelastic
Fri, 15 Dec 2017 16:23:10 -0800, by Martin Almquist
First implementation of elastic shear operator with free boundary BC. feature/poroelastic
Thu, 14 Dec 2017 13:54:20 -0800, by Martin Almquist
Add helper function for kronecker delta. feature/poroelastic
Thu, 14 Dec 2017 13:53:38 -0800, by Martin Almquist
Add function for rickerWavelet feature/grids
Thu, 30 Nov 2017 11:30:04 +0100, by Jonatan Werpers
Add monomial, vandermonde and stencil cretation tools feature/grids
Tue, 14 Nov 2017 16:46:07 +0100, by Jonatan Werpers
Make data more flexible, add print method, allow negative devider index feature/grids
Sat, 11 Nov 2017 13:56:15 -0800, by Jonatan Werpers
Allow the possibility to have discr as an input the an error function feature/grids
Sat, 11 Nov 2017 13:02:57 -0800, by Jonatan Werpers
Make noname.calculateErrors parallel feature/grids
Tue, 24 Oct 2017 16:32:00 +0200, by Jonatan Werpers
Add function for easily creating a convergence plot feature/grids
Tue, 24 Oct 2017 11:36:53 +0200, by Jonatan Werpers
Add some helpful properties to Color feature/grids
Tue, 24 Oct 2017 11:18:07 +0200, by Jonatan Werpers
Make gaussian work for vector inputs feature/grids
Tue, 24 Oct 2017 11:17:40 +0200, by Jonatan Werpers
Clean up and improve comments in StaggeredVariable feature/d1_staggered
Mon, 04 Dec 2017 11:18:13 -0800, by Martin Almquist
Add staggered 1D variable coefficient. Convergence study working. feature/d1_staggered
Mon, 04 Dec 2017 11:11:03 -0800, by Martin Almquist
Fix roundoff bug in diracDiscr and improve test. feature/d1_staggered
Wed, 15 Nov 2017 14:58:13 -0800, by Martin Almquist
Add characteristic BC feature/d1_staggered
Wed, 15 Nov 2017 14:56:52 -0800, by Martin Almquist
Make diracDiscr return zeros if x0 is outside grid. feature/d1_staggered
Tue, 14 Nov 2017 15:40:06 -0800, by Martin Almquist
Bugfix right boundary in diracDiscr feature/d1_staggered
Tue, 14 Nov 2017 15:35:51 -0800, by Martin Almquist
Add test for diracDiscr.m feature/d1_staggered
Tue, 14 Nov 2017 15:35:28 -0800, by Martin Almquist
Fix bug in diracDiscr feature/d1_staggered
Tue, 14 Nov 2017 15:01:50 -0800, by Martin Almquist
Add diracDiscr.m. Noticed bug if source is on grid point. feature/d1_staggered
Tue, 14 Nov 2017 14:28:35 -0800, by Martin Almquist
Switch to staggered-upwind staggered operators in Staggered1DAcoustics scheme. feature/d1_staggered
Mon, 13 Nov 2017 11:49:49 -0800, by Martin Almquist
Add staggered-upwind operators by Ken and Ossian. feature/d1_staggered
Mon, 13 Nov 2017 11:49:08 -0800, by Martin Almquist
Add scheme Staggered1DAcoustics feature/d1_staggered
Sat, 11 Nov 2017 20:30:13 -0800, by Martin Almquist
Add helper function for primal and dual 1D staggered grid, and a test for that function. feature/d1_staggered
Sat, 11 Nov 2017 20:26:37 -0800, by Martin Almquist
Add staggered grid class, Staggered<Structured. feature/d1_staggered
Sat, 11 Nov 2017 20:25:12 -0800, by Martin Almquist
Bug fix grid spacing in d1 staggered implementations. feature/d1_staggered
Fri, 10 Nov 2017 15:57:47 -0800, by Martin Almquist
Bug fix and improved comments in D1Staggered wrapper class. feature/d1_staggered
Fri, 10 Nov 2017 15:57:21 -0800, by Martin Almquist
Rename +- grids primal and dual grids feature/d1_staggered
Wed, 08 Nov 2017 10:56:09 -0800, by Martin Almquist
Add staggered operators feature/d1_staggered
Tue, 07 Nov 2017 20:44:13 -0800, by Martin Almquist
Merge bugfix/TiVectorInputs feature/grids
Mon, 23 Oct 2017 16:43:37 +0200, by Jonatan Werpers
Close before merge bugfix/TiVectorInputs
Mon, 23 Oct 2017 16:42:59 +0200, by Jonatan Werpers
Flip input and outputs if they are columnvectors. bugfix/TiVectorInputs
Mon, 23 Oct 2017 16:29:52 +0200, by Jonatan Werpers
Switch to elementwise multiplication where it was not used bugfix/TiVectorInputs
Mon, 23 Oct 2017 15:46:25 +0200, by Jonatan Werpers
Add tests to specify how a ti should respond to vector inputs bugfix/TiVectorInputs
Mon, 23 Oct 2017 15:42:56 +0200, by Jonatan Werpers
Merge feature/grids
Fri, 20 Oct 2017 23:31:20 +0200, by Jonatan Werpers
Merge feature/grids
Fri, 20 Oct 2017 23:30:05 +0200, by Jonatan Werpers
Factor out function for reordering components feature/grids
Fri, 20 Oct 2017 23:28:08 +0200, by Jonatan Werpers
Clean up numberOfCompnents feature/grids
Fri, 20 Oct 2017 23:24:42 +0200, by Jonatan Werpers
Avoid eval feature/grids
Fri, 20 Oct 2017 23:13:43 +0200, by Jonatan Werpers
Switch to using asserts for error checking feature/grids
Fri, 20 Oct 2017 23:07:03 +0200, by Jonatan Werpers
Factor out function for calculating the number of components feature/grids
Fri, 20 Oct 2017 22:59:30 +0200, by Jonatan Werpers
Print cleaning of evalOn and evalOnTest feature/grids
Fri, 20 Oct 2017 18:55:02 +0200, by Jonatan Werpers
Remove whitespace feature/grids
Fri, 20 Oct 2017 18:43:26 +0200, by Jonatan Werpers
Remove unused variables feature/grids
Fri, 20 Oct 2017 18:41:22 +0200, by Jonatan Werpers
Use matlab style if feature/grids
Fri, 20 Oct 2017 18:31:53 +0200, by Jonatan Werpers
Add a function for easily applying many boundary conditions at the same time feature/grids
Fri, 20 Oct 2017 16:01:43 +0200, by Jonatan Werpers
Add some todos feature/grids
Fri, 20 Oct 2017 15:57:49 +0200, by Jonatan Werpers
Beam: Add ability to set one BC at a time feature/grids
Fri, 20 Oct 2017 15:56:10 +0200, by Jonatan Werpers
Add helper function for convergence runs on discretizations feature/grids
Wed, 11 Oct 2017 16:01:22 +0200, by Jonatan Werpers
Add class to handle animations in a smoother and more modular way feature/grids
Wed, 11 Oct 2017 16:01:02 +0200, by Jonatan Werpers
Add assertion in time.Timestepper for robustness feature/grids
Wed, 11 Oct 2017 15:44:17 +0200, by Jonatan Werpers
Add assertScalar() feature/grids
Wed, 11 Oct 2017 15:43:52 +0200, by Jonatan Werpers
Add function for finding the path of sbplib feature/grids
Wed, 11 Oct 2017 15:43:31 +0200, by Jonatan Werpers
Remove diffSymfun, matlab already does this feature/grids
Mon, 09 Oct 2017 10:51:48 +0200, by Jonatan Werpers
Add interpolation to scheme feature/utux2D
Sat, 14 Oct 2017 22:38:42 -0700, by Martin Almquist
Merge to get interpolation operators. feature/utux2D
Sat, 14 Oct 2017 22:36:31 -0700, by Martin Almquist
Add inerpolation operator classes and implementations for MC and AWW. feature/interpolation
Sat, 14 Oct 2017 22:32:25 -0700, by Martin Almquist
Make grid.evalOn faster. feature/grids
Sat, 14 Oct 2017 22:28:27 -0700, by Martin Almquist
Make blockMatrix.toMatrix faster for large matrices. feature/grids
Sat, 14 Oct 2017 22:24:19 -0700, by Martin Almquist
Add centered interface coupling in addition to upwind feature/utux2D
Thu, 05 Oct 2017 20:21:20 -0700, by Martin Almquist
Remove unused output feature/grids
Wed, 04 Oct 2017 13:41:58 +0200, by Jonatan Werpers
Respect end time in step mode feature/grids
Thu, 28 Sep 2017 11:17:15 +0200, by Jonatan Werpers
Add assert function for number of arguments feature/grids
Thu, 28 Sep 2017 11:15:29 +0200, by Jonatan Werpers
SBPInTimeImplicitFormulation: Fix bug in calculation of forcing function feature/grids
Thu, 28 Sep 2017 11:14:34 +0200, by Jonatan Werpers
Add missing pause command in noname.Animate feature/grids
Tue, 26 Sep 2017 15:38:57 +0200, by Jonatan Werpers
Add some functions to make symbolic life easier feature/grids
Tue, 26 Sep 2017 15:38:25 +0200, by Jonatan Werpers
Add functions for calculating fourier transforms feature/grids
Thu, 14 Sep 2017 14:30:57 +0200, by Jonatan Werpers
Merge with better multiblock defs. feature/utux2D
Tue, 26 Sep 2017 13:28:49 -0700, by Martin Almquist
Add more boundary groups in Rectangle. Bugfix in boundaryGroups.all. feature/better_multiblock_defs
Tue, 26 Sep 2017 13:28:12 -0700, by Martin Almquist
Make Utux2D work feature/utux2D
Tue, 26 Sep 2017 13:26:25 -0700, by Martin Almquist
Merge with better_multiblock_defs feature/utux2D
Mon, 18 Sep 2017 20:06:25 +0200, by Martin Almquist
Complete Rectangle definition feature/better_multiblock_defs
Mon, 18 Sep 2017 19:41:12 +0200, by Martin Almquist
Merge with feature/grids feature/utux2D
Mon, 11 Sep 2017 14:17:15 +0200, by Martin Almquist
Add Utux2D scheme feature/utux2D
Mon, 11 Sep 2017 14:12:54 +0200, by Martin Almquist
Add stub for Rectangle feature/better_multiblock_defs
Mon, 11 Sep 2017 13:57:45 +0200, by Jonatan Werpers
Remove abstract methods getGridSizes from multiblock.Definition feature/better_multiblock_defs
Mon, 11 Sep 2017 13:57:04 +0200, by Jonatan Werpers
Add domain definition for circle. feature/better_multiblock_defs
Mon, 11 Sep 2017 13:50:29 +0200, by Jonatan Werpers
Add abstract class for multiblock definitions feature/better_multiblock_defs
Mon, 11 Sep 2017 13:46:08 +0200, by Jonatan Werpers
Add multiblock contour plot feature/grids
Fri, 08 Sep 2017 14:47:13 +0200, by Jonatan Werpers
Add an empty type of multiblock grid feature/grids
Fri, 08 Sep 2017 14:38:29 +0200, by Jonatan Werpers
In case of empty grids, make grid functions with the correct dimensions feature/grids
Fri, 08 Sep 2017 11:08:50 +0200, by Jonatan Werpers
Allow more than one type in type assertion feature/grids
Thu, 07 Sep 2017 14:08:31 +0200, by Jonatan Werpers
Rename grid.EmptyGrid to grid.Empty feature/grids
Thu, 07 Sep 2017 10:21:15 +0200, by Jonatan Werpers
Merge default feature/grids
Thu, 07 Sep 2017 09:54:45 +0200, by Jonatan Werpers
Make Cell class work with isempty()
Thu, 07 Sep 2017 09:54:21 +0200, by Jonatan Werpers
Be less strict about what is considered a block matrix feature/grids
Thu, 07 Sep 2017 09:21:04 +0200, by Jonatan Werpers
Add a type check for the grids cell array and a note regarding missplaced method feature/grids
Thu, 07 Sep 2017 09:18:55 +0200, by Jonatan Werpers
Add an Empty grid class feature/grids
Thu, 07 Sep 2017 09:16:12 +0200, by Jonatan Werpers
Add function for gaussian bumb feature/grids
Thu, 07 Sep 2017 09:10:17 +0200, by Jonatan Werpers
Add assert function for symbolic bools feature/grids
Thu, 07 Sep 2017 09:09:22 +0200, by Jonatan Werpers
Add functions for symmetric and skew parts of matrix feature/grids
Mon, 04 Sep 2017 17:50:27 +0200, by Jonatan Werpers
Remove data input from boundary condition function feature/utux2D
Sun, 03 Sep 2017 21:27:09 +0200, by Martin Almquist
Edit scheme.Utux: Add interface function. Compatible with new grids. Works with Utux_1D_interface. feature/utux2D
Thu, 31 Aug 2017 14:57:34 +0200, by Martin Almquist
Bug fixes in scheme.Utux feature/utux2D
Tue, 22 Aug 2017 13:53:31 +0200, by Martin Almquist
Merge laplace refactor. Refactor class to more closely resemble SBP notation. Fix bc bugs feature/grids
Fri, 01 Sep 2017 11:07:15 +0200, by Jonatan Werpers
Close branch feature/grids/laplace_refactor feature/grids/laplace_refactor
Fri, 01 Sep 2017 10:58:07 +0200, by Jonatan Werpers
Add todo about method name change feature/grids
Fri, 01 Sep 2017 10:52:56 +0200, by Jonatan Werpers
Remove unneeded sign information from get_boundary_ops feature/grids/laplace_refactor
Fri, 01 Sep 2017 10:45:37 +0200, by Jonatan Werpers
Switch implementation of boundary and interface to SBP notation feature/grids/laplace_refactor
Fri, 01 Sep 2017 10:43:43 +0200, by Jonatan Werpers
Add missing square feature/grids/laplace_refactor
Wed, 30 Aug 2017 17:42:22 +0200, by Jonatan Werpers
Fix bug in creation of boundary inner products feature/grids/laplace_refactor
Wed, 30 Aug 2017 17:33:41 +0200, by Jonatan Werpers
Fix sign error in Neumann BC feature/grids/laplace_refactor
Wed, 30 Aug 2017 17:29:33 +0200, by Jonatan Werpers
Add boundary inner products feature/grids/laplace_refactor
Wed, 30 Aug 2017 15:43:51 +0200, by Jonatan Werpers
Switch to using boundary ops for normal derivative feature/grids/laplace_refactor
Tue, 29 Aug 2017 13:10:57 +0200, by Jonatan Werpers
Merge feature/grids/laplace_refactor
Tue, 29 Aug 2017 13:04:07 +0200, by Jonatan Werpers
Fix bug where boundary operators were not stored in their properties feature/grids/laplace_refactor
Tue, 29 Aug 2017 13:03:45 +0200, by Jonatan Werpers
Clean up use of the sign in boundary and interface routines feature/grids/laplace_refactor
Tue, 29 Aug 2017 12:48:30 +0200, by Jonatan Werpers
Add creation of physical boundary normal derivatives feature/grids/laplace_refactor
Tue, 29 Aug 2017 12:32:57 +0200, by Jonatan Werpers
Merge default feature/grids/laplace_refactor
Tue, 29 Aug 2017 12:22:33 +0200, by Jonatan Werpers
Make spdiag accept both row and column vectors
Tue, 29 Aug 2017 12:22:01 +0200, by Jonatan Werpers
Better names for the metric coefficients feature/grids/laplace_refactor
Tue, 29 Aug 2017 11:21:02 +0200, by Jonatan Werpers
Reorder and restructure constructor feature/grids/laplace_refactor
Tue, 29 Aug 2017 11:04:15 +0200, by Jonatan Werpers
Reorganize properties of the class feature/grids/laplace_refactor
Tue, 29 Aug 2017 10:52:21 +0200, by Jonatan Werpers
Switch to using spdiag instead of spdiags feature/grids/laplace_refactor
Mon, 28 Aug 2017 19:01:40 +0200, by Jonatan Werpers
Merge default feature/grids
Mon, 28 Aug 2017 14:29:46 +0200, by Jonatan Werpers
Change away from matrix formulation in Rk4 second order form feature/grids
Mon, 28 Aug 2017 11:06:00 +0200, by Jonatan Werpers
Fix bugs in cell array initialization feature/grids
Thu, 24 Aug 2017 11:05:31 +0200, by Jonatan Werpers
Add assertion in inputs to grid.Cartesian feature/grids
Wed, 23 Aug 2017 11:21:19 +0200, by Jonatan Werpers
Add type assertion feature/grids
Wed, 23 Aug 2017 11:05:35 +0200, by Jonatan Werpers
Add todo to Beam feature/grids
Mon, 21 Aug 2017 11:20:20 +0200, by Jonatan Werpers
Add Ti parametrization of rectangle feature/grids
Mon, 21 Aug 2017 11:20:00 +0200, by Jonatan Werpers
Allow labels to be block ids feature/grids
Tue, 15 Aug 2017 12:57:36 +0200, by Jonatan Werpers
Add classes for easy plotting of functions on a multi block grid feature/grids
Mon, 14 Aug 2017 16:46:58 +0200, by Jonatan Werpers
Fix typo feature/grids
Mon, 14 Aug 2017 09:25:31 +0200, by Jonatan Werpers
Merge default feature/grids
Tue, 08 Aug 2017 13:26:30 +0200, by Jonatan Werpers
Add some todos feature/grids
Tue, 08 Aug 2017 13:25:19 +0200, by Jonatan Werpers
Merge default feature/grids
Tue, 08 Aug 2017 08:26:49 +0200, by Jonatan Werpers
Add note about a possible getBoundaryOperator method feature/grids
Tue, 08 Aug 2017 08:25:16 +0200, by Jonatan Werpers
Add an abstrac class as help when defining transfinite multiblock grids feature/grids
Mon, 07 Aug 2017 09:57:03 +0200, by Jonatan Werpers
Merge feature/boundaryGroup feature/grids
Mon, 07 Aug 2017 09:56:01 +0200, by Jonatan Werpers
Implement boundary_condition for boundary groups feature/boundaryGroup
Thu, 03 Aug 2017 18:07:27 +0200, by Jonatan Werpers
Factor out function for handling a single boundary condition feature/boundaryGroup
Thu, 03 Aug 2017 17:45:06 +0200, by Jonatan Werpers
Implement getBoundaryOperator for boundaryGroups in multiblock.DiffOp feature/boundaryGroup
Thu, 03 Aug 2017 17:38:05 +0200, by Jonatan Werpers
Implement getBoundaryNames in multiblock.Grid feature/boundaryGroup
Thu, 03 Aug 2017 15:49:32 +0200, by Jonatan Werpers
Implement getBoundary in multiblock.Grid feature/boundaryGroup
Thu, 03 Aug 2017 15:01:12 +0200, by Jonatan Werpers
Add some documentation and decide on public function signatures feature/boundaryGroup
Thu, 03 Aug 2017 14:09:00 +0200, by Jonatan Werpers
Give BoundaryGroup a better printing method feature/boundaryGroup
Thu, 03 Aug 2017 14:07:56 +0200, by Jonatan Werpers
Move the description of boundary identifiers to the grid package and update documentation for grid.Grid.getBoundaryNames feature/boundaryGroup
Thu, 03 Aug 2017 14:04:36 +0200, by Jonatan Werpers
Change the BoundaryGroup class into a simpler cellarray style feature/boundaryGroup
Thu, 03 Aug 2017 09:55:59 +0200, by Jonatan Werpers
Add documentation stubs for grid functions and boundary identifiers feature/grids
Wed, 02 Aug 2017 19:26:39 +0200, by Jonatan Werpers
Merge default feature/grids
Wed, 02 Aug 2017 15:46:10 +0200, by Jonatan Werpers
Merge with default feature/grids
Tue, 01 Aug 2017 12:35:38 +0200, by Jonatan Werpers
Add not-implemented-error for interface method in multiblock.DiffOp feature/grids
Tue, 01 Aug 2017 12:22:59 +0200, by Jonatan Werpers
Add a symmetric surf
Mon, 28 Aug 2017 14:28:45 +0200, by Jonatan Werpers
changed sign in penalty parameter feature/quantumTriangles
Mon, 07 Aug 2017 13:20:48 +0200, by Ylva Rydin
removed y-direction for debugging feature/quantumTriangles
Mon, 07 Aug 2017 11:56:53 +0200, by Ylva Rydin
Added J to propertied feature/quantumTriangles
Mon, 07 Aug 2017 09:02:49 +0200, by Ylva Rydin
sign change in SAT-TERM feature/quantumTriangles
Mon, 10 Jul 2017 09:27:58 +0200, by Ylva Rydin
Changed the penalty on the first derivative penalty terms, did not solve the problem feature/quantumTriangles
Fri, 07 Jul 2017 14:52:47 +0200, by Ylva Rydin
Tried to make skewsym. feature/quantumTriangles
Fri, 07 Jul 2017 14:22:02 +0200, by Ylva Rydin
Removed an unnessesary comment feature/quantumTriangles
Fri, 07 Jul 2017 13:33:05 +0200, by Ylva Rydin
Added arnoldi krylov subspace approximation feature/quantumTriangles
Mon, 26 Jun 2017 20:15:54 +0200, by Ylva Rydin
add H_xyz to hypsyst to compute H-norm feature/quantumTriangles
Mon, 26 Jun 2017 19:23:19 +0200, by Ylva Rydin
Added sqrt of Ji in the right places, not sure about the interfaces, will not test it properly now feature/quantumTriangles
Thu, 08 Jun 2017 10:33:36 +0200, by Ylva Rydin
tried to add 4th order magnus integrator which does not work feature/quantumTriangles
Fri, 02 Jun 2017 17:46:01 +0200, by Ylva Rydin
changed the magnus midpoint rule feature/quantumTriangles
Fri, 02 Jun 2017 17:43:59 +0200, by Ylva Rydin
moved all multiplications and divisions bu J and Ji to the siscretization to easier find the error feature/quantumTriangles
Fri, 02 Jun 2017 11:33:04 +0200, by Ylva Rydin
Start over with the non-symmetric shrodnger to ceep track of changes. feature/quantumTriangles
Mon, 29 May 2017 14:07:55 +0200, by Ylva Rydin
tried to make a symmetric scheme feature/quantumTriangles
Mon, 29 May 2017 13:54:16 +0200, by Ylva Rydin
Added the midpont magnus exponential integrator feature/quantumTriangles
Thu, 18 May 2017 11:44:29 +0200, by Ylva Rydin
Removed the expint which ises the package expode feature/quantumTriangles
Thu, 18 May 2017 11:43:35 +0200, by Ylva Rydin
Added the new abstract classes to hypsyst3D and Upwind1D to make them work with Jonatans changes feature/quantumTriangles
Tue, 16 May 2017 09:18:10 +0200, by Ylva Rydin
An attempt to add the exponential integrators feature/quantumTriangles
Tue, 16 May 2017 08:57:54 +0200, by Ylva Rydin
Found some small bugs when making slides for pressentation feature/quantumTriangles
Tue, 25 Apr 2017 09:52:32 +0200, by Ylva Rydin
Small changes feature/quantumTriangles
Thu, 20 Apr 2017 07:55:09 +0200, by Ylva Rydin
Commit before changing branch feature/quantumTriangles
Mon, 06 Mar 2017 17:23:52 +0100, by Ylva Rydin
chnaged sbp interfacein 1d among many things feature/quantumTriangles
Fri, 03 Mar 2017 16:19:41 +0100, by Ylva Rydin
Added 2D interface to shrodinger feature/quantumTriangles
Sat, 25 Feb 2017 12:44:01 +0100, by Ylva Rydin
Add 1d interface for shrodinger in 1d feature/quantumTriangles
Fri, 24 Feb 2017 13:58:18 +0100, by Ylva Rydin
Added new penalty parameter to the interface in shrodinger curve feature/quantumTriangles
Fri, 24 Feb 2017 09:04:02 +0100, by Ylva Rydin
Meged with default feature/quantumTriangles
Thu, 23 Feb 2017 09:32:30 +0100, by Ylva Rydin
Commit before merge feature/quantumTriangles
Thu, 23 Feb 2017 09:31:56 +0100, by Ylva Rydin
fixed a bug in the metric coefficients but something is wrong at the boundaries feature/quantumTriangles
Wed, 15 Feb 2017 11:21:04 +0100, by Ylva Rydin
Schrodinger 2d runs without exploding with fixed coordinates feature/quantumTriangles
Fri, 10 Feb 2017 14:29:53 +0100, by Ylva Rydin
Schrodinger2dCurve Added feature/quantumTriangles
Thu, 09 Feb 2017 11:41:21 +0100, by Ylva Rydin
Add surface log plot function
Fri, 25 Aug 2017 12:58:04 +0200, by Jonatan Werpers
Add a function spzeros()
Tue, 08 Aug 2017 13:25:54 +0200, by Jonatan Werpers
Add isEquidistant function for testing vectors
Tue, 08 Aug 2017 08:26:25 +0200, by Jonatan Werpers
Add assert frunction for type
Tue, 08 Aug 2017 08:26:02 +0200, by Jonatan Werpers
Merge feature/subclassable_cellarray
Wed, 02 Aug 2017 15:25:36 +0200, by Jonatan Werpers
Implement tests for subscript assignment feature/sublassable_cellarray
Wed, 02 Aug 2017 15:23:57 +0200, by Jonatan Werpers
Add some documentation and minor clean up feature/sublassable_cellarray
Wed, 02 Aug 2017 14:49:56 +0200, by Jonatan Werpers
Remove disp and display methods feature/sublassable_cellarray
Wed, 02 Aug 2017 12:27:25 +0200, by Jonatan Werpers
Implement handeling of stacked indexing feature/sublassable_cellarray
Wed, 02 Aug 2017 12:17:09 +0200, by Jonatan Werpers
Implement to string method feature/sublassable_cellarray
Wed, 02 Aug 2017 12:01:25 +0200, by Jonatan Werpers
Implement end function and fix test for colon indexing feature/sublassable_cellarray
Wed, 02 Aug 2017 11:19:10 +0200, by Jonatan Werpers
Implement size, length and transpose feature/sublassable_cellarray
Wed, 02 Aug 2017 10:51:44 +0200, by Jonatan Werpers
Implement tests for size, length and transpose feature/sublassable_cellarray
Wed, 02 Aug 2017 10:31:48 +0200, by Jonatan Werpers
Implement tests for round and curly indexing, add more stubs feature/sublassable_cellarray
Wed, 02 Aug 2017 10:22:20 +0200, by Jonatan Werpers
Add test stubs for size and length feature/sublassable_cellarray
Wed, 02 Aug 2017 10:03:59 +0200, by Jonatan Werpers
Implement tests for horzcat and vertcat. Fix bugs found feature/sublassable_cellarray
Wed, 02 Aug 2017 09:38:12 +0200, by Jonatan Werpers
Add to string stub. feature/sublassable_cellarray
Wed, 02 Aug 2017 09:34:45 +0200, by Jonatan Werpers
Add some missing semicolon feature/sublassable_cellarray
Wed, 02 Aug 2017 09:34:26 +0200, by Jonatan Werpers
Add test stubs. feature/sublassable_cellarray
Wed, 02 Aug 2017 08:48:56 +0200, by Jonatan Werpers
Remove debug printing feature/sublassable_cellarray
Wed, 02 Aug 2017 08:48:02 +0200, by Jonatan Werpers
Implement subsref properly feature/sublassable_cellarray
Tue, 01 Aug 2017 12:59:06 +0200, by Jonatan Werpers
Make the overloaded methods call the subclass constructor feature/sublassable_cellarray
Tue, 01 Aug 2017 12:41:42 +0200, by Jonatan Werpers
Initial commit feature/sublassable_cellarray
Tue, 01 Aug 2017 09:28:10 +0200, by Jonatan Werpers
Add structArray to toString()
Tue, 01 Aug 2017 12:32:25 +0200, by Jonatan Werpers
Implement a simple but general text table
Tue, 01 Aug 2017 12:24:52 +0200, by Jonatan Werpers
Fix math in conversion to first order form system feature/grids
Thu, 22 Jun 2017 13:07:07 +0200, by Jonatan Werpers
Move f(t) to the RHS feature/grids
Thu, 22 Jun 2017 13:06:41 +0200, by Jonatan Werpers
Fix bug in argument to f during time stepping feature/grids
Thu, 22 Jun 2017 13:06:03 +0200, by Jonatan Werpers
Make f parameter optional. feature/grids
Thu, 22 Jun 2017 13:05:32 +0200, by Jonatan Werpers
Add SBPinTime for linear DAE formulations (BUGS!) feature/grids
Mon, 19 Jun 2017 16:50:13 +0200, by Jonatan Werpers
Merge with default feature/grids
Mon, 19 Jun 2017 09:42:59 +0200, by Jonatan Werpers
Add notability colors to the Color class
Mon, 19 Jun 2017 09:41:03 +0200, by Jonatan Werpers
Add note about how to handle boundary groups feature/grids
Mon, 19 Jun 2017 09:39:50 +0200, by Jonatan Werpers
Merge feature/grids
Fri, 12 May 2017 16:20:43 +0200, by Jonatan Werpers
Add function to run checkcode on all matlab files
Fri, 12 May 2017 16:19:34 +0200, by Jonatan Werpers
Switch to first order start in CdiffImplicit to make the scheme more robust. feature/grids
Thu, 11 May 2017 14:20:42 +0200, by Jonatan Werpers
Add function to multiblock.Grid for getting plot matrices feature/grids
Thu, 11 May 2017 10:09:52 +0200, by Jonatan Werpers
Allow any coefficient in LaplaceCurvilinear feature/grids
Wed, 10 May 2017 13:16:12 +0200, by Jonatan Werpers
Add warning for possible bug feature/grids
Wed, 10 May 2017 13:13:06 +0200, by Jonatan Werpers
Copy Wave2dCurve to new scheme LaplaceCurvilinear feature/grids
Tue, 09 May 2017 14:58:27 +0200, by Jonatan Werpers
Add first derivative operators to Wave2DCurve feature/grids
Tue, 09 May 2017 14:51:29 +0200, by Jonatan Werpers
Better error message feature/grids
Tue, 09 May 2017 14:47:52 +0200, by Jonatan Werpers
Change the version function to say that we are on the feature/grids branch feature/grids
Wed, 12 Apr 2017 13:24:16 +0200, by Jonatan Werpers
Merge with default feature/grids
Wed, 12 Apr 2017 13:01:57 +0200, by Jonatan Werpers
Clean up savepng().
Wed, 12 Apr 2017 13:01:20 +0200, by Jonatan Werpers
Merge with default feature/grids
Sun, 19 Mar 2017 13:40:52 +0100, by Jonatan Werpers
Fix bug in spyh() when the matix has no non-zero elements.
Sun, 19 Mar 2017 13:39:49 +0100, by Jonatan Werpers
Merge default into feature/grids feature/grids
Mon, 13 Mar 2017 14:44:31 +0100, by Jonatan Werpers
Add string methods to OpSets that are missing them feature/grids
Mon, 13 Mar 2017 14:43:37 +0100, by Jonatan Werpers
Improve inteface and functionality of plotConvergence()
Mon, 13 Mar 2017 14:40:14 +0100, by Jonatan Werpers
Improve interface of convergenceTable()
Mon, 13 Mar 2017 14:34:56 +0100, by Jonatan Werpers
Fix bug in multiblock DiffOp feature/grids
Mon, 13 Mar 2017 14:33:01 +0100, by Jonatan Werpers
Merge default into feature/grids feature/grids
Tue, 21 Feb 2017 16:48:04 +0100, by Jonatan Werpers
Add a vector of all colors to Color
Tue, 21 Feb 2017 16:40:55 +0100, by Jonatan Werpers
Merge default into feature/grid feature/grids
Tue, 21 Feb 2017 13:16:56 +0100, by Jonatan Werpers
Bug fix sbp in time gauss default arg
Fri, 17 Feb 2017 15:08:25 +0100, by Martin Almquist
Move 3d transfinite interpolation to it's correct location. feature/grids
Thu, 09 Feb 2017 08:37:55 +0100, by Jonatan Werpers
Merge in feature/grids feature/quantumTriangles
Wed, 08 Feb 2017 11:10:13 +0100, by Ylva Rydin
Meged with default feature/quantumTriangles
Wed, 08 Feb 2017 09:18:08 +0100, by Ylva Rydin
Removed some comments feature/quantumTriangles
Wed, 08 Feb 2017 09:07:07 +0100, by Ylva Rydin
Added a scheme for the time deforming shrodinger equation in 1d feature/quantumTriangles
Mon, 06 Feb 2017 09:54:18 +0100, by Ylva Rydin
Changed so that the shrodinger scheme works with the grids feature/quantumTriangles
Wed, 01 Feb 2017 17:04:03 +0100, by Ylva Rydin
merged with feature/beams feature/quantumTriangles
Thu, 26 Jan 2017 15:59:25 +0100, by Ylva Rydin
Updated the Shrodinger scheme to the new operator syntax feature/quantumTriangles
Wed, 25 Jan 2017 17:14:17 +0100, by Ylva Rydin
Merge feature/beams feature/grids
Tue, 07 Feb 2017 16:09:02 +0100, by Jonatan Werpers
Close branch feature/beams. It was poisoned by changes that belonged on feature/grids feature/beams
Tue, 07 Feb 2017 16:08:26 +0100, by Jonatan Werpers
Merge in default. feature/grids
Tue, 07 Feb 2017 15:47:51 +0100, by Jonatan Werpers
Merge in default feature/beams
Tue, 07 Feb 2017 15:59:22 +0100, by Jonatan Werpers
Merged in feature/better_map (pull request #8)
Tue, 07 Feb 2017 14:38:51 +0000, by Jonatan Werpers
Close branch feature/better_map feature/better_map
Tue, 07 Feb 2017 14:38:51 +0000, by Jonatan Werpers
Merged in feature/diags (pull request #7)
Tue, 07 Feb 2017 14:37:55 +0000, by Jonatan Werpers
Close branch feature/diags feature/diags
Tue, 07 Feb 2017 14:37:55 +0000, by Jonatan Werpers
Add tests and fix a bunch of bugs. feature/better_map
Thu, 02 Feb 2017 20:49:06 +0100, by Jonatan Werpers
Add todo. feature/better_map
Thu, 02 Feb 2017 16:41:41 +0100, by Jonatan Werpers
Overload indexing operations. feature/better_map
Thu, 02 Feb 2017 16:22:47 +0100, by Jonatan Werpers
Add a test implementation feature/better_map
Thu, 02 Feb 2017 15:57:43 +0100, by Jonatan Werpers
Add missing eol feature/diags
Tue, 07 Feb 2017 14:03:20 +0100, by Jonatan Werpers
Add full matrix equivalent of spdiags feature/diags
Tue, 07 Feb 2017 13:58:03 +0100, by Jonatan Werpers
Merged in feature/SBPInTimeGauss (pull request #6)
Tue, 07 Feb 2017 12:54:52 +0000, by Jonatan Werpers
Close branch feature/SBPInTimeGauss feature/SBPInTimeGauss
Tue, 07 Feb 2017 12:54:52 +0000, by Jonatan Werpers
Remove m as input to implementation function. Fix error message for invalid m to D1Gauss feature/SBPInTimeGauss
Tue, 07 Feb 2017 13:49:46 +0100, by Jonatan Werpers
Remove extra whitespace. feature/SBPInTimeGauss
Tue, 07 Feb 2017 13:48:11 +0100, by Jonatan Werpers
Fixed bug with initial data and made gauss the default type feature/SBPInTimeGauss
Thu, 02 Feb 2017 19:30:16 +0100, by Martin Almquist
Added D1Gauss to SBPInTime feature/SBPInTimeGauss
Thu, 02 Feb 2017 17:18:51 +0100, by Martin Almquist
Implementation of D1 based on Gauss quadrature formula with 4 nodes. feature/SBPInTimeGauss
Thu, 02 Feb 2017 17:05:43 +0100, by Martin Almquist
Merged in feature/SBPinTimeClarity (pull request #5)
Thu, 02 Feb 2017 14:46:36 +0000, by Martin Almquist
Close branch feature/SBPinTimeClarity feature/SBPinTimeClarity
Thu, 02 Feb 2017 14:46:36 +0000, by Martin Almquist
Add string methods to some sbp classes. feature/beams
Thu, 02 Feb 2017 10:10:02 +0100, by Jonatan Werpers
Merge clarity changes for SBPInTime. feature/beams
Thu, 02 Feb 2017 10:07:49 +0100, by Jonatan Werpers
Add function to center colorlimits. feature/beams
Tue, 31 Jan 2017 13:23:52 +0100, by Jonatan Werpers
Add wrapper for time stepping second order problems. feature/SBPinTimeClarity
Thu, 02 Feb 2017 09:58:18 +0100, by Jonatan Werpers
Refactor for clarity feature/SBPinTimeClarity
Thu, 02 Feb 2017 09:57:54 +0100, by Jonatan Werpers
Remove extra lines. feature/SBPinTimeClarity
Thu, 02 Feb 2017 09:47:21 +0100, by Jonatan Werpers
Remove whitespace. feature/SBPinTimeClarity
Thu, 02 Feb 2017 09:46:22 +0100, by Jonatan Werpers
Merge with default. feature/beams
Thu, 26 Jan 2017 15:17:38 +0100, by Jonatan Werpers
Merge with default. feature/beams
Wed, 25 Jan 2017 16:22:18 +0100, by Jonatan Werpers
Fix index error in CdiffImplicit. feature/beams
Mon, 23 Jan 2017 20:26:49 +0100, by Jonatan Werpers
Better input parsing for multiblock DiffOp. feature/beams
Thu, 12 Jan 2017 17:17:58 +0100, by Jonatan Werpers
Allow formats for timeTask. feature/beams
Thu, 12 Jan 2017 15:51:24 +0100, by Jonatan Werpers
Fix bug with D1 in D4Variable. feature/beams
Thu, 12 Jan 2017 14:22:17 +0100, by Jonatan Werpers
Add borrowing constants for D2 operators in D4Variable feature/beams
Tue, 10 Jan 2017 17:31:28 +0100, by Jonatan Werpers
Add function to multiply blockmatrices. feature/beams
Mon, 09 Jan 2017 11:20:28 +0100, by Jonatan Werpers
Swtich to using centerd difference for calculating the first derivative feature/beams
Thu, 05 Jan 2017 18:36:01 +0100, by Jonatan Werpers
Fixed bug in curvilinear. feature/beams
Thu, 05 Jan 2017 13:28:43 +0100, by Jonatan Werpers
Fix bug in implicit cdiff. Add stepTo method for timesteppers. feature/beams
Mon, 02 Jan 2017 12:21:01 +0100, by Jonatan Werpers
Fix bug in Characteristic BC for Wave2dCurve. feature/beams
Mon, 02 Jan 2017 09:24:48 +0100, by Jonatan Werpers
Fix bug in CdiffImplicit. feature/beams
Mon, 02 Jan 2017 09:22:22 +0100, by Jonatan Werpers
Edit for clarity. feature/beams
Mon, 02 Jan 2017 09:12:05 +0100, by Jonatan Werpers
Better error message. feature/beams
Mon, 02 Jan 2017 09:07:49 +0100, by Jonatan Werpers
CdiffImplicit: Fixed a bug. Switched to LU. feature/beams
Mon, 12 Dec 2016 11:35:23 +0100, by Jonatan Werpers
Added an implicit central time stepping scheme. feature/beams
Fri, 09 Dec 2016 16:03:30 +0100, by Jonatan Werpers
Merged in feature/hypsyst (pull request #4)
Thu, 26 Jan 2017 13:07:51 +0000, by Jonatan Werpers
Close branch feature/hypsyst feature/hypsyst
Thu, 26 Jan 2017 13:07:51 +0000, by Jonatan Werpers
removed the white space feature/hypsyst
Thu, 26 Jan 2017 14:06:59 +0100, by Ylva Rydin
Meged with default feature/hypsyst
Thu, 26 Jan 2017 14:03:20 +0100, by Ylva Rydin
Merge.
Thu, 26 Jan 2017 14:01:55 +0100, by Jonatan Werpers
Add functions for scaling figure windows and axes.
Wed, 25 Jan 2017 16:21:14 +0100, by Jonatan Werpers
Removed typo feature/hypsyst
Thu, 26 Jan 2017 13:57:03 +0100, by Ylva Rydin
added spece :) feature/hypsyst
Thu, 26 Jan 2017 13:52:22 +0100, by Ylva Rydin
Removed stupid comment feature/hypsyst
Thu, 26 Jan 2017 13:49:37 +0100, by Ylva Rydin
Added some comments and cleaned up the code a little feature/hypsyst
Thu, 26 Jan 2017 09:57:24 +0100, by Ylva Rydin
Made some small changes. feature/hypsyst
Wed, 25 Jan 2017 15:37:12 +0100, by Ylva Rydin
Added different operators to Utux feature/hypsyst
Tue, 27 Dec 2016 09:11:29 +0100, by Ylva Rydin
Tried to speed up the matrix set-up a little feature/hypsyst
Tue, 13 Dec 2016 09:28:33 +0100, by Ylva Rydin
Added SBP in time timestepper.
Tue, 24 Jan 2017 14:01:18 +0100, by Martin Almquist
Closing Martins bad branch to the tune of 20 whip lashes. martin-thesis-plots
Tue, 20 Dec 2016 15:45:06 +0100, by Martin Almquist
Merge default heads.
Tue, 20 Dec 2016 15:36:29 +0100, by Martin Almquist
Added 2nd order accurate 2nd derivative with variable coefficents in a separate implementation file, used by the class D2Variable.
Tue, 20 Dec 2016 15:04:02 +0100, by Martin Almquist
Meged with default feature/hypsyst
Thu, 08 Dec 2016 13:38:04 +0100, by Ylva Rydin
Fixed penalty parameter in Wave2Dcurve. feature/beams
Thu, 08 Dec 2016 11:11:28 +0100, by Jonatan Werpers
Merge with default. feature/beams
Tue, 06 Dec 2016 14:14:41 +0100, by Jonatan Werpers
Added some utility functions. Improved some documentation.
Mon, 05 Dec 2016 13:31:57 +0100, by Jonatan Werpers
Minor clean up of d4_variable_4. feature/beams
Mon, 05 Dec 2016 13:10:44 +0100, by Jonatan Werpers
The problem with the upwid operators is fixed feature/hypsyst
Thu, 08 Dec 2016 10:52:15 +0100, by Ylva Rydin
Upwind doed not work in the non curve-linear case. feature/hypsyst
Thu, 08 Dec 2016 10:42:11 +0100, by Ylva Rydin
Removed inv(Vi) to save time feature/hypsyst
Mon, 28 Nov 2016 08:46:28 +0100, by Ylva Rydin
meged with default feature/hypsyst
Thu, 10 Nov 2016 20:49:25 +0100, by Ylva Rydin
Changed operator in Utux feature/hypsyst
Thu, 10 Nov 2016 20:47:40 +0100, by Ylva Rydin
Curve linear code in 3D converges for manufactures solution feature/hypsyst
Thu, 03 Nov 2016 22:03:09 +0100, by Ylva Rydin
A commit before I try resolving the performance issues feature/hypsyst
Wed, 02 Nov 2016 00:02:01 +0100, by Ylva Rydin
A 3D is added and an attempt to imlement 3D transfinit interpolation has been initialized feature/hypsyst
Thu, 13 Oct 2016 09:34:30 +0200, by Ylva Rydin
Played around with Ti show and plot settings to create pretty pics for thesis. martin-thesis-plots
Sat, 03 Dec 2016 23:00:44 +0100, by Martin Almquist
Implemented characteristic form BC in Wave2dCurve. feature/beams
Wed, 16 Nov 2016 16:16:44 -0800, by Jonatan Werpers
Allowed muliple closure BCs in multiblock.DiffOp. feature/beams
Wed, 16 Nov 2016 16:15:53 -0800, by Jonatan Werpers
Rungekutta bug fixes. feature/beams
Wed, 16 Nov 2016 15:39:16 -0800, by Jonatan Werpers
Added get method for boundary operators on multiblock DiffOp feature/beams
Mon, 14 Nov 2016 14:54:53 -0800, by Jonatan Werpers
Fixed bug in parameter parsing. feature/beams
Fri, 04 Nov 2016 11:14:29 -0700, by Jonatan Werpers
Added a note. feature/beams
Fri, 04 Nov 2016 11:13:58 -0700, by Jonatan Werpers
Fixed error in boundary point check. feature/beams
Fri, 04 Nov 2016 11:12:47 -0700, by Jonatan Werpers
scheme.Beam: Fixed stability of free bc. feature/beams
Mon, 31 Oct 2016 16:25:46 +0100, by Jonatan Werpers
Implemented free BC. Not tested yet. feature/beams
Mon, 24 Oct 2016 17:01:34 +0200, by Jonatan Werpers
Made block matrices created from a matrix always have matrix blocks, never empty. feature/beams
Mon, 24 Oct 2016 17:01:05 +0200, by Jonatan Werpers
Updated Wave2dCurve to use the new grid classes. feature/beams
Fri, 21 Oct 2016 12:59:07 +0200, by Jonatan Werpers
Added missing string method. feature/beams
Fri, 21 Oct 2016 12:27:18 +0200, by Jonatan Werpers
Bug fix in boundary condition. feature/beams
Fri, 21 Oct 2016 11:31:06 +0200, by Jonatan Werpers
Merge with default. feature/beams
Tue, 18 Oct 2016 17:26:02 +0200, by Jonatan Werpers
Fixed some bugs in parametrization.Curve. feature/beams
Tue, 04 Oct 2016 11:43:35 +0200, by Jonatan Werpers
Fixed a bug in draw and added a helper function to parametrization.Ti. feature/beams
Mon, 03 Oct 2016 11:44:05 +0200, by Jonatan Werpers
Made dictionary more general. feature/beams
Thu, 29 Sep 2016 13:04:16 +0200, by Jonatan Werpers
Added a string method to OpSet. feature/beams
Thu, 29 Sep 2016 12:56:37 +0200, by Jonatan Werpers
Bug fixes in operators. feature/beams
Wed, 28 Sep 2016 16:31:06 +0200, by Jonatan Werpers
Clean up and fixing of new operators feature/beams
Wed, 28 Sep 2016 12:39:12 +0200, by Jonatan Werpers
Calculated borrowin for D4Lonely. feature/beams
Tue, 27 Sep 2016 09:46:58 +0200, by Jonatan Werpers
Fixed bug in setting of boundary derivative. feature/beams
Tue, 27 Sep 2016 08:44:17 +0200, by Jonatan Werpers
Renamed some operator implementations. feature/beams
Mon, 26 Sep 2016 09:55:16 +0200, by Jonatan Werpers
Created new operator class for lonely D4 operators. Removed some output parameters of implementations. feature/beams
Mon, 26 Sep 2016 09:51:45 +0200, by Jonatan Werpers
Cleaning d4_variable_8_higher_boundary_order.m feature/beams
Mon, 26 Sep 2016 09:19:08 +0200, by Jonatan Werpers
Clean up of d4_variable_6_3.m feature/beams
Mon, 26 Sep 2016 09:12:08 +0200, by Jonatan Werpers
Clean up of d4_variable_6_2.m feature/beams
Mon, 26 Sep 2016 09:04:57 +0200, by Jonatan Werpers
Cleaned d4_variable_8_min_boundary_points feature/beams
Mon, 26 Sep 2016 08:57:25 +0200, by Jonatan Werpers
Cleaned d4_variable_6_min_boundary_points. feature/beams
Mon, 26 Sep 2016 08:52:03 +0200, by Jonatan Werpers
Cleaned up d4_variable_4_min_boundary. Removed incorrect D2s from a bunch of files. feature/beams
Mon, 26 Sep 2016 08:44:17 +0200, by Jonatan Werpers
Clean up 6th order. feature/beams
Sun, 25 Sep 2016 16:52:26 +0200, by Jonatan Werpers
Collected boundary operators. feature/beams
Fri, 23 Sep 2016 23:10:44 +0200, by Jonatan Werpers
Cleaning of variable 2nd deriv in 4th order. feature/beams
Fri, 23 Sep 2016 22:58:45 +0200, by Jonatan Werpers
Corrections and clean up order 4 feature/beams
Fri, 23 Sep 2016 22:55:30 +0200, by Jonatan Werpers
Cleaning order 2. feature/beams
Fri, 23 Sep 2016 21:58:52 +0200, by Jonatan Werpers
Fixed formatting. feature/beams
Fri, 23 Sep 2016 19:14:04 +0200, by Jonatan Werpers
Fixed function names in renamed files. feature/beams
Fri, 23 Sep 2016 14:59:55 +0200, by Jonatan Werpers
Moved operator implementations and fixed some naming. feature/beams
Fri, 23 Sep 2016 14:55:08 +0200, by Jonatan Werpers
Renamed file. feature/beams
Fri, 23 Sep 2016 10:52:53 +0200, by Jonatan Werpers
Improved form of D4CompatibleVariable. feature/beams
Fri, 23 Sep 2016 10:51:37 +0200, by Jonatan Werpers
Merge with default. feature/beams
Fri, 23 Sep 2016 10:40:12 +0200, by Jonatan Werpers
Added function to calculate multiple solutions to an equation. feature/beams
Thu, 22 Sep 2016 09:34:27 +0200, by Jonatan Werpers
Made opt more useful. feature/beams
Mon, 12 Sep 2016 14:08:27 +0200, by Jonatan Werpers
copyWithDefault: fixed bug. feature/beams
Mon, 12 Sep 2016 14:08:06 +0200, by Jonatan Werpers
Fixed Wave2dCurve for new operators. Some cleanup in d2_variable_4.
Thu, 13 Oct 2016 09:34:42 +0200, by Jonatan Werpers
Fixes in Upwind operators and Euler1D scheme.
Thu, 29 Sep 2016 16:27:33 +0200, by Jonatan Werpers
HypsystCurve2D Seems to work (Converges with MMS) feature/hypsyst
Wed, 05 Oct 2016 17:36:34 +0200, by Ylva Rydin
A commit before i destroy everything feature/hypsyst
Tue, 04 Oct 2016 16:25:38 +0200, by Ylva Rydin
A commit before I change the boundary treatment feature/hypsyst
Tue, 04 Oct 2016 09:11:49 +0200, by Ylva Rydin
The curvelinear works for quads feature/hypsyst
Tue, 04 Oct 2016 08:40:42 +0200, by Ylva Rydin
Have tried to make a curvelinear sheme for hypsysts. Does not really work yet... feature/hypsyst
Mon, 03 Oct 2016 08:33:47 +0200, by Ylva Rydin
Renamed class. feature/hypsyst
Mon, 26 Sep 2016 14:21:37 +0200, by Jonatan Werpers
Fixed some formatting and naming. feature/hypsyst
Mon, 26 Sep 2016 14:19:34 +0200, by Jonatan Werpers
"General" boundary conditions implemented feature/hypsyst
Mon, 26 Sep 2016 09:54:43 +0200, by Ylva Rydin
Works with varying coefficients and char boundary condition feature/hypsyst
Fri, 23 Sep 2016 16:30:51 +0200, by Ylva Rydin
Changed how the matrices are built feature/hypsyst
Fri, 23 Sep 2016 14:48:54 +0200, by Ylva Rydin
Have made a lot of stupid changes in hypsyst in order to find a stupid bug feature/hypsyst
Wed, 21 Sep 2016 16:30:34 +0200, by Ylva Rydin
A first attempt to make a general scheme fo hyperbolic systems feature/hypsyst
Fri, 16 Sep 2016 14:51:17 +0200, by Ylva Rydin
Merged in feature/textTable (pull request #3)
Mon, 12 Sep 2016 15:18:25 +0200, by Martin Almquist
Close branch feature/textTable feature/textTable
Mon, 12 Sep 2016 15:18:25 +0200, by Martin Almquist
latexTable: similar function that produces latex code. feature/textTable
Mon, 12 Sep 2016 14:48:23 +0200, by Martin Almquist
plainTextTable working. feature/textTable
Mon, 12 Sep 2016 14:10:40 +0200, by Martin Almquist
Added tag v0.1 for changeset 18c023aaf3f7
Mon, 12 Sep 2016 12:58:18 +0200, by Jonatan Werpers
Merged in operator_remake (pull request #2)
Mon, 12 Sep 2016 12:53:02 +0200, by Jonatan Werpers
Close branch operator_remake operator_remake
Mon, 12 Sep 2016 12:53:02 +0200, by Jonatan Werpers
Merge. v0.1
Mon, 12 Sep 2016 11:14:00 +0200, by Jonatan Werpers
savepng: Added todo and fixed size bug.
Fri, 09 Sep 2016 13:14:12 +0200, by Jonatan Werpers
Added some documentation. feature/beams
Fri, 09 Sep 2016 13:11:25 +0200, by Jonatan Werpers
Merged with default. feature/beams
Thu, 08 Sep 2016 08:47:16 +0200, by Jonatan Werpers
Fixed bug with scaling. feature/beams
Thu, 08 Sep 2016 08:43:30 +0200, by Jonatan Werpers
Made evalOn give more error message. feature/beams
Wed, 07 Sep 2016 13:47:05 +0200, by Jonatan Werpers
Fixed documentation for Curvilinear and evalOn. feature/beams
Wed, 07 Sep 2016 10:13:26 +0200, by Jonatan Werpers
Improvments to eval on grids. Added function to extrac components of a vector gf. feature/beams
Tue, 06 Sep 2016 17:28:11 +0200, by Jonatan Werpers
Fixed a comment. feature/beams
Tue, 06 Sep 2016 15:54:45 +0200, by Jonatan Werpers
grid: Added evalOn for scalar functions. feature/beams
Tue, 06 Sep 2016 15:51:41 +0200, by Jonatan Werpers
Added evalfunction to Ti. feature/beams
Tue, 06 Sep 2016 13:22:28 +0200, by Jonatan Werpers
Started adding a function for texttables. feature/textTable
Mon, 05 Sep 2016 16:41:13 +0200, by Jonatan Werpers
added a u_t+u_x=0 scheme
Fri, 09 Sep 2016 16:47:53 +0200, by Ylva Rydin
Bug fix operator_remake
Fri, 09 Sep 2016 15:51:57 +0200, by Martin Almquist
Renamned boundary operators! operator_remake
Fri, 09 Sep 2016 15:06:03 +0200, by Martin Almquist
Sparsified all implementation files, removed all matlab warnings, fixed small bugs on minimum grid points. operator_remake
Fri, 09 Sep 2016 14:53:41 +0200, by Martin Almquist
Added error message for too few grid points to all implementation files. operator_remake
Fri, 09 Sep 2016 11:03:13 +0200, by Martin Almquist
Added warning for 12th order 2nd der, D2=D1*D1 operator_remake
Fri, 09 Sep 2016 10:41:31 +0200, by Martin Almquist
Changed input parameter L (domain length) to lim (cell with domain boundaries) operator_remake
Fri, 09 Sep 2016 10:39:12 +0200, by Martin Almquist
Renamed standard class to D2Standard etc, Rewrote class properties. operator_remake
Thu, 08 Sep 2016 17:50:30 +0200, by Martin Almquist
Removed static method smallestGrid operator_remake
Thu, 08 Sep 2016 15:37:48 +0200, by Martin Almquist
Moved and renamned all implementations. operator_remake
Thu, 08 Sep 2016 15:35:45 +0200, by Martin Almquist
Removed incomplete periodic class. operator_remake
Thu, 08 Sep 2016 14:36:06 +0200, by Martin Almquist
Added empty borrowing property to nonequidstant class. operator_remake
Thu, 08 Sep 2016 13:44:13 +0200, by Martin Almquist
Merged nonequidistant into one class and cleaned up. operator_remake
Thu, 08 Sep 2016 13:28:35 +0200, by Martin Almquist
Bug fix 12th order 2nd der. operator_remake
Wed, 07 Sep 2016 16:46:20 +0200, by Martin Almquist
Bug fix in D2.m, added 12th order. operator_remake
Wed, 07 Sep 2016 16:41:31 +0200, by Martin Almquist
Added ordinary 12th order accurate, with D1*D1 as 2nd derivative. operator_remake
Wed, 07 Sep 2016 15:54:41 +0200, by Martin Almquist
Cleaned up 12th order minimal file. operator_remake
Wed, 07 Sep 2016 14:49:21 +0200, by Martin Almquist
Bug fixes in nonequidistant class files. operator_remake
Wed, 07 Sep 2016 14:29:38 +0200, by Martin Almquist
Renamned class files and added nonequidistant operators. operator_remake
Wed, 07 Sep 2016 13:40:41 +0200, by Martin Almquist
Bugfix convergenceTable->latexTable. Works with same input as plainTextTable now.
Tue, 06 Sep 2016 10:36:33 +0200, by Martin Almquist
Merged in default. feature/beams
Mon, 05 Sep 2016 16:51:22 +0200, by Jonatan Werpers
Started modifying operator files. feature/beams
Mon, 05 Sep 2016 16:38:41 +0200, by Jonatan Werpers
Fixed package names in +parametrization feature/beams
Mon, 05 Sep 2016 16:34:22 +0200, by Jonatan Werpers
Fixed function name. feature/beams
Wed, 31 Aug 2016 17:31:25 +0200, by Jonatan Werpers
Added a bunch of new operators. Still non-functional. feature/beams
Wed, 31 Aug 2016 17:16:03 +0200, by Jonatan Werpers
Rename of some sbp operators. feature/beams
Wed, 31 Aug 2016 16:54:47 +0200, by Jonatan Werpers
Added function to save the size of a figure window as default. feature/beams
Wed, 31 Aug 2016 10:44:53 +0200, by Jonatan Werpers
Added function to calculate a solution at a given time. feature/beams
Tue, 30 Aug 2016 10:44:17 +0200, by Jonatan Werpers
Beam: improvements. feature/beams
Tue, 30 Aug 2016 10:43:58 +0200, by Jonatan Werpers
ReplacableString: Added a more intuitive function name. feature/beams
Thu, 04 Aug 2016 15:24:04 +0200, by Jonatan Werpers
Added some stuff for default structs. Improved interface for beam. feature/beams
Wed, 03 Aug 2016 12:30:27 +0200, by Jonatan Werpers
Beam: Added ability to pick alphaII and alphaIII to control tau and sigma. feature/beams
Thu, 28 Jul 2016 12:50:43 +0200, by Jonatan Werpers
grid: Fixed returns of funcToXXX feature/beams
Thu, 28 Jul 2016 11:45:02 +0200, by Jonatan Werpers
multigrid.DiffOp: Bug fix. feature/beams
Fri, 15 Jul 2016 13:46:05 +0200, by Jonatan Werpers
Beam: Added tuning as a parameter to contructor. feature/beams
Fri, 15 Jul 2016 11:22:12 +0200, by Jonatan Werpers
scheme.Beam: Played around with tuning. feature/beams
Thu, 14 Jul 2016 10:41:32 +0200, by Jonatan Werpers
Added verbose flag to semiDefIneq and minors. feature/beams
Thu, 14 Jul 2016 10:40:57 +0200, by Jonatan Werpers
multiblock: Added a function to return number of points in each block for a mbGrid. Fixed a bug in DiffOp. feature/beams
Tue, 12 Jul 2016 17:08:15 +0200, by Jonatan Werpers
scheme.Beam: changes to possibly better operators. feature/beams
Tue, 12 Jul 2016 16:32:36 +0200, by Jonatan Werpers
More better printing. feature/beams
Fri, 01 Jul 2016 11:38:53 +0200, by Jonatan Werpers
improved printing in silent mode. feature/beams
Fri, 01 Jul 2016 09:46:02 +0200, by Jonatan Werpers
Fixed some bugs. feature/beams
Fri, 01 Jul 2016 09:45:47 +0200, by Jonatan Werpers
Improved anim.func.
Thu, 30 Jun 2016 14:44:18 +0200, by Jonatan Werpers
Added a timedependent version of Cdiff. feature/beams
Thu, 30 Jun 2016 14:43:43 +0200, by Jonatan Werpers
Clearer messages. feature/beams
Thu, 30 Jun 2016 14:10:26 +0200, by Jonatan Werpers
noname.testCfl: Added if the run was stable or not to the output. feature/beams
Tue, 28 Jun 2016 16:50:32 +0200, by Jonatan Werpers
Fixed type in scheme.Beam feature/beams
Tue, 28 Jun 2016 16:33:11 +0200, by Jonatan Werpers
Fixed sign error in beam BC penalties. feature/beams
Tue, 28 Jun 2016 14:05:17 +0200, by Jonatan Werpers
time.Rungekutta4SecondOrder: Started adding code to allow timedependent D,E,S. Might be buggy. feature/beams
Tue, 28 Jun 2016 13:21:02 +0200, by Jonatan Werpers
Fixed typo. feature/beams
Tue, 28 Jun 2016 13:19:45 +0200, by Jonatan Werpers
Made scheme boundary_condition return a cell array of penalties if there are several of them. feature/beams
Tue, 28 Jun 2016 13:11:14 +0200, by Jonatan Werpers
Merged with feature/grids. feature/beams
Mon, 27 Jun 2016 13:26:02 +0200, by Jonatan Werpers
Merged with default. feature/grids
Mon, 27 Jun 2016 13:24:59 +0200, by Jonatan Werpers
noname: Changed convergence to use grids in the representation of the solutions. feature/beams
Mon, 27 Jun 2016 13:23:46 +0200, by Jonatan Werpers
multiblock: Fixed some problems in DiffOp and Grid. feature/beams
Wed, 22 Jun 2016 14:44:03 +0200, by Jonatan Werpers
Fixed some typos in noname. feature/beams
Wed, 22 Jun 2016 14:42:49 +0200, by Jonatan Werpers
blockmatrix: added a test to make sure a zero matrix is a blockmatrix. Also added input parameter checking to zero() feature/beams
Wed, 22 Jun 2016 14:42:01 +0200, by Jonatan Werpers
Removed the data paramter from boundary_condition prototype. feature/beams
Wed, 22 Jun 2016 14:40:23 +0200, by Jonatan Werpers
Fixed a mistake in util.calc_borrowing.
Mon, 20 Jun 2016 13:03:35 +0200, by Jonatan Werpers
Merged feature/grid into feature/beams feature/beams
Thu, 16 Jun 2016 10:56:47 +0200, by Jonatan Werpers
multiblock: Implemented boundary conditions. feature/grids
Thu, 16 Jun 2016 09:21:17 +0200, by Jonatan Werpers
Removed old versions of blockmatrix implementations. feature/grids
Thu, 16 Jun 2016 09:06:57 +0200, by Jonatan Werpers
blockmatrix: Added function to convert regular matrix to blockmatrix. feature/grids
Wed, 15 Jun 2016 17:25:40 +0200, by Jonatan Werpers
blockmatrix: Added function to create zero blockmatrices. feature/grids
Wed, 15 Jun 2016 16:55:40 +0200, by Jonatan Werpers
blockmatrix: Added function to convert blockmatrix to a regular matrix. feature/grids
Wed, 15 Jun 2016 16:31:24 +0200, by Jonatan Werpers
blockmatrix: added function to calculate the block division for a given blockmatrix. feature/grids
Wed, 15 Jun 2016 16:28:22 +0200, by Jonatan Werpers
Added a test. feature/grids
Wed, 15 Jun 2016 15:54:53 +0200, by Jonatan Werpers
blockmatrix: Added functions to test for block matrcies and divisions. feature/grids
Wed, 15 Jun 2016 14:29:56 +0200, by Jonatan Werpers
multiblock.DiffOp: Fleshed out boundary_condition() a bit more feature/grids
Tue, 14 Jun 2016 15:45:28 +0200, by Jonatan Werpers
Exeendend tests of multiblock.DiffOp. feature/grids
Tue, 14 Jun 2016 15:07:34 +0200, by Jonatan Werpers
Merged feature/grids into feature/beams. feature/beams
Mon, 13 Jun 2016 16:59:02 +0200, by Jonatan Werpers
Merged default into feature/grids. feature/grids
Mon, 13 Jun 2016 16:50:16 +0200, by Jonatan Werpers
Paused work on boundaryGroups and getBoundaryNames. Are they really needed? feature/grids
Mon, 13 Jun 2016 16:49:11 +0200, by Jonatan Werpers
Added function to calculate bspline.
Thu, 26 May 2016 16:45:24 +0200, by Jonatan Werpers
Added function to return names of variables.
Thu, 26 May 2016 12:56:49 +0200, by Jonatan Werpers
time: Added ability to avarage of several runs.
Thu, 26 May 2016 12:52:59 +0200, by Jonatan Werpers
setFontSize: Added docstring.
Thu, 26 May 2016 12:51:11 +0200, by Jonatan Werpers
Added functions to easily time and profile a function.
Tue, 24 May 2016 08:42:27 +0200, by Jonatan Werpers
Added tests for boundary group. feature/grids
Wed, 06 Apr 2016 12:54:52 +0200, by Jonatan Werpers
Added methods for returning boundary names and boundary coordinates from Cartesian and Curvilinear grids. feature/grids
Mon, 04 Apr 2016 18:23:50 +0200, by Jonatan Werpers
Merged default into feature/grids. feature/grids
Mon, 21 Mar 2016 16:33:49 +0100, by Jonatan Werpers
Added a class for boundary groups. Added methods stubs and failing tests. feature/grids
Fri, 04 Mar 2016 17:20:30 +0100, by Jonatan Werpers
Added methods to hande boundaries to Grid. Added failing tests and method stubs. feature/grids
Fri, 04 Mar 2016 17:19:18 +0100, by Jonatan Werpers
sparse2cell: Added missing semicolons. feature/grids
Fri, 04 Mar 2016 17:18:20 +0100, by Jonatan Werpers
Moved multiblock grid to the multiblock package. Continued implementation. Added multiblock diffOp and removed some functions no longer needed. feature/grids
Thu, 03 Mar 2016 20:03:06 +0100, by Jonatan Werpers
Updated comments and definition to use introduced grid types. feature/grids
Thu, 03 Mar 2016 20:01:09 +0100, by Jonatan Werpers
Added sparse2cell function. feature/grids
Thu, 03 Mar 2016 14:00:27 +0100, by Jonatan Werpers
Made Multiblock a concrete class. Started implementation. feature/grids
Tue, 01 Mar 2016 13:47:46 +0100, by Jonatan Werpers
Removed some comments from Grid.m feature/grids
Mon, 29 Feb 2016 17:00:01 +0100, by Jonatan Werpers
Made some local changes to stichSchemes. feature/beams
Mon, 29 Feb 2016 15:40:34 +0100, by Jonatan Werpers
Merge with feature/grids. feature/beams
Mon, 29 Feb 2016 15:08:01 +0100, by Jonatan Werpers
Merge with default. feature/grids
Mon, 29 Feb 2016 15:01:58 +0100, by Jonatan Werpers
Removed some grid information from Scheme. feature/grids
Mon, 29 Feb 2016 14:56:51 +0100, by Jonatan Werpers
Updated equidistant and equidistantCurve to set the scaling of grids. feature/grids
Mon, 29 Feb 2016 14:55:19 +0100, by Jonatan Werpers
Fixed some bugs in Beam schemes. feature/beams
Mon, 29 Feb 2016 10:16:39 +0100, by Jonatan Werpers
Added and upgraded schemes for the beam equation in 1d and 2d. feature/beams
Fri, 26 Feb 2016 16:21:47 +0100, by Jonatan Werpers
Added a comment regardning structured grids. feature/grids
Fri, 26 Feb 2016 16:06:52 +0100, by Jonatan Werpers
Added functionallity for storing grid scaling on structured grids. feature/grids
Fri, 26 Feb 2016 16:06:03 +0100, by Jonatan Werpers
Refactored input parsing in Curvilinear. feature/grids
Thu, 25 Feb 2016 11:30:05 +0100, by Jonatan Werpers
Made evalOn a bit clearer. feature/grids
Thu, 25 Feb 2016 11:17:48 +0100, by Jonatan Werpers
Implemented Curvilinear and equdistantCurvilinear. feature/grids
Thu, 25 Feb 2016 11:10:25 +0100, by Jonatan Werpers
Merge with default. feature/grids
Wed, 24 Feb 2016 15:04:22 +0100, by Jonatan Werpers
grid.Cartesian: Added methods and test to fulfilll abstract class. feature/grids
Wed, 24 Feb 2016 15:01:54 +0100, by Jonatan Werpers
Merge in changes from default. feature/grids
Tue, 23 Feb 2016 13:25:43 +0100, by Jonatan Werpers
Updated function name reference. feature/grids
Tue, 23 Feb 2016 10:55:46 +0100, by Jonatan Werpers
Made reshape KronVector more general. Updated name and tests. feature/grids
Tue, 23 Feb 2016 10:31:19 +0100, by Jonatan Werpers
Correct method signatures in Grid.m feature/grids
Mon, 22 Feb 2016 15:56:33 +0100, by Jonatan Werpers
Fixed naming and added functions for converting vectors to matrices for structured grid. feature/grids
Mon, 22 Feb 2016 13:55:19 +0100, by Jonatan Werpers
Moved function for resizing vectors out of grid. feature/grids
Mon, 22 Feb 2016 13:34:50 +0100, by Jonatan Werpers
Added function for reshaping grid functions. Added size() method to structured grid. feature/grids
Mon, 22 Feb 2016 13:20:55 +0100, by Jonatan Werpers
Multiblock.m: Made methods lower case. Added a method. feature/grids
Mon, 22 Feb 2016 12:27:31 +0100, by Jonatan Werpers
Added abstract class Structured. feature/grids
Fri, 19 Feb 2016 16:09:02 +0100, by Jonatan Werpers
Added abstract methods to Grid. feature/grids
Fri, 19 Feb 2016 15:59:36 +0100, by Jonatan Werpers
Added function eval on. feature/grids
Fri, 19 Feb 2016 14:28:27 +0100, by Jonatan Werpers
Changed name from Mapped to Curvilinear. feature/grids
Thu, 18 Feb 2016 17:19:17 +0100, by Jonatan Werpers
Removed some extra lines, added some notes and comments. Fixed classname. feature/grids
Thu, 18 Feb 2016 17:17:41 +0100, by Jonatan Werpers
Added classes and functions for Cartesian and equidistant grids. feature/grids
Thu, 18 Feb 2016 16:46:02 +0100, by Jonatan Werpers
Added abstract classes for some different types of grids. feature/grids
Tue, 22 Dec 2015 11:59:55 +0100, by Jonatan Werpers
Added function to run all tests in a package. feature/grids
Tue, 22 Dec 2015 11:49:43 +0100, by Jonatan Werpers
Moved Curves and Tis from package grid to package parametrization. feature/grids
Mon, 21 Dec 2015 15:09:32 +0100, by Jonatan Werpers
Starting branch for adding abstract classes for grids, grid functions as well as implementing plotting and error calculation for these. feature/grids
Mon, 21 Dec 2015 15:06:16 +0100, by Jonatan Werpers
Added function to save current figure position as default.
Wed, 06 Apr 2016 10:08:59 +0200, by Jonatan Werpers
Added functions for printing and timing tasks in a script.
Tue, 05 Apr 2016 11:26:04 +0200, by Jonatan Werpers
Fixed function name bug in calc_borrowing and added ordinary operators.
Mon, 04 Apr 2016 18:34:12 +0200, by Jonatan Werpers
toString: Now allows 2d cell arrays of strings.
Mon, 21 Mar 2016 16:27:19 +0100, by Jonatan Werpers
setup 1d plot: Removed setting of axislabels. Made time in title optional.
Mon, 21 Mar 2016 16:23:24 +0100, by Jonatan Werpers
animate: Show the simulation time.
Mon, 21 Mar 2016 16:19:48 +0100, by Jonatan Werpers
Added function to set alla font sizes of a figure. Added default dpi to savepng.
Mon, 14 Mar 2016 13:52:37 +0100, by Jonatan Werpers
Removed ylim from setup1dPlot added some comments and fixed timestepper paramters.
Mon, 29 Feb 2016 15:00:52 +0100, by Jonatan Werpers
Fixed path to some superclasses.
Wed, 24 Feb 2016 15:03:19 +0100, by Jonatan Werpers
Added a settings file to checkSbplib()
Tue, 23 Feb 2016 14:33:50 +0100, by Jonatan Werpers
Added script to check all the code in a directory.
Tue, 23 Feb 2016 14:21:52 +0100, by Jonatan Werpers
Added a function to run all tests in a folder including all tests in subpackages.
Tue, 23 Feb 2016 13:22:00 +0100, by Jonatan Werpers
Added forgotten setting of k.
Tue, 09 Feb 2016 14:04:10 +0100, by Jonatan Werpers
Updated noname.calculateSolution to use the opt struct.
Tue, 09 Feb 2016 13:27:38 +0100, by Jonatan Werpers
Added a function for printing the axes positions of a subplot grid.
Mon, 08 Feb 2016 17:52:23 +0100, by Jonatan Werpers
Improved some comments in noname.animate
Mon, 08 Feb 2016 14:52:07 +0100, by Jonatan Werpers
Prepared for dynamic workload in animation.
Fri, 05 Feb 2016 11:29:19 +0100, by Jonatan Werpers
Refactored +anim.animate to be more clear.
Fri, 05 Feb 2016 10:49:16 +0100, by Jonatan Werpers
ReplaceableString: Added .appendFormat()
Fri, 05 Feb 2016 09:43:34 +0100, by Jonatan Werpers
Added a class for replacable strings. Works with linebreaks.
Thu, 04 Feb 2016 16:29:03 +0100, by Jonatan Werpers
Cleaned up the code for minors.
Wed, 03 Feb 2016 17:41:46 +0100, by Jonatan Werpers
toString: added support for symbolic expressions
Wed, 03 Feb 2016 17:41:19 +0100, by Jonatan Werpers
Added function for printing the minors of a matrix.
Wed, 03 Feb 2016 16:56:05 +0100, by Jonatan Werpers
Changed evolve so that it always stops as close to tend as possible.
Mon, 01 Feb 2016 17:08:19 +0100, by Jonatan Werpers
Fixed some class name, file name errors.
Wed, 27 Jan 2016 17:37:23 +0100, by Jonatan Werpers
Added savepng.m
Wed, 23 Dec 2015 21:42:23 +0100, by Jonatan Werpers
Fixed spelling.
Mon, 21 Dec 2015 12:19:35 +0100, by Jonatan Werpers
Added method for showing plotting samples in Color.
Fri, 18 Dec 2015 11:28:53 +0100, by Jonatan Werpers
Removed setupMov method on Discretization
Fri, 18 Dec 2015 11:28:07 +0100, by Jonatan Werpers
Changed variable name to make it clear boundary penatlies are currently skipped.
Fri, 18 Dec 2015 11:27:11 +0100, by Jonatan Werpers
I added remaining upwind operators.
Tue, 15 Dec 2015 16:38:17 +0100, by Jonatan Werpers
Fixed bug and made more robust.
Tue, 15 Dec 2015 16:38:02 +0100, by Jonatan Werpers
Corrected file permissions.
Mon, 14 Dec 2015 19:15:01 +0100, by Jonatan Werpers
noname.testCfl: Improved relyability and clarity.
Mon, 14 Dec 2015 19:09:03 +0100, by Jonatan Werpers
noname.benchmark: added deafult value to do_profile.
Mon, 14 Dec 2015 19:07:36 +0100, by Jonatan Werpers
noname.animate: Updated documentation. Fixed bug with start time. Added pause before starting.
Mon, 14 Dec 2015 18:57:02 +0100, by Jonatan Werpers
1d plot: Made it possible to have automatix axes.
Fri, 11 Dec 2015 09:31:46 +0100, by Jonatan Werpers
Added ability to see every timestep.
Wed, 09 Dec 2015 15:49:25 +0100, by Jonatan Werpers
Fixed some bugs regarding flowState determination.
Wed, 09 Dec 2015 15:48:58 +0100, by Jonatan Werpers
Changed so that closures accepts bc data instead of the closure cretaorChanged so that closures accepts bc data instead of the closure cretaors.
Tue, 08 Dec 2015 13:03:04 +0100, by Jonatan Werpers
Merged in feature/arclen-param (pull request #1)
Tue, 08 Dec 2015 10:42:20 +0100, by Martin Almquist
Close branch feature/arclen-param feature/arclen-param
Tue, 08 Dec 2015 10:42:20 +0100, by Martin Almquist
Added and changed some comments. Also my text editor removed a bunch of whitespace. feature/arclen-param
Tue, 08 Dec 2015 09:50:39 +0100, by Jonatan Werpers
Merged heads. feature/arclen-param
Mon, 07 Dec 2015 18:57:55 +0100, by Martin Almquist
Added error checking for all methods that use the derivative gp. Removed that from the to do list. Updated some comments. feature/arclen-param
Mon, 07 Dec 2015 18:51:41 +0100, by Martin Almquist
Splined in the other direction! Works great. Runs faster. Removed ugly fix outside [0,1] in spline(). Camelcased numerical_derivative(). feature/arclen-param
Mon, 07 Dec 2015 18:46:59 +0100, by Martin Almquist
fzero_vec, integral_vec and spline are now local functions in Curve. Renamed arcLengthStretch to arcLengthParametrization. Removed plot_derivative. Added some comments and extra lines + removed unneccesary lines. arcLength is now a method and not static. Constructor does not accept difference operator anymore. feature/arclen-param
Mon, 07 Dec 2015 17:24:28 +0100, by Martin Almquist
Merged default into feature/arclen-param feature/arclen-param
Mon, 07 Dec 2015 16:47:13 +0100, by Martin Almquist
Adapted testCfl to new opt style parameters in discrs.
Fri, 04 Dec 2015 16:46:32 +0100, by Jonatan Werpers
Made char BC in euler more robust.
Fri, 04 Dec 2015 16:35:30 +0100, by Jonatan Werpers
The arclength parameter function was slow because it called fzero. Now it is constructed once and for all with splines. Much better performance. feature/arclen-param
Sun, 06 Dec 2015 15:41:42 +0100, by Martin Almquist
Removed arclength property. Constructor compatible again. Translation and rotation are fast now, but ti is slow. feature/arclen-param
Sun, 06 Dec 2015 13:47:12 +0100, by Martin Almquist
Merged with deafult. feature/arclen-param
Wed, 02 Dec 2015 16:29:54 +0100, by Martin Almquist
Wave2dCurve: Removed some comments.
Wed, 02 Dec 2015 16:21:16 +0100, by Jonatan Werpers
Added bash script for compiling movie. Fixed so fig_mov respects figure size.
Wed, 02 Dec 2015 15:51:28 +0100, by Jonatan Werpers
Removed extra legends() call.
Wed, 02 Dec 2015 11:03:08 +0100, by Jonatan Werpers
Euler1D: added function to detect type of flow at a baoundary.
Tue, 01 Dec 2015 16:21:19 +0100, by Jonatan Werpers
Euler1d: Fixed sign bug.
Mon, 30 Nov 2015 17:58:33 +0100, by Jonatan Werpers
Added inflow bc for rho
Mon, 30 Nov 2015 15:23:09 +0100, by Jonatan Werpers
Closing this head
Mon, 30 Nov 2015 12:26:11 +0100, by Jonatan Werpers
Minor cleaning of Wave2dCurve.
Mon, 30 Nov 2015 12:20:22 +0100, by Jonatan Werpers
Added branch name. feature/arclen-param
Mon, 30 Nov 2015 12:13:22 +0100, by Jonatan Werpers
In Curve: Rearranged for speed. arc_length_fun is now a property of Curve. If it is not supplied, it is computed via the derivative and spline fitting. Switching to the arc length parameterization is much faster now. The new stuff can be tested with testArcLength.m (which should be deleted after that).
Sun, 29 Nov 2015 22:23:09 +0100, by Martin Almquist
In Curve: Added numerical FD differentiation if derivative is not supplied. Added arc length computation based on the derivative. Added arc length parameterization (but this function is very slow.). In +util: Added fzero_vec.m and integral_vec.m, which call fzero and integral but take vector arguments.
Sun, 29 Nov 2015 14:28:53 +0100, by Martin Almquist
Wave2DCurve: Fixed error in tau. Also made random guess at fixing theory from paper.
Mon, 30 Nov 2015 11:41:34 +0100, by Jonatan Werpers
Removed duplicate function.
Fri, 27 Nov 2015 10:06:10 +0100, by Jonatan Werpers
Fixed bugs.
Thu, 26 Nov 2015 17:09:57 +0100, by Jonatan Werpers
Added Dirichelt BC to Wave2dCurve.
Thu, 26 Nov 2015 16:24:25 +0100, by Jonatan Werpers
Added default argument to spdiag.
Thu, 26 Nov 2015 16:24:02 +0100, by Jonatan Werpers
Changed noname.animate and noname.Discretization to use a opt struct for timestepper options.
Wed, 25 Nov 2015 18:33:49 +0100, by Jonatan Werpers
Fixed bug in anim.animate for starting times != 0.
Wed, 25 Nov 2015 18:32:29 +0100, by Jonatan Werpers
Added the factor or 1/2 to the wall bc term as well.
Wed, 25 Nov 2015 15:41:10 +0100, by Jonatan Werpers
Fixed bugs and added outflow bc for rho. Added missing abs() added missing 1/2.
Wed, 25 Nov 2015 15:19:55 +0100, by Jonatan Werpers
Added more input parameter handling and fixed some bugs.
Mon, 23 Nov 2015 17:49:34 +0100, by Jonatan Werpers
Cleand time.Rungekutta4 a bit.
Mon, 23 Nov 2015 17:32:56 +0100, by Jonatan Werpers
Added missing axis_handle reference.
Mon, 23 Nov 2015 15:56:41 +0100, by Jonatan Werpers
Fixed problem with cell2sparse for empty matrices.
Mon, 23 Nov 2015 15:48:58 +0100, by Jonatan Werpers
Simplified implementation of time quantity plot.
Mon, 23 Nov 2015 14:55:58 +0100, by Jonatan Werpers
Updated printing stuff for animation functions.
Mon, 23 Nov 2015 14:34:02 +0100, by Jonatan Werpers
Made end of animated quantity plot nicer.
Mon, 23 Nov 2015 14:07:03 +0100, by Jonatan Werpers
Moved drawno out of plot update functions for huge performance boost.
Mon, 23 Nov 2015 13:54:01 +0100, by Jonatan Werpers
Added script for benchmarking a function.
Mon, 23 Nov 2015 13:51:31 +0100, by Jonatan Werpers
Fixed some errors in scheme.Schrodinger.m
Fri, 20 Nov 2015 10:28:27 +0100, by Jonatan Werpers
Made setup_1d_plot behave like matlab plot.
Fri, 20 Nov 2015 10:24:21 +0100, by Jonatan Werpers
Fixed mistakes in Schrodinger scheme. BC are now working.
Wed, 18 Nov 2015 17:15:02 +0100, by Jonatan Werpers
Fixed some typing and added function to plot eigen values of a matrix.
Wed, 18 Nov 2015 17:14:19 +0100, by Jonatan Werpers
Fixed error in bc.
Sat, 14 Nov 2015 19:48:23 -0800, by Jonatan Werpers
Euler1d. Fixed mistake in last commit.
Sat, 14 Nov 2015 19:30:27 -0800, by Jonatan Werpers
Refactored euler1d to have real methods.
Sat, 14 Nov 2015 19:26:30 -0800, by Jonatan Werpers
Euler1d: Created a general bc routine.
Sat, 14 Nov 2015 15:43:01 -0800, by Jonatan Werpers
Euler1d: Changed penalties to be calcualted numerically.
Sat, 14 Nov 2015 11:59:49 -0800, by Jonatan Werpers
Fixed coding errors in Euler1d.
Fri, 13 Nov 2015 16:39:45 -0800, by Jonatan Werpers
Added pausing option to noname.animate. Added characteristic bc to Euler1d.
Thu, 12 Nov 2015 17:31:33 -0800, by Jonatan Werpers
Added documentation to setup_1d_plot. Added updatableLine.m
Thu, 12 Nov 2015 12:03:45 -0800, by Jonatan Werpers
Minor renaming and clean up in 2d wave schemes.
Thu, 12 Nov 2015 09:47:04 -0800, by Jonatan Werpers
Euler1d: Fixed russian dissipation. Cleaned up. Added non-working BC.
Wed, 11 Nov 2015 19:21:38 -0800, by Jonatan Werpers
Changed default animation time to infinity.
Wed, 11 Nov 2015 19:20:32 -0800, by Jonatan Werpers
Fixed the upwind operators.
Wed, 11 Nov 2015 15:43:15 -0800, by Jonatan Werpers
Generalized spdiag. Added function for createing a banded sparse matrix.
Wed, 11 Nov 2015 15:15:26 -0800, by Jonatan Werpers
Performance improvement for Euler1d
Thu, 05 Nov 2015 17:10:57 -0800, by Jonatan Werpers
Made lots of updates to Euler1d.
Thu, 05 Nov 2015 16:33:53 -0800, by Jonatan Werpers
Made setup_1d_plot behave more like matlabs plot().
Thu, 05 Nov 2015 16:31:53 -0800, by Jonatan Werpers
Added upwind operators.
Thu, 05 Nov 2015 16:30:17 -0800, by Jonatan Werpers
Updated SolutionFile to use the new toString Method.
Thu, 05 Nov 2015 16:29:24 -0800, by Jonatan Werpers
Changed spdiag to be more like matlabs diag.
Thu, 05 Nov 2015 16:28:35 -0800, by Jonatan Werpers
Added toString function.
Thu, 05 Nov 2015 16:28:14 -0800, by Jonatan Werpers
Corrected description of saveeps.m
Thu, 05 Nov 2015 16:24:20 -0800, by Jonatan Werpers
Added a function for easily benchmarking a Discretization.
Thu, 05 Nov 2015 16:08:57 -0800, by Jonatan Werpers
Added Rk4 as it should be.
Thu, 05 Nov 2015 16:06:06 -0800, by Jonatan Werpers
Added Dictionary class. Added string conversions for a bunch of types. Deprecated some replaced functions.
Mon, 12 Oct 2015 10:38:53 +0200, by Jonatan Werpers
Added silent option to noname.testCfl.
Fri, 09 Oct 2015 10:52:42 +0200, by Jonatan Werpers
Added function for drawing fitting lines to convergence plots.
Tue, 06 Oct 2015 16:54:54 +0200, by Jonatan Werpers
Added black and white to Color.m
Tue, 06 Oct 2015 16:54:36 +0200, by Jonatan Werpers
Better error handeling in noname.convergence. Better handeling of T=0 in noname.calculateSolution
Tue, 06 Oct 2015 09:51:52 +0200, by Jonatan Werpers
Stoped using matFile object in SolutionFile. Changed to load for performance.
Tue, 06 Oct 2015 09:48:46 +0200, by Jonatan Werpers
Imporved error handling in saveeps. Fixed bug with vector fields in struct2string.
Tue, 06 Oct 2015 09:47:30 +0200, by Jonatan Werpers
Fixed really stupid error in errorMax.m
Tue, 06 Oct 2015 09:46:18 +0200, by Jonatan Werpers
Fixed a bunch of problems regarding convergence and saving solutions
Tue, 29 Sep 2015 09:22:22 +0200, by Jonatan Werpers
Fixed bug in step() for CdiffNonlin.
Mon, 28 Sep 2015 21:56:02 +0200, by Jonatan Werpers
Corrected parameter treatment in nonlin timesteppers.
Mon, 28 Sep 2015 13:23:52 +0200, by Jonatan Werpers
Removed repository inside +sbp to make it part of the root repo.
Mon, 28 Sep 2015 08:47:28 +0200, by Jonatan Werpers
Fixed bug in Rk4SecondOrderNonlin.
Mon, 28 Sep 2015 08:44:56 +0200, by Jonatan Werpers
Added function spdiag(). Fixed a bunch of bugs in the Wave2dCurve scheme.
Sun, 27 Sep 2015 22:15:37 +0200, by Jonatan Werpers
Made some changes to error functions and comparison functions before finalizing convergence script.
Fri, 25 Sep 2015 14:54:26 +0200, by Jonatan Werpers
Made calculateSolution save the discretization instead of a handle to contructor.
Fri, 25 Sep 2015 14:51:18 +0200, by Jonatan Werpers
Added some utility functions to SolutionFile.m
Fri, 25 Sep 2015 14:50:01 +0200, by Jonatan Werpers
Added function to calculate convergence given errors. Added function to print convergence table (not finished.)
Fri, 25 Sep 2015 11:08:47 +0200, by Jonatan Werpers
Moved structIsSubset to it's own file.
Wed, 23 Sep 2015 09:43:53 +0200, by Jonatan Werpers
Added functionality for saveing to eps from plotSolutions.
Wed, 23 Sep 2015 09:29:53 +0200, by Jonatan Werpers
Decoupled plotting and timesteppers. Added possibility of different plot_types. Added functions for printing and plotting solution file content.
Tue, 22 Sep 2015 17:35:58 +0200, by Jonatan Werpers
Fixed bug in SolutionsFile.m. Updated calculateSolution to also save a function handle to the Discr constructor.
Tue, 22 Sep 2015 17:10:51 +0200, by Jonatan Werpers
Added function to merge SolutionFiles.
Tue, 22 Sep 2015 14:52:13 +0200, by Jonatan Werpers
Added utility function findFiledWidth. Added function for calculating and saving solutions.
Tue, 22 Sep 2015 14:27:21 +0200, by Jonatan Werpers
Improved progress indication for stepN
Tue, 22 Sep 2015 14:25:59 +0200, by Jonatan Werpers
Added abstract methods to allow for comparing of solutions. Added a bunch of error functions.
Tue, 22 Sep 2015 13:36:45 +0200, by Jonatan Werpers
Added functions for converting vectors to and from cell format.
Tue, 22 Sep 2015 09:46:20 +0200, by Jonatan Werpers
Fixed initialization of step counter in timesteppers.
Tue, 22 Sep 2015 08:41:28 +0200, by Jonatan Werpers
Added function to calculate an aligned timestep.
Tue, 22 Sep 2015 08:35:57 +0200, by Jonatan Werpers
Allowed no defult answer in yesnoQuestion.m
Mon, 21 Sep 2015 18:01:57 +0200, by Jonatan Werpers
Added utility function for asking the user a yes or no question.
Mon, 21 Sep 2015 17:58:04 +0200, by Jonatan Werpers
Added class for handleing .mat files as a key-value store.
Mon, 21 Sep 2015 17:41:18 +0200, by Jonatan Werpers
Changed to cleaner way of gett the current folder.
Mon, 21 Sep 2015 17:40:07 +0200, by Jonatan Werpers
Added functions for converting structs to string representations.
Mon, 21 Sep 2015 14:50:51 +0200, by Jonatan Werpers
Added version function sbplibVersion.m
Mon, 21 Sep 2015 10:05:21 +0200, by Jonatan Werpers
First try at interface implementation in WaveCurve2s
Mon, 21 Sep 2015 09:42:15 +0200, by Jonatan Werpers
Attempt att optimization of CdiffNonlin.
Fri, 18 Sep 2015 15:12:44 +0200, by Jonatan Werpers
Added some smartness to evolve with progress.`
Fri, 18 Sep 2015 13:30:19 +0200, by Jonatan Werpers
Added a cfl paramater to getTimestepper in Discretization. Added function to get cfl value for a Discr.
Fri, 18 Sep 2015 12:50:52 +0200, by Jonatan Werpers
Added CdiffNonlin timestepper. Probably fixed a bug with Cdiff. Added default arguments to Rk4SecondOrderNonlin.
Thu, 17 Sep 2015 19:19:58 +0200, by Jonatan Werpers
Initial commit.
Thu, 17 Sep 2015 10:12:50 +0200, by Jonatan Werpers

less more | rev 1347: (0) tip

Mercurial > repos > public > sbplib

graph